Seat Altea

Spare parts and drivetrain components for the Seat Altea.

Products for Seat Altea

72 products
49 - 72 of 72
Item no.:0660175
  • Total length: 116 mm
Item no.:0677734
Item no.:319633
  • Position: Front
  • Splines wheel side: 36
  • Total length: 754 mm
  • Joint diameter: 98 mm
  • Joint diameter, gearbox side: 119 mm
Item no.:310657
  • Position: Front
  • Splines wheel side: 36
  • Total length: 544 mm
  • Joint diameter: 90 mm
  • Joint diameter, gearbox side: 100 mm
Item no.:0942079
Item no.:346985
  • Position: Inner
  • Inner splines: 22
  • Seal diameter: 31 mm
  • Total length: 157 mm
  • Joint diameter: 75 mm
Item no.:1149460
  • Splines wheel side: 36
  • Total length: 538 mm
  • Joint diameter: 94 mm
  • Joint diameter, gearbox side: 100 mm
  • Flange diameter: 100 mm
Item no.:1155855
  • Position: Front left
  • Splines wheel side: 36
  • Joint diameter: 90 mm
  • Joint diameter, gearbox side: 100 mm
  • Diameter 2: 100 mm
Item no.:0496833
  • Position: Inner
  • Inner splines: 28
  • Total length: 32 mm
Item no.:119171
  • Position: Front left
  • Splines gearbox side: 94
  • Splines wheel side: 36
  • Total length: 558 mm
  • Joint diameter: 81 mm
Item no.:2153687
  • Position: Front right
  • Splines wheel side: 36
  • Total length: 779 mm
  • Joint diameter: 81 mm
  • Joint diameter, gearbox side: 94 mm
Item no.:3584325
  • Position: Outer
  • Inner splines: 30
  • Seal diameter: 59 mm
  • Outer splines: 36
  • Thread size: M16X1,5
Item no.:615531
  • Position: Rear left
  • Splines gearbox side: 36
  • Splines wheel side: 36
  • Total length: 594 mm
  • Diameter 2: 100 mm
Item no.:511076
  • Position: Rear right
  • Splines wheel side: 36
  • Total length: 631 mm
  • Diameter 2: 100 mm
  • Flange diameter: 100 mm
Item no.:620639
  • Position: Rear
  • Total length: 2,170 mm
  • Number of joints: 1
  • Outer diameter 1: 16 mm
  • Bolt circle diameter 1: 96 mm
Item no.:219686
  • Position: Front
  • Splines wheel side: 36
  • Total length: 600 mm
  • Joint diameter: 98 mm
  • Joint diameter, gearbox side: 108 mm
Item no.:1184163
  • Position: Front left
  • Splines wheel side: 36
  • Total length: 543 mm
  • Joint diameter: 90 mm
  • Joint diameter, gearbox side: 100 mm
Item no.:2132359
  • Position: Front right
  • Splines wheel side: 36
  • Total length: 785 mm
  • Joint diameter, gearbox side: 108 mm
  • Flange diameter: 108 mm
Item no.:0474493
  • Position: Inner
  • Inner splines: 33
  • Splines gearbox side: 36
  • Seal diameter: 59,5 mm
  • Total length: 79 mm
Item no.:346158
  • Position: Front, Inner
  • Inner splines: 33
  • Total length: 31,8 mm
Item no.:0932978
Item no.:346607
  • Position: Inner
  • Inner splines: 28
  • Seal diameter: 108 mm
  • Total length: 32 mm
  • Joint diameter: 108 mm
Item no.:0459660
  • Position: Inner
  • Inner splines: 33
  • Seal diameter: 59 mm
  • Total length: 93 mm
  • Joint diameter: 93,7 mm
Showing 49–72 of 72 products

Seat Altea drivetrain

The drivetrain in a Seat Altea is a sophisticated assembly responsible for transferring the engine's power to the wheels with minimal loss and maximum precision. As a versatile MPV, the Altea demands components capable of handling everyday city driving as well as long motorway journeys. At CVJoint24, we understand the importance of every part in this system working in complete harmony. With carefully selected products across our range, we cover everything from individual CV joints to complete drive shafts. Maintaining the drivetrain is not merely a matter of performance, but crucially one of safety. A worn driveshaft or defective joint can, in the worst case, lead to a total breakdown by the roadside. By selecting the right spare parts tailored specifically for the Seat Altea, you ensure the car's handling is preserved and extend the operating life of the other driveline components.

How the drivetrain is structured on the Seat Altea

The Seat Altea is built on a technical platform with a transverse engine, which dictates how the drivetrain is configured. Power travels from the gearbox via the drive shafts out to the front wheels. For models equipped with four-wheel drive, such as the Altea Freetrack, a more complex setup is added featuring a bevel gear (angle transfer box), propeller shaft, and a rear differential. The drive shafts feature two types of joints: an inner joint positioned against the gearbox and an outer joint located at the wheel hub. The outer joint is engineered to articulate at wide angles during steering, whilst the inner joint primarily accommodates the axial travel that occurs as the suspension works. This configuration requires high-grade materials to withstand the torque and mechanical stresses generated during driving. Understanding this layout is essential when diagnosing issues or choosing the correct replacement car parts for your Seat Altea.

