Seat Leon ST

Spare parts and drivetrain components for the Seat Leon ST.

Products for Seat Leon ST

82 products
49 - 72 of 82
Item no.:0520220
  • Position: Outer
  • Inner splines: 30
  • Splines wheel side: 36
  • Seal diameter: 60 mm
  • Outer diameter: 90 mm
Item no.:2118385
  • Position: Front right
  • Splines wheel side: 36
  • Total length: 821 mm
  • Joint diameter, gearbox side: 100 mm
  • Flange diameter: 100 mm
Item no.:0447676
  • Position: Inner
  • Inner splines: 33
  • Splines gearbox side: 36
  • Seal diameter: 59,5 mm
  • Total length: 79 mm
Item no.:626044
  • Position: Rear
  • Total length: 2,218 mm
  • Number of joints: 1
  • Outer diameter 1: 16 mm
  • Bolt circle diameter 1: 105 mm
Item no.:311736
  • Position: Front
  • Splines wheel side: 36
  • Total length: 820 mm
  • Joint diameter, gearbox side: 100 mm
  • Flange diameter: 100 mm
Item no.:213214
  • Position: Front right
  • Diameter 1: 94 mm
  • Diameter 2: 110 mm
Item no.:115714
  • Position: Front left
  • Splines wheel side: 36
  • Total length: 485 mm
  • Joint diameter: 94 mm
  • Joint diameter, gearbox side: 110 mm
Item no.:2122252
  • Position: Front right
  • Splines wheel side: 36
  • Total length: 785 mm
  • Joint diameter, gearbox side: 108 mm
  • Flange diameter: 108 mm
Item no.:314103
  • Position: Front
  • Splines wheel side: 36
  • Total length: 511 mm
  • Flange diameter: 100 mm
Item no.:342744
  • Position: Front, Inner
  • Inner splines: 28
  • Splines gearbox side: 40
  • Seal diameter: 46,9 mm
  • Total length: 104 mm
Item no.:211919
  • Position: Front right
  • Splines gearbox side: 37
  • Splines wheel side: 36
  • Total length: 910 mm
  • Joint diameter: 98 mm
Item no.:1169471
  • Splines wheel side: 36
  • Total length: 505 mm
Item no.:0463162
  • Position: Front right, Inner
  • Inner splines: 34
  • Seal diameter: 40 mm
  • Outer splines: 37
Item no.:0580877
  • Position: Front, Outer
  • Inner splines: 33
  • Splines wheel side: 36
  • Outer diameter: 94 mm
Item no.:7311115
  • Position: Front right
  • Splines wheel side: 36
  • Total length: 754 mm
  • Joint diameter: 98 mm
  • Joint diameter, gearbox side: 119 mm
Item no.:347840
  • Position: Front, Inner
  • Inner splines: 28
  • Splines gearbox side: 28
  • Total length: 32 mm
Item no.:315465
  • Position: Front left
  • Splines wheel side: 36
  • Total length: 544 mm
  • Joint diameter: 90 mm
  • Joint diameter, gearbox side: 100 mm
Item no.:417205
  • Position: Rear left
  • Splines gearbox side: 40
  • Splines wheel side: 36
  • Total length: 611 mm
  • Diameter 1: 83 mm
Item no.:111103
  • Position: Front left
  • Splines gearbox side: 37
  • Splines wheel side: 36
  • Total length: 570 mm
Item no.:518615
  • Position: Rear right
  • Splines wheel side: 36
  • Inner splines: 33
  • Total length: 650 mm
  • Diameter 1: 83 mm
Item no.:216592
  • Position: Front right
  • Splines wheel side: 36
Item no.:1173481
  • Position: Front left
  • Splines wheel side: 36
  • Total length: 543 mm
  • Joint diameter: 90 mm
  • Joint diameter, gearbox side: 100 mm
Showing 49–72 of 82 products

Seat Leon ST drivetrain

The Seat Leon ST, or Sports Tourer, is a versatile estate that demands a reliable, robust drivetrain to maintain its sporty handling and high level of safety. The drivetrain is the central system that transfers engine power to the wheels, and for a car like the Leon ST, precision in these components is vital for both performance and fuel economy. At CVJoint24, we specialise in these exact components, offering a range spanning complete drive shafts to dedicated joint kits. With a broad selection in our catalogue for this model, we ensure you receive parts that match or exceed original specifications. Maintaining the drivetrain is not merely a matter of ride comfort, but of preventing costly consequential damage to the gearbox and suspension caused by prolonged wear.

How the drivetrain is engineered on the Seat Leon ST

The Seat Leon ST is built on the proven MQB platform, featuring an advanced, sophisticated power transmission layout. Depending on the engine option and whether it is front-wheel drive or four-wheel drive, the setup comprises a combination of drive shafts, inner and outer CV joints, and protective CV boots. The outer CV joint on the Seat Leon ST sits closest to the wheel and is engineered to allow both steering angle and large suspension travel without losing power. The inner constant velocity joint accommodates the angular changes relative to the gearbox during driving. This complex assembly requires components with exceptionally tight tolerances to minimise friction and heat build-up, especially under heavy loads such as when carrying full luggage or towing a trailer—common duties for the ST estate.

