Skoda Enyaq IV

Welcome to your drivetrain specialist for the Skoda Enyaq IV. As Swedish driveline specialists, we supply a dedicated range of components engineered specifically for the electric...

Choose version

Choose a version to refine the results and get closer to the right product.

Products for Skoda Enyaq IV

45 products
25 - 45 of 45
Item no.:345403
  • Position: Front, Inner
  • Inner splines: 32
  • Seal diameter: 39,9 mm
  • Total length: 163,5 mm
  • Outer splines: 33
Item no.:0555949
  • Position: Outer
  • Inner splines: 28
  • Outer splines: 38
Item no.:613452
  • Position: Rear left
  • Splines gearbox side: 42
  • Splines wheel side: 38
  • Total length: 638 mm
Item no.:612913
  • Position: Rear right
  • Splines gearbox side: 42
  • Splines wheel side: 38
  • Total length: 852 mm
Item no.:418101
  • Position: Rear left
  • Splines gearbox side: 37
  • Splines wheel side: 38
  • Total length: 634 mm
Item no.:512676
  • Position: Rear right
  • Splines gearbox side: 37
  • Splines wheel side: 38
  • Total length: 859 mm
Item no.:116392
  • Position: Front left
  • Splines gearbox side: 33
  • Splines wheel side: 38
  • Total length: 663 mm
Item no.:0512006
  • Position: Outer
  • Inner splines: 28
  • Seal diameter: 59,5 mm
  • Outer splines: 38
  • Total length: 115 mm
Item no.:612116
  • Position: Rear left
  • Splines gearbox side: 42
  • Splines wheel side: 38
  • Total length: 638 mm
Item no.:618174
  • Position: Rear right
  • Splines gearbox side: 42
  • Splines wheel side: 38
  • Total length: 852 mm
Item no.:418092
  • Position: Rear left
  • Splines gearbox side: 37
  • Splines wheel side: 38
  • Total length: 634 mm
Item no.:511021
  • Position: Rear right
  • Splines gearbox side: 37
  • Splines wheel side: 38
  • Total length: 859 mm
Item no.:112522
  • Position: Front left
  • Splines gearbox side: 33
  • Splines wheel side: 38
  • Total length: 663 mm
Item no.:0599841
  • Position: Outer
  • Inner splines: 28
  • Seal diