Saab 99

Welcome to your drivetrain specialist for the Saab 99. As Swedish driveline experts, we supply a carefully chosen range of parts to keep your classic Saab dependable on the road. Whether...

Products for Saab 99

3 products
1 - 3 of 3
Item no.:0555099
  • Position: Outer
  • Inner splines: 25
  • Splines wheel side: 25
  • Seal diameter: 56 mm
  • Outer splines: 25
Item no.:118014
  • Position: Front left
  • Splines wheel side: 30
  • Total length: 611 mm
  • Joint diameter: 90 mm
  • Diameter 1: 90 mm
Item no.:210304
  • Position: Front right
  • Splines wheel side: 30
  • Total length: 667 mm
  • Joint diameter: 90 mm
  • Diameter 1: 90 mm

Drivetrain for Saab 99

The Saab 99 is an iconic model representing an important era in Swedish automotive history. To preserve the driving pleasure and distinct character of this classic, a properly functioning drivetrain is absolutely essential. The drivetrain is responsible for transferring the engine's power to the road, and on a front-wheel-drive car like the Saab 99, this involves a complex interplay between gearbox, drive shafts, and joints. Over time these components wear out, especially on cars that have covered many kilometres or stood idle for extended periods. Investing in high-quality spare parts is not merely a matter of repair, but of preserving a piece of motoring history. At CVJoint24 you will find the specific components required to keep your Saab running smoothly and safely. We focus on precision and durability, which is particularly vital for older models where tight tolerances are essential to avoid secondary damage to other parts of the transmission.

How the drivetrain is engineered on the Saab 99

The drivetrain layout of the Saab 99 is unique and differs markedly from many modern vehicles. The engine is longitudinally mounted directly above the gearbox, creating a compact yet technically intriguing setup. Power is delivered from the gearbox via the inner CV joints, which in turn drive the drive shafts out to the wheels. At the road wheels sit the outer constant velocity joints, allowing the wheels to steer and absorb suspension movement simultaneously while transmitting power. This mechanical chain is subjected to severe stresses, especially under hard steering lock or heavy acceleration. Because the Saab 99 uses a distinct geometry for its wishbones and suspension, every drivetrain component must be precisely calibrated. An incorrect driveshaft length or a joint with the wrong spline count can quickly lead to severe problems. Understanding how these parts interact makes it easier to diagnose potential issues and resolve them before they cause a complete breakdown at the roadside.

Common faults and symptoms

There are several distinct signs that the drivetrain on your Saab 99 is beginning to fail. One of the most typical symptoms is a rhythmic clicking or knocking noise heard when turning sharply, such as while parking or navigating a tight junction. This usually indicates that an outer CV joint is worn out and requires replacement. If you instead experience vibrations throughout the car under acceleration, it may signal that the inner joints or the drive shaft itself is bent or out of balance. Another critical area is the CV boots; if a rubber boot splits, lubricating grease escapes whilst road dirt and moisture penetrate. This will ruin the joint in very short order. You should also listen for noises from centre bearings, which often produce a droning or whining sound that changes with road speed. Ignoring these warning signs can result in a snapped drive shaft, leaving the vehicle stranded with no drive.

Common replacement parts for the Saab 99

For the Saab 99, we have identified the key components that most frequently require attention to maintain overall reliability. Our selection is tailored to meet the demands of both full restorations and routine maintenance. Here are the most common parts our customers look for regarding this model:

  • Drive shaft: Complete shafts that replace worn or distorted original assemblies to eliminate drivetrain vibrations.
  • Outer CV joint: The most common wear item, frequently replaced when clicking noises develop on lock.
  • Centre bearing: Essential for stabilising the driveline and suppressing mechanical vibrations through the chassis.

By focusing on these core areas, we ensure that you as a Saab 99 owner can find precisely what you need without sifting through thousands of irrelevant listings. Every component is selected for exact fitment and its ability to withstand the demands of a classic drivetrain.

How to find the right part for your Saab 99

Proceed to the relevant section for your Saab 99:

On a vehicle with several possible drivetrain faults, it pays to start in the correct category straight away. By comparing the specific product groups for the Saab 99, it becomes simpler to distinguish between drive shaft, CV joint, or propeller shaft issues, leading you directly to the parts matching your symptoms and technical specifications.

If you are unsure whether a part fits your vehicle, simply select your car's make, model, and engine variant to view fully matching components.

Why buy from CVJoint24

When you purchase from CVJoint24, you choose a Swedish driveline specialist dedicated to vehicle power transmission. We are not a general car parts retailer selling everything from air fresheners to tyres; we specialise purely in drivetrains. This clear focus allows us to offer unmatched technical expertise and an extensive inventory for historic models like the Saab 99. We back our products with a fitment guarantee, giving you complete confidence with every order. We dispatch promptly from our warehouse in Helsingborg, Sweden, ensuring reliable delivery across the EU. Buying the correct part the first time saves time, money, and unnecessary hassle. With our technical expertise, high-grade products, and dedicated customer support, we are the natural choice for any Saab enthusiast wanting to keep their car in prime condition.

Frequently asked questions about Saab 99 drivetrain

How do I know if my Saab 99 needs a new drive shaft?

The most common symptoms are heavy vibrations under acceleration or a grinding noise from the drivetrain. If the vibrations stop when you release the throttle, it is often a sign of worn drive shaft joints.

Do all CV joints fit every model year of the Saab 99?

No, spline counts and dimensions can vary depending on the model year and engine option. Always select your vehicle make, model and engine to ensure the correct fit.

What is the difference between the inner and outer CV joint on a Saab 99?

The outer CV joint is located by the wheel and accommodates steering angles, while the inner joint sits by the gearbox and primarily manages suspension movement. Clicking noises when cornering point to the outer joint, whereas vibrations usually stem from the inner joint.

Can I replace just the CV boot if the joint is still intact?

Yes, if you detect a split CV boot early before dirt has entered and damaged the joint, it is often enough to replace the boot and pack it with fresh grease.

Why does my Saab 99 vibrate under acceleration?

This is often caused by an imbalanced drive shaft or wear in the inner CV joints. It can also stem from a worn centre bearing that no longer stabilises the shaft correctly.

How does the fitment guarantee work at CVJoint24?

Our fitment guarantee means that when you select your vehicle's make, model and engine variant and order the recommended part, we guarantee it will fit your car. If it does not, we will help you find the correct part without any hassle.