Seat Exeo ST

Welcome to your drivetrain specialist for the Seat Exeo ST. We offer a carefully selected range of high-quality components that ensure your car retains its performance and reliability....

Products for Seat Exeo ST

21 products
1 - 21 of 21
Item no.:2159646
  • Position: Front right
  • Splines wheel side: 38
  • Total length: 620 mm
  • Joint diameter: 98 mm
  • ABS teeth: 45
Item no.:0581962
  • Position: Outer
  • Inner splines: 27
  • Seal diameter: 59 mm
  • Outer splines: 38
  • ABS teeth: 45
Item no.:1198357
  • Position: Front left
  • Splines wheel side: 38
  • Total length: 595 mm
  • Joint diameter: 98 mm
  • ABS teeth: 45
Item no.:2111865
  • Splines wheel side: 38
  • Total length: 619 mm
  • Joint diameter, gearbox side: 104 mm
  • ABS teeth: 45
Item no.:1117597
  • Position: Front left
  • Splines wheel side: 38
  • Total length: 593 mm
  • Joint diameter: 88 mm
  • ABS teeth: 45
Item no.:347027
  • Position: Inner
  • Inner splines: 22
  • Seal diameter: 31 mm
  • Total length: 157 mm
  • Joint diameter: 75 mm
Item no.:0695527
Item no.:118353
  • Position: Front left
  • Splines wheel side: 38
  • Total length: 590 mm
  • Joint diameter: 98 mm
  • ABS teeth: 45
Item no.:2134849
  • Position: Front right
  • Splines wheel side: 38
  • Total length: 613 mm
  • Joint diameter, gearbox side: 100 mm
  • ABS teeth: 45
Item no.:348700
  • Position: Front, Inner
  • Inner splines: 34
  • Total length: 82 mm
Item no.:0609214
  • Total length: 86 mm
Item no.:0606974
  • Total length: 125 mm
Item no.:340336
  • Position: Front, Inner
  • Inner splines: 34
  • Seal diameter: 100 mm
  • Joint diameter: 85 mm
Item no.:0982302
  • Inner diameter: 24 mm
  • Outer diameter: 40 mm
Item no.:1104852
  • Splines wheel side: 38
  • Total length: 595 mm
  • Joint diameter, gearbox side: 123 mm
  • Seal ring diameter: 59,5 mm
  • Thread size: M16x1.5
Item no.:2143988
  • Splines wheel side: 38
  • Total length: 620 mm
  • Joint diameter, gearbox side: 123 mm
Item no.:7311939
  • Position: Inner
  • Inner splines: 34
  • Seal diameter: 123 mm
  • Total length: 84 mm
  • Joint diameter: 104 mm
Item no.:0502373
  • Position: Outer
  • Inner splines: 33
  • Seal diameter: 59 mm
  • Outer splines: 38
  • ABS teeth: 45
Item no.:3576513
  • Position: Outer
  • Inner splines: 27
  • Seal diameter: 59 mm
  • Outer splines: 38
  • ABS teeth: 45
Item no.:315515
  • Position: Front
  • Splines wheel side: 38
  • Total length: 521 mm
  • Joint diameter: 98 mm
  • ABS teeth: 45

Drivetrain for Seat Exeo ST

The Seat Exeo ST is a car that combines practicality with driving pleasure, and maintaining these qualities requires a drivetrain in absolute top condition. As a driveline specialist, we offer an extensive range of parts specifically tailored for this spacious estate model. With a total of 13 carefully selected items, we cover most needs that may arise during repairs or preventive maintenance. Understanding the importance of a properly functioning drivetrain is essential for every car owner, as this is the part of the vehicle that converts engine power into controlled motion on the road. By choosing the right components from the start, you extend the car's service life and ensure a safe driving experience for both driver and passengers, whether for urban driving or long holidays with a fully laden car. We focus on supplying parts that meet extremely high standards of fit and durability, which is crucial for a technically sophisticated model like the Seat Exeo ST. Our aim is for you to feel confident that every part you purchase from us helps maintain your car's overall reliability and performance for many years to come.

How the drivetrain is designed on the Seat Exeo ST

The drivetrain on a Seat Exeo ST is a sophisticated assembly built on proven technology to deliver power smoothly and efficiently to the front wheels. The system consists of several interacting components, with the gearbox transferring torque via the drive shafts to the wheel hubs. Each drive shaft is fitted with two joints: an inner one located closest to the gearbox and an outer one positioned at the wheel. These joints are small mechanical marvels that allow the wheels to move up and down with the suspension and steer at sharp angles, all while transferring power smoothly without interruption or jerking. To protect these sensitive precision components, which are often manufactured from high-strength steel to extremely tight tolerances, CV boots packed with high-performance grease are used. If a boot tears, the joint is instantly exposed to dirt, road grit and moisture, quickly causing accelerated wear and failure. Understanding this complex interaction is key to identifying when it is time to service or replace components on your Seat Exeo ST, and this is where our specialist expertise comes in to guide you.

