Renault Sandero Stepway II

Welcome to CVJoint24, your Swedish driveline specialist for the Renault Sandero Stepway II. We understand the importance of an exact fit when it comes to power transmission, which is why...

Products for Renault Sandero Stepway II

9 products
1 - 9 of 9
Item no.:118588
  • Position: Front left
  • Splines gearbox side: 26
  • Splines wheel side: 23
  • Total length: 648 mm
  • Joint diameter: 79 mm
Item no.:210674
  • Position: Front right
  • Splines gearbox side: 26
  • Splines wheel side: 23
  • Total length: 894 mm
  • Joint diameter: 84 mm
Item no.:3545775
  • Position: Outer
  • Inner splines: 30
  • Splines wheel side: 23
  • Outer diameter: 84 mm
Item no.:3592522
  • Position: Outer
  • Inner splines: 28
  • Splines wheel side: 21
  • Outer diameter: 76 mm
Item no.:1196420
  • Position: Front left
  • Splines gearbox side: 26
  • Splines wheel side: 23
  • Total length: 651 mm
  • Joint diameter: 84 mm
Item no.:117468
  • Position: Front left
  • Splines gearbox side: 25
  • Splines wheel side: 23
  • Total length: 660 mm
Item no.:212948
  • Position: Front right
  • Splines gearbox side: 25
  • Splines wheel side: 23
  • Total length: 900 mm
Item no.:3554256
  • Position: Front, Outer
  • Inner splines: 28
  • Seal diameter: 49 mm
  • Outer splines: 23
  • Thread size: M20X1,5
Item no.:143529
  • Position: Inner
  • Inner splines: 21
  • Splines gearbox side: 26
  • Seal diameter: 40 mm
  • Total length: 170 mm

Drivetrain for Renault Sandero Stepway II

The Renault Sandero Stepway II is a robust crossover version of the popular hatchback, engineered to tackle both city motoring and rougher ground. To preserve the car’s characteristic handling and dependability, a fully functional drivetrain is essential. The power transmission is the core of your car’s movement, and every part from the gearbox out to the road wheels must work together seamlessly. At CVJoint24, we specialise in these very parts, offering a range tailored precisely to meet the technical requirements of the Renault Sandero Stepway II.

Selecting the right spare parts for your drivetrain is crucial to avoid unnecessary wear on other mechanical components. An incorrect fit can cause vibrations, unwanted noises and, in the worst cases, complete breakdown on the road. As Swedish driveline specialists, we focus on supplying parts that not only fit physically, but also match or exceed the quality of original equipment. By concentrating exclusively on drivetrain expertise, we provide deeper technical product knowledge than general car parts retailers, giving you total peace of mind in your purchase.

How the drivetrain is engineered on the Renault Sandero Stepway II

The drivetrain on a Renault Sandero Stepway II is configured around a transverse engine and front-wheel drive. The system primarily consists of two drive shafts that transmit torque from the gearbox to the front wheels. Each drive shaft is fitted with two CV joints: an inner joint positioned closest to the gearbox and an outer joint located at the wheel. The outer joint is designed to accommodate wide steering angles, which is necessary for the car to steer while under power. The inner joint, on the other hand, is engineered to manage the axial plunge that occurs as the suspension travels up and down.

Because the Stepway model features slightly higher ground clearance than the standard hatchback, the driveshafts and joints operate at specific angles, placing high demands on material fatigue strength and effective lubrication. The CV joints are protected by flexible rubber CV boots that retain the lubricating grease and seal out road dirt and moisture. If a boot tears, the precision-ground surfaces inside the joint are exposed to contaminants, quickly causing severe wear. Understanding this assembly is the first step towards identifying when it is time to service or replace components on your Renault.

Common faults and symptoms

There are several distinct signs that the drivetrain on your Renault Sandero Stepway II is beginning to wear out. One of the most typical symptoms of a failing outer CV joint is a rhythmic clicking or knocking sound heard on full steering lock during acceleration, such as when executing a U-turn or pulling out of a tight junction. This noise occurs when the steel balls in the joint travel across worn grooves in the housing. If neglected, the joint can eventually seize or shear completely, leaving the vehicle stranded.