Common faults and symptoms

Several clear symptoms indicate that drivetrain components on your Seat Leon ST are worn and require inspection. One of the most typical signs is a rhythmic clicking or knocking noise clearly audible during sharp turns at low speed, which almost always points to a worn outer CV joint. If you experience vibrations through the steering wheel or chassis during acceleration instead, this can indicate play or wear in an inner CV joint. It is also vital to inspect the CV boots regularly; a split boot quickly lets in dirt and road salt while allowing crucial lubricating grease to escape. Early detection through visual checks can save substantial expense by preventing the need to replace the entire driveshaft later on.

Common replacement parts for the Seat Leon ST

Based on our extensive sales data and stock levels, certain components are replaced more frequently on the Seat Leon ST than others. We see particularly high demand for complete drive shafts, where we supply multiple variants to cater for every engine and gearbox combination. To help you navigate our range, we have divided our stock into clear categories matched to the vehicle's technical specifications. Here are the primary product groups to check during servicing or repair work:

  • Drive shafts for Seat Leon ST – The complete solution for a fast, reliable replacement of the entire assembly.
  • Outer CV joints for Seat Leon ST – The most common wear item behind knocking noises on full lock.
  • Inner CV joints for Seat Leon ST – The solution for curing vibrations under acceleration and load.

Selecting the right category allows you to find parts tailored to your car's exact configuration quickly, whether you run an entry-level petrol engine or a high-torque four-wheel-drive diesel.

Finding the right part for your Seat Leon ST

Browse directly to the relevant subcategory for your Seat Leon ST:

On a vehicle with several possible drivetrain issues, starting in the correct category is essential. By comparing the exact component sections for the Seat Leon ST, distinguishing between drive shaft, CV joint or propeller shaft faults becomes straightforward, taking you straight to the page that best matches your symptoms and fitment.

Identifying the exact component for your Seat Leon ST can be challenging, as multiple technical versions often exist for the same model year. Differences depend on whether the car features a manual gearbox or a DSG automatic transmission, as well as engine output and four-wheel-drive configuration. The most reliable way to find the correct car parts is to select your vehicle's make, model and engine in our store filter. This instantly presents products technically verified for your specific car. If you remain unsure whether a drive shaft fits your Seat Leon ST, we recommend checking the spline count on the shaft and the tooth count on the ABS ring, as these dimensions are crucial for trouble-free installation and long-term durability.

Why shop at CVJoint24

CVJoint24 is the international shop of a Swedish driveline specialist, dispatching orders across the EU from our central warehouse in Helsingborg, Sweden. We stand out from general car parts retailers thanks to our deep technical expertise and dedicated range. When choosing us, you receive spare parts selected for premium quality and exact fit. We understand how important it is that your Seat Leon ST runs smoothly and vibration-free on European roads, which is why we only supply parts we trust entirely. With specialist driveline knowledge and easy filtering by make, model and engine, we make ordering straightforward for DIY mechanics and professional workshops alike. Choose a specialist focused on your car's reliability for many thousands of trouble-free kilometres ahead.

Frequently Asked Questions about Drivetrain for Seat Leon ST

How do I know if my Seat Leon ST needs a new drive shaft?

The most common symptoms are heavy vibrations under acceleration or a persistent noise from beneath the car. If you notice a torn CV boot and grease splattered inside the wheel arch, there is a high risk that the drive shaft or its joints have suffered damage.

Can I replace just the CV joint instead of the entire drive shaft on my Seat?

Yes, on the Seat Leon ST it is often possible to replace only the outer or inner CV joint if the shaft bar itself is undamaged. This is frequently a more economical option if the fault is identified early.

Do all drive shafts fit every Seat Leon ST model?

No, there are significant differences depending on the engine, gearbox (manual/DSG), and whether the car is front-wheel drive or four-wheel drive. Always select your vehicle's make, model, and engine variant to ensure the correct fitment.

What causes vibrations in my Seat Leon ST under acceleration?

Vibrations under acceleration are often caused by wear inside the inner CV joint. When play develops within the joint, it can no longer keep the shaft centred under load, leading to imbalance and vibration.

How often should I inspect the CV boots on my Seat?

We recommend inspecting the CV boots at every service or seasonal tyre change. A small tear can quickly let dirt in and ruin the CV joint, so replacing a damaged boot early will save you money.

What is the difference between inner and outer CV joints?

Yes, the outer CV joint is located at the wheel and accommodates steering angles, whereas the inner joint sits at the gearbox and primarily manages plunge movements and smaller angles as the suspension articulates.