Common faults and symptoms

There are several clear signs that the drivetrain on your Seat Exeo ST is becoming worn and needs inspecting by a professional garage or a competent DIY mechanic. One of the most common symptoms is a rhythmic clicking or knocking noise clearly heard when turning on full lock at low speeds, such as during parking. This sound almost always points to a worn outer CV joint where dirt has penetrated the bearing tracks. If you instead experience unpleasant vibrations through the steering wheel or car body under acceleration, it may indicate that an inner constant velocity joint or the drive shaft itself suffers from imbalance or internal mechanical damage. It is also vital to inspect the condition of the boots regularly; if you notice dark grease splatters on the inside of the wheel rim or in the wheel arch, it is a sure sign that a CV boot has split. Ignoring these early warning signs can lead to far more extensive and expensive damage to other driveline parts, and in the worst case, leave you stranded at the roadside following a total failure.

Common parts to replace on the Seat Exeo ST

For the Seat Exeo ST, we have identified the most critical components that frequently require attention to preserve the car's driving characteristics. Our range includes several different drive shafts, covering most engine options and gearbox combinations, regardless of whether your car is equipped with a manual or automatic transmission. In addition, we offer multiple versions of outer CV joints and inner CV joints, as well as specific CV joint boots that are essential for protecting the assembly from road debris. Replacing an entire driveshaft can often prove a more time-efficient and cost-effective solution in the long run than trying to rebuild individual worn joints, particularly if the vehicle has covered many kilometres. In many specific cases, however, simply replacing the faulty joint will fully restore function. Having access to the right spare parts allows you to quickly return your car's performance to top condition. We ensure you always receive parts precisely engineered to withstand the rigorous demands of daily European road conditions, including extreme temperature fluctuations and road salt.

Finding the right part for the Seat Exeo ST

Proceed to the relevant section for your Seat Exeo ST:

On a vehicle with several possible driveline issues, it pays to start in the correct category straight away. By comparing the exact component sections for the Seat Exeo ST, it becomes easier to distinguish between faults in a drive shaft, CV joint or propeller shaft and to continue to the page that best matches your symptoms and fitment.

Finding the exact replacement car parts for a specific model like the Seat Exeo ST can sometimes feel daunting, but we have put extensive effort into simplifying the process for you. By selecting your car's make, model and engine, you can filter for parts guaranteed to fit your vehicle in just a few seconds. This completely eliminates the risk of ordering the wrong component, saving you both valuable time and return shipping costs. Our comprehensive database is meticulously updated with the latest technical specifications to ensure that every item in our catalogue satisfies the rigorous demands of modern drivetrains. To make site navigation straightforward, we have organised our range into clear, logical subcategories. In this section, you can quickly find the right route forward for your car:

  • Drive shafts for Seat Exeo ST
  • Outer CV joints for Seat Exeo ST
  • Inner CV joints for Seat Exeo ST
  • CV boots for Seat Exeo ST
Clicking through to the right subcategory gives you a complete, detailed overview of all available options, technical specifications and prices, making your decision straightforward and secure.

Why shop with CVJoint24

When you choose to buy your spare parts from CVJoint24, you are choosing a Swedish driveline specialist with exceptional, in-depth knowledge of vehicle drivetrains and power transmission. We understand how important it is for you as a car owner to receive the right part without delay, which is why we offer an accurate fitment guarantee when you select your vehicle by make, model and engine. Our uncompromising focus on quality means we only stock products from manufacturers we trust completely, giving you extra peace of mind with every purchase. With prompt and reliable dispatch from our central warehouse, we minimise the time your car has to spend off the road in the garage or workshop. We strive to always keep the right part on the shelf for your Seat Exeo ST, whether you need a complete drive shaft for a major repair or a small but crucial drive shaft boot for preventive maintenance. Our collective expertise and genuine dedication to customer satisfaction make us your dependable partner for all your drivetrain and driveline requirements.

Frequently Asked Questions about Drivetrain Parts for Seat Exeo ST

How do I know if my Seat Exeo ST needs a new drive shaft?

The most common signs are vibrations under acceleration or unusual noises from the drivetrain. If vibrations persist despite correctly balanced wheels, a worn drive shaft is often the culprit.

What is the difference between the inner and outer CV joint on a Seat Exeo ST?

The outer CV joint is located by the wheel and accommodates steering; when worn, it typically clicks when turning. The inner CV joint sits next to the gearbox and usually causes vibrations under acceleration when it fails.

Can I replace just the CV boot if it is split?

Yes, if you catch the damage early before dirt and moisture have entered the joint, replacing the CV boot and repacking it with fresh grease is often sufficient.

Why does my Seat Exeo ST vibrate under acceleration?

Vibrations under acceleration are frequently caused by wear in the inner CV joints or an imbalance in the drive shaft itself, requiring inspection and potentially replacement.

How do I find the correct parts for my vehicle?

Select your make, model and engine variant in our search filter, and we will automatically display the 13 parts specifically tailored to your Seat Exeo ST.

Is it difficult to replace a CV joint on a Seat Exeo ST?

It requires specific tools and mechanical experience. For a competent DIY mechanic it is entirely feasible, but it is essential to observe the correct torque settings and safety procedures.