Symptoms of a worn inner constant velocity joint are usually quite different, often presenting as vibrations through the cabin or chassis under acceleration, especially within certain speed ranges. These vibrations can sometimes be mistaken for unbalanced wheels, but if they disappear the moment you lift off the accelerator, the inner joint is frequently the culprit. Another common issue is split boots. If you spot grease splattered on the inside of the wheel rim or underneath the car, a CV boot has torn. Replacing a damaged boot promptly can often save the CV joint itself from needing complete replacement.

Common parts to replace on the Renault Sandero Stepway II

For the Renault Sandero Stepway II, we have identified several key components that are most frequently required during driveline repairs. Our range includes multiple complete drive shaft options covering the majority of engine and gearbox combinations for this model. Replacing the complete drive shaft is often a cost-effective solution, as you receive both the inner and outer joints alongside brand-new boots fully assembled, reducing workshop labour time and eliminating the risk of subsequent assembly errors.

Alongside complete shafts, we supply individual joints for repairs where only one section of the axle is compromised. We stock dedicated outer CV joints and inner CV joints commonly fitted to the Sandero Stepway II. Offering these individual parts allows you to carry out a targeted, economical repair. All our car parts are manufactured to strict specifications to ensure that splines, overall lengths and ABS rings match the original vehicle specifications down to the millimetre, guaranteeing a trouble-free installation.

How to find the right part for your Renault Sandero Stepway II

Navigate directly to the appropriate component category for your Renault Sandero Stepway II:

On a vehicle with several potential drivetrain issues, it pays to start in the correct category straight away. By comparing the exact component sections for the Renault Sandero Stepway II, it becomes much simpler to distinguish between drive shaft, CV joint or propeller shaft faults and to proceed to the page that best matches your symptoms and fitment.

Once you have located the relevant category, you can inspect each product’s technical specifications to verify compatibility. Should you have any doubts, our knowledgeable customer support team is always on hand to assist you. Our goal is to ensure you order the correct component first time, saving both time and workshop costs on your repair.

Why buy from CVJoint24?

As Swedish driveline specialists, we combine dedicated technical expertise with outstanding availability. We hold our own stock at our main warehouse in Helsingborg, Sweden, giving us complete control over quality and enabling rapid dispatch across the entire EU. We want you to shop with complete confidence, which is why we provide an accurate fitment guarantee. Simply select your car by its make, model and engine, and if an ordered part should ever fail to fit as expected, we will help you sort the correct item without fuss.

We focus exclusively on drivetrains and power transmission components, allowing us to maintain substantially greater catalogue depth than general parts distributors. This means we frequently stock niche parts that other retailers struggle to supply. When you buy from CVJoint24, you receive more than just a spare part: you gain access to decades of specialist experience and a dependable partner for vehicle maintenance. The correct part, swift service and expert technical support are the foundation of everything we do.

Frequently asked questions about Renault Sandero Stepway II – Drivetrain & Spare Parts

How do I know if my Renault Sandero Stepway II needs a new drive shaft?

The most common signs are vibrations under acceleration or clicking noises when turning. If you notice grease leaking from the CV boots, you should inspect the shaft immediately.

What is the difference between the inner and outer CV joint on my car?

The outer CV joint sits by the wheel and accommodates steering angles, whilst the inner joint sits by the gearbox and accommodates suspension movement. They produce different symptoms when worn.

Can I replace just the CV boot instead of the entire CV joint?

Yes, if you catch a damaged boot early before dirt and moisture damage the internal components of the joint, replacing the boot and repacking it with fresh grease may be sufficient.

Do all drive shafts fit all Sandero Stepway II models?

No, there are variations depending on the engine and gearbox. Always select your vehicle's make, model and engine variant in our store to find the exact part for your car.

What does your fitment guarantee mean?

It means that when you select your vehicle's make, model and engine variant and order the recommended part, we guarantee it will fit. If it does not, we will arrange a free exchange.

How quickly are the parts delivered for my Renault?

We offer fast delivery across the EU for most orders placed before our cut-off time, shipped directly from our central warehouse in Helsingborg, Sweden.