Renault Laguna III Grandtour

Drivetrain components and spare parts for Renault Laguna III Grandtour.

Products for Renault Laguna III Grandtour

44 products
25 - 44 of 44
Item no.:350455
  • Position: Front left, Front right, Outer
  • Seal diameter: 56,7 mm
  • Inner splines: 36
  • Total length: 152,5 mm
  • Splines wheel side: 27
Item no.:210195
  • Position: Front right
  • Total length: 962 mm
  • Splines gearbox side: 30
  • Splines wheel side: 27
  • ABS teeth: 0
Item no.:0504387
  • Position: Outer
  • Inner splines: 33
  • Outer diameter: 89 mm
  • Splines wheel side: 27
  • ABS teeth: 0
Item no.:0502874
  • Position: Outer
  • Inner splines: 37
  • Outer diameter: 95 mm
  • Splines wheel side: 27
  • ABS teeth: 0
Item no.:116801
  • Position: Front left
  • Total length: 643 mm
  • Splines gearbox side: 30
  • Splines wheel side: 27
  • ABS teeth: 0
Item no.:1142253
  • Position: Front left
  • Inner splines: 33
  • Total length: 676 mm
  • Splines gearbox side: 26
  • ABS teeth: 0
Item no.:355676
  • Position: Front left, Front right, Outer
  • Seal diameter: 57 mm
  • Inner splines: 37
  • Outer splines: 27
  • Joint diameter: 103,5 mm
Item no.:3516407
  • Position: Front, Outer
  • Inner splines: 32
  • Outer diameter: 88 mm
  • Splines wheel side: 27
  • ABS teeth: 0
Item no.:212376
  • Position: Front right
  • Total length: 977 mm
  • Splines gearbox side: 39
  • Splines wheel side: 27
  • ABS teeth: 0
Item no.:212793
  • Position: Front right
  • Total length: 990 mm
  • Splines gearbox side: 34
  • Splines wheel side: 27
  • ABS teeth: 0
Item no.:113374
  • Position: Front left
  • Total length: 635 mm
  • Splines gearbox side: 34
  • Splines wheel side: 27
  • ABS teeth: 0
Item no.:214425
  • Position: Front right
  • Total length: 990 mm
  • Splines gearbox side: 30
  • Splines wheel side: 27
  • ABS teeth: 0
Item no.:110675
  • Position: Front left
  • Total length: 619 mm
  • Splines gearbox side: 30
  • Splines wheel side: 27
  • ABS teeth: 0
Item no.:144159
  • Position: Front left, Inner
  • Seal diameter: 40 mm
  • Inner splines: 30
  • Total length: 185 mm
  • Splines gearbox side: 26
Item no.:0600631
  • Total length: 110 mm
Item no.:0638424
  • Total length: 115 mm
Item no.:2194450
  • Position: Front right
  • Total length: 967 mm
  • Splines gearbox side: 39
  • Splines wheel side: 27
  • ABS teeth: 0
Item no.:213197
  • Position: Front right
  • Total length: 942 mm
  • Splines gearbox side: 26
  • Splines wheel side: 27
  • ABS teeth: 0
Item no.:118810
  • Position: Front left
  • Total length: 642 mm
  • Splines gearbox side: 39
  • Splines wheel side: 27
Showing 25–44 of 44 products

Drivetrain for Renault Laguna III Grandtour

The Renault Laguna III Grandtour is renowned for its comfort and practicality as a spacious estate car. Maintaining these qualities demands a drivetrain in first-class condition. The drivetrain is the system responsible for transferring engine power to the wheels, and on a front-wheel-drive car like the Laguna III Grandtour, this involves a complex assembly of components operating under continuous load. A properly functioning drivetrain is crucial not only for reliable traction, but also for ride comfort and safety. For a family estate that is frequently loaded with luggage or used for long motorway journeys, the stresses placed on the drive shafts and joints are substantial. Investing in high-quality spare parts ensures your car retains its stability and that power transfer remains smooth, free from jerking or unwanted noises.

How the drivetrain is designed on the Renault Laguna III Grandtour

The drivetrain layout in a Renault Laguna III Grandtour follows the classic setup for front-wheel-drive vehicles with a transverse engine. Power travels from the engine through the gearbox and out to the road wheels via two drive shafts. Each drive shaft is fitted with two joints: an inner joint positioned closest to the gearbox and an outer CV joint situated at the wheel hub. The outer joint is especially critical, as it must handle both power transmission and steering angle adjustments simultaneously. The entire assembly is protected by rubber CV boots that retain the lubricating grease whilst sealing out road grit, moisture and salt—vital for protecting component lifespan through harsh European winters. On certain engine variants, an intermediate shaft supported by a centre bearing is also fitted to balance power delivery across the longer side.

Common faults and symptoms

There are several clear warning signs that the drivetrain on your Renault Laguna III Grandtour is wearing out and requires inspection. One of the most typical symptoms is a distinct clicking or knocking noise when accelerating on full steering lock; this usually points to a worn outer constant velocity joint. If you experience vibrations through the steering wheel or bodywork during acceleration, this often indicates an out-of-balance driveshaft or play in the inner joint. Another critical issue is visible grease sprayed onto the inside of the road wheel or wheel arch, indicating a split CV boot. If left unaddressed, dirt and grit penetrate the joint, quickly destroying the finely machined bearing surfaces and leading to far more expensive repairs.

Common parts to replace on the Renault Laguna III Grandtour

For Renault Laguna III Grandtour owners, drive shafts and outer CV joints are the parts most frequently in need of replacement after many kilometres of dependable service. We stock a comprehensive selection covering various versions of drive shafts for Renault Laguna III Grandtour, tailored to suit different engine configurations and transmissions. We also supply exact-fit outer CV joints for Renault Laguna III Grandtour. Please bear in mind that drive shafts differ between the left and right sides, with one side usually being longer. Choosing the correct component is essential, as dimensions and splines vary depending on whether the car has a manual or automatic gearbox, as well as its engine power output. Replacing worn driveline parts promptly helps prevent costly secondary damage to your gearbox and wheel bearings.

Finding the correct part for your Renault Laguna III Grandtour

Navigate directly to the relevant category for your Renault Laguna III Grandtour:

When dealing with a model that presents various potential drivetrain faults, starting in the right section saves valuable time. By comparing the exact component sections for the Renault Laguna III Grandtour, it is straightforward to distinguish between faults in the drive shaft, CV joint or prop shaft, taking you straight to the products that match your symptoms and vehicle specification.

Selecting the appropriate category allows you to quickly inspect available options and compare technical specifications to ensure an exact fit every time.

Why shop with CVJoint24

CVJoint24 is the international shop of a Swedish driveline specialist, dedicated to supplying premium-quality car parts at competitive prices, backed by extensive technical knowledge. When you purchase components for your Renault Laguna III Grandtour from us, you can rely on receiving precision-engineered, durable parts. Because we focus exclusively on driveline systems, we are exceptionally well placed to support you with tailored technical advice. Finding the right part is straightforward by selecting your car's make, model and engine, and with dispatch straight from our central warehouse in Helsingborg, Sweden, we are the trusted partner for both DIY mechanics and professional garages across the EU.

Frequently Asked Questions about Drivetrain Parts for Renault Laguna III Grandtour - Find the Right Parts

How do I know if my Renault Laguna III Grandtour needs a new drive shaft?

The most common signs are vibrations through the car under acceleration or knocking noises from underneath. If the vibrations stop as soon as you let off the throttle, it is often the inner joint of the drive shaft that is worn.

Does the same CV joint fit all engine variants of the Laguna III Grandtour?

No, CV joints and drive shafts can differ depending on engine size, gearbox type (manual/automatic) and specific chassis setups. Always select your vehicle make, model and engine to find the correct matching part.

What causes the clicking noise on full steering lock?

This is a classic symptom of a worn outer CV joint. As the internal bearings wear, excessive play develops, producing a rhythmic clicking sound whenever the joint operates at an angle.

Is it difficult to replace a drive shaft on a Renault Laguna III?

It requires the right tools and reasonable mechanical experience. You will need to dismantle parts of the suspension and, in some cases, drain the gearbox oil if the shaft inserts directly into the transmission. We advise consulting a repair manual or using a professional garage if you are unsure.

Why is it important to replace a damaged CV boot immediately?

The CV boot protects the constant velocity joint. If it splits, the grease leaks out and road grit gets in, ruining the joint within just a few tens of kilometres. Replacing a boot promptly saves the expense of an entire new CV joint.

How many splines does a CV joint have for the Laguna III Grandtour?

The spline count varies between different versions of the Laguna III. It is therefore essential to check the specifications on the product page or count the teeth on your original part if you are in any doubt.