Saab 9.3

Spare parts and drivetrain components for Saab 9.3.

Products for Saab 9.3

50 products
49 - 50 of 50
Item no.:514816
  • Position: Rear right
  • Splines gearbox side: 34
  • Splines wheel side: 30
  • Total length: 812 mm
  • Diameter 1: 82 mm
Item no.:416187
  • Position: Rear left
  • Splines gearbox side: 34
  • Splines wheel side: 30
  • Total length: 762 mm
  • Diameter 1: 82 mm
Showing 49–50 of 50 products

Drivetrain for Saab 9.3

The drivetrain of a Saab 9.3 is a sophisticated setup that demands top-quality components to preserve the car's celebrated driving dynamics and safety. As a driveline specialist, we offer an extensive range covering everything from the core of the power transmission to the finest safety elements. Maintaining the drivetrain is essential to prevent costly consequential damage to the gearbox and suspension. We have assembled the most relevant parts to help you find the right components quickly and easily. Focusing on accurate fitment and long-term durability, our parts are selected to satisfy the demands of a modern premium car such as the Saab 9.3.

How the drivetrain is engineered on the Saab 9.3

The Saab 9.3 is built on a front-wheel-drive architecture where power transfers from the engine through the gearbox to the front wheels via two drive shafts. Each drive shaft is fitted with two joints: an inner CV joint mounted against the gearbox and an outer CV joint connecting to the wheel hub. This design accommodates suspension travel and steering angles whilst ensuring constant power delivery. On vehicles equipped with anti-lock brakes, an ABS ring is also installed—usually on the outer CV joint—transmitting vital signals to the vehicle safety systems. Understanding this layout is essential when identifying which component to replace once noises or vibrations occur in your Saab 9.3.

Common faults and symptoms

There are several clear indications that drivetrain components on your Saab 9.3 are wearing out. One of the most frequent symptoms is a clicking or knocking sound on full steering lock, which almost always indicates a worn outer CV joint on your Saab 9.3. If you experience vibrations through the steering wheel or chassis under acceleration instead, the inner joint or the drive shaft itself is often unbalanced or worn. Another common issue is an illuminated ABS warning light or a pulsating brake pedal at low speeds, typically caused by a cracked or corroded ABS ring. Addressing these symptoms promptly prevents minor issues from turning into complete breakdowns on the road.

Common parts to replace on the Saab 9.3

For the Saab 9.3, we have identified several key components that regularly require inspection to maintain reliability. Our range for this model currently covers the following categories:

  • Drive shafts: We supply multiple drive shaft options for the Saab 9.3, matched to different engine variants and gearboxes.
  • Outer CV joints: With multiple outer CV joint options for the Saab 9.3, we cater for most model years and variants.
  • Inner CV joints: We also provide inner CV joints for the Saab 9.3 to resolve vibrations during acceleration.
  • ABS rings: There are 4 different types of ABS ring for the Saab 9.3 to keep your braking system operating reliably.

These parts are critical to vehicle operation, and we always advise checking the condition of the CV boots during servicing, as a split boot quickly allows dirt in to ruin the joint.

How to find the right part for your Saab 9.3

Navigate to the relevant subcategory for your Saab 9.3:

On a vehicle with several possible driveline faults, it pays to start directly in the correct category. Comparing the specific subcategories for the Saab 9.3 makes it simpler to distinguish between problems in the drive shaft, constant velocity joint or prop shaft, taking you straight to the page that matches your symptoms and fitment needs.

Selecting the right spare part for your Saab 9.3 can sometimes be tricky, as specifications vary by engine size, transmission type and production year. The easiest way to ensure accurate fitment is to select your car's make, model and engine variant in our store. Choosing your exact vehicle details automatically filters our catalogue so you only see components compatible with your car. This prevents ordering mistakes and saves valuable time during installation. If you are unsure whether you need a complete driveshaft or just a CV joint, verify the spline count and diameter of your existing parts, as these technical details are crucial for a precise fit on your Saab 9.3.

Why buy from CVJoint24

CVJoint24 is the international shop of a Swedish driveline specialist, and we take great pride in our deep technical expertise. When ordering parts for your Saab 9.3 from us, you receive high-grade components backed by specialists who understand your car's technical demands. By concentrating solely on drivetrain components, we offer a level of category expertise that general car-parts retailers rarely match. With a focus on product quality, exact fitment and customer support that answers your technical questions, we are the trusted choice for Saab owners. Our goal is to provide an outstanding range of drive shafts, joints and ABS rings, dispatched swiftly across the EU directly from our central warehouse in Helsingborg, Sweden.

Frequently Asked Questions about Drivetrain Parts for Saab 9 3 – High-Quality Spare Parts

How do I know whether it is the outer or inner CV joint that has failed on my Saab 9 3?

A faulty outer CV joint typically produces a clicking noise during sharp turns, whereas a worn inner CV joint is more likely to cause vibrations throughout the car under acceleration.

Does the same drive shaft fit all engine options on the Saab 9 3?

No, drive shafts vary depending on whether your Saab 9 3 has a manual or automatic gearbox, as well as the engine fitted (such as the 1.8t, 2.0t or TiD). Always select your exact make, model and engine to find the right part.

Why does the ABS ring fail on the Saab 9 3?

The most common issue is corrosion developing underneath the ring, which causes it to expand and ultimately crack. This disrupts the signal to the sensor and illuminates the ABS warning light.

Do I need to replace the entire drive shaft if only the CV boot is split?

No, if you catch a damaged CV boot early and the joint has not started to make noises, replacing the boot and repacking it with fresh grease is usually sufficient.

Is it difficult to replace an outer CV joint on a Saab 9 3 myself?

It requires specific tools and mechanical experience, but it is a common DIY repair. The most critical step is ensuring the splines and retaining circlips are seated correctly.

How many kilometres does a drive shaft typically last on a Saab 9 3?

A drive shaft can last for the entire lifespan of the car provided the boots remain intact, though it is not uncommon to see wear after 150,000 to 200,000 kilometres, depending on driving style.