Renault Master

Spare parts and drivetrain components for the Renault Master.

Products for Renault Master

62 products
49 - 62 of 62
Item no.:1183166
  • Splines wheel side: 23
  • Total length: 645 mm
  • Tripod shaft diameter: 29,95 mm
  • ABS teeth: 44
Item no.:7317101
  • Position: Front right
  • Splines gearbox side: 39
  • Splines wheel side: 28
  • Total length: 1,153 mm
  • Joint diameter: 101 mm
Item no.:215115
  • Position: Front right
  • Splines gearbox side: 39
  • Splines wheel side: 28
  • Total length: 1,125 mm
  • Joint diameter: 101 mm
Item no.:2117337
  • Position: Front right
  • Splines gearbox side: 39
  • Splines wheel side: 28
  • Total length: 1,125 mm
  • ABS teeth: 51
Item no.:117662
  • Position: Front left
  • Splines wheel side: 28
  • Total length: 663 mm
  • Thread size: M24x1.5
Item no.:0873179
  • Inner diameter: 45 mm
  • Bearing thickness: 19 mm
  • Hole spacing c/c: 170 mm
Item no.:244429
  • Position: Inner
  • Inner splines: 27
  • Seal diameter: 30 mm
  • Total length: 451 mm
  • Outer splines: 39
Item no.:0695287
  • Total length: 113 mm
Item no.:146078
  • Position: Inner
  • Inner splines: 27
  • Seal diameter: 39 mm
  • Total length: 183 mm
  • Joint diameter: 88 mm
Item no.:628670
  • Position: Rear
  • Total length: 1,251 mm
  • Number of joints: 3
  • Outer diameter 1: 16 mm
  • Bolt circle diameter 1: 120 mm
Item no.:0891278
  • Inner diameter: 45 mm
  • Bearing thickness: 19 mm
  • Hole spacing c/c: 170 mm
Item no.:0602575
  • Total length: 113 mm
Item no.:621405
  • Position: Rear
  • Total length: 1,251 mm
  • Number of joints: 3
  • Outer diameter 1: 16 mm
  • Bolt circle diameter 1: 120 mm
Item no.:0642077
  • Total length: 113 mm
Showing 49–62 of 62 products

Drivetrain for Renault Master

For decades, the Renault Master has been one of the most popular vans on European roads, known for its payload capacity and versatility. The drivetrain in a Renault Master is subjected to substantial strain, especially during stop-start city driving or when hauling heavy loads on the motorway. As a specialist in drivetrain parts, we understand the importance of every power transmission component maintaining the highest quality. Our range for the Renault Master covers everything from complete drive shafts to dedicated repair kits for CV joints and ABS rings. By choosing the right spare parts, you not only extend the lifespan of your vehicle but also ensure a safe and stable driving experience in all conditions.

How the Renault Master drivetrain is built

The drivetrain on a Renault Master is engineered to handle high torque from the van's diesel engines and transfer this power to the wheels efficiently. Depending on the configuration, a Renault Master can be front-wheel drive or rear-wheel drive, which affects the design of the drive shafts. A central component of the system is the Renault Master drive shaft, connecting the gearbox to the wheel hubs. At the wheels sits the outer CV joint, which accommodates steering angles, while the inner joint accommodates axial movement as the suspension works. The entire assembly is shielded by CV boots that keep the grease in place and dirt out, which is vital for component durability in demanding climates.

Common faults and symptoms

There are several clear signs that the drivetrain on your Renault Master is wearing out. One of the most frequent symptoms is a clicking or knocking sound from the front end on full steering lock, which usually indicates a worn outer constant velocity joint on your Renault Master. If you experience vibrations throughout the van under acceleration instead, this may point to wear in the inner CV joints or an imbalance in the driveshaft itself. Another common issue on these commercial vans is a cracked Renault Master ABS ring due to corrosion, causing the ABS warning light to illuminate or the brakes to pulse erratically under braking. Ignoring these symptoms can result in complete mechanical failure and costly repairs.

Common parts to replace on the Renault Master

Due to the vehicle's weight and heavy-duty usage, certain components are more susceptible to wear than others. We have organised our range so you can quickly locate what you need for your repair. Here are the most sought-after categories for this model:

  • Drive shafts for Renault Master – complete shafts for fast, straightforward replacement.
  • Outer CV joints for Renault Master – often supplied with fitting accessories and grease.
  • ABS rings for Renault Master – to restore correct braking system performance.

By replacing worn components promptly, you prevent secondary damage to wheel bearings and the gearbox, which is crucial for commercial vehicles where every hour in the garage means lost income.

How to find the right part for your Renault Master

Select the relevant subcategory for your Renault Master:

On a vehicle with several possible drivetrain issues, it is wise to start in the correct section immediately. By comparing the exact component areas for the Renault Master, it becomes easier to distinguish between drive shaft, CV joint, or prop shaft faults and proceed to the page that best matches your symptoms and fitment.

Pinpointing the exact component for your Renault Master can sometimes be challenging, as specifications vary by engine option, gearbox type, and model year. The most reliable way to find the correct fit is to filter by your van's make, model, and engine variant. You will then see only the car parts that are compatible with your specific vehicle. It is still always recommended to verify technical details, such as the spline count on the constant velocity joint or the total length of the drive shaft, as variations can occur within the same model year. Our expertise in drivetrain components ensures our database stays accurate and reliable, giving you a smooth shopping experience.

Why buy from CVJoint24?

As a Swedish driveline specialist, we offer a unique combination of in-depth technical knowledge and an extensive selection of quality products. We focus exclusively on power transmission, giving us the expertise that general motor factors often lack. When you buy from us, you receive parts manufactured with high precision and durability, designed to cope with harsh conditions and the demands placed on a working Renault Master. By filtering by your exact model and engine, you minimise the risk of ordering the wrong part, and our rapid dispatch from our Swedish warehouse ensures your van is back on the road without delay. We are your reliable partner for drive shafts, joints, and accessories.

Frequently Asked Questions about Drivetrain Parts for Renault Master

How do I know if my Renault Master needs a new drive shaft?

The most common symptoms are heavy vibrations under acceleration or a knocking noise from beneath the vehicle. If the vibrations cease as soon as you lift off the accelerator, it is often the inner CV joint on the drive shaft that is worn.

Does the same drive shaft fit both front-wheel drive and rear-wheel drive Renault Master models?

No, drive shafts differ significantly depending on whether the van is front-wheel drive or rear-wheel drive. Always select your vehicle's exact make, model and engine to find the correct version for your van.

Why is the ABS warning light on in my Renault Master?

A very common culprit on the Renault Master is a cracked or corroded ABS ring. When the ring breaks, the sensor cannot read wheel speed correctly, which triggers the warning light.

What is the benefit of replacing the complete drive shaft instead of just a CV joint?

Replacing a complete drive shaft is usually much faster and mechanically simpler. In addition, you get brand-new inner and outer CV joints along with fresh CV boots, providing a far more durable, long-term solution for your Renault Master.

How often should I inspect the CV boots on my Renault Master?

We recommend checking the CV boots at every routine service or seasonal tyre change. A split boot allows grease to escape and road dirt to enter, which will destroy the CV joint in very short order.

Can I replace the ABS ring myself on my Renault Master?

Yes, it is entirely possible if you have the right tools and mechanical experience. It usually requires removing the CV joint in order to press or heat-shrink the new ring accurately into place.