Common faults and symptoms

There are several clear signs that the drivetrain in your Seat Altea is becoming worn. One of the most typical symptoms is a clicking or knocking noise heard at full steering lock under acceleration; this usually indicates that an outer CV joint on your Seat Altea is failing. If you instead experience vibrations through the car body under acceleration, particularly at higher speeds, it may point to a worn inner CV joint or an unbalanced drive shaft. For owners of four-wheel-drive models, vibrations felt through the floor can signal an issue with the propeller shaft or its centre bearing. It is also vital to watch for grease leaks around the CV boots. If a boot splits, road dirt enters and the grease is lost, causing the joint to wear out in very short order. Ignoring these symptoms can quickly result in far more costly repairs later on.

Common parts to replace on the Seat Altea

Depending on your driving style and mileage, certain drivetrain components endure higher wear than others. We stock a comprehensive selection of the most sought-after components for your model. Here are the most relevant categories for the Seat Altea:

  • Drive shafts for Seat Altea – We offer multiple versions covering all engine variants and gearboxes.
  • Outer CV joints for Seat Altea – A vital part for steering and power transmission, available in specific models.
  • Inner CV joints for Seat Altea – Crucial for eliminating vibrations, with several options in stock.
  • Propeller shafts for Seat Altea – For 4WD versions such as the Freetrack, we supply 8 premium options.

By replacing worn car parts promptly, you prevent secondary damage to the gearbox and wheel bearings, saving both money and hassle in the long run.

How to find the right part for your Seat Altea

Proceed to the relevant section for your Seat Altea:

On a vehicle with several possible driveline faults, it is best to start in the correct category straight away. By comparing the exact component sections for the Seat Altea, it is easier to distinguish between issues in a driveshaft, constant velocity joint, or prop shaft, and move on to the page that best matches your symptoms and fitment.

Navigating different technical specifications can seem daunting, but at CVJoint24 we make it straightforward. The most reliable way to find the exact part for your Seat Altea is to filter by your car's make, model, and engine variant. Selecting your vehicle details will immediately display the products compatible with your car's specific configuration. Please note that specifications can vary between manual and automatic (DSG) gearboxes, as well as across different engine displacements. We also recommend checking the spline count on your original component if you are uncertain, as this is a crucial dimension for ensuring a precise fit into the wheel hub or gearbox. Our aim is to give you complete confidence in your purchase, with our database continuously updated to guarantee accurate recommendations.

Why shop at CVJoint24

CVJoint24 is more than just an online shop; we are a Swedish driveline specialist offering deep technical expertise, shipping directly from our central warehouse in Helsingborg, Sweden across the EU. When buying replacement parts for your Seat Altea from us, you access a range curated specifically for quality and long-term durability. We understand the demanding requirements placed on vehicle components by harsh European roads and changing seasons. Our strength lies in our specialised category depth and our accurate model fitment, helping you minimise the risk of ordering the incorrect part. By focusing exclusively on the vehicle drivetrain, we provide technical know-how that general car part retailers often lack. With rapid dispatch across Europe and knowledgeable customer support, CVJoint24 is the obvious choice for discerning drivers who want their Seat Altea to perform reliably on the road.

Frequently Asked Questions about Drivetrain Parts for Seat Altea - Spare Parts with a Perfect Fit

How do I know if my Seat Altea needs a new outer CV joint?

The most common symptom is a clicking or knocking noise from the front suspension when making sharp turns while accelerating. If the noise disappears when driving straight ahead, it is almost certainly the outer CV joint that is worn.

Can I replace just the CV boot if the joint is still working?

Yes, if you discover a damaged CV boot early and the joint has not started clicking or vibrating, you can clean the joint, apply fresh grease, and fit a new boot to extend its service life.

Why does my Seat Altea vibrate during acceleration?

Vibrations under acceleration are often caused by wear in the inner CV joint or an imbalance in the drive shaft itself. They can also stem from issues with the propeller shaft if you drive a four-wheel-drive Altea Freetrack.

Does the same drive shaft fit both manual and DSG gearboxes on the Altea?

No, drive shafts usually differ between manual and automatic (DSG) transmissions in terms of length and inner flange fitment. Always select your car's make, model, and engine variant to ensure you receive the correct version.

How many drive shafts does a Seat Altea have?

A front-wheel-drive Seat Altea has two front drive shafts. Four-wheel-drive models (Freetrack) also feature two rear driveshafts as well as a propeller shaft running along the centre of the vehicle.

Is it difficult to replace a drive shaft on a Seat Altea yourself?

It requires appropriate tools and some mechanical experience, as you need to detach suspension components and sometimes drain gearbox oil. We recommend having access to a workshop manual before starting.

What happens if a drive shaft snaps while driving?

If a drive shaft breaks, drive to that wheel is lost entirely. On a front-wheel-drive car, this leaves you stranded immediately, as all engine power is dissipated through the open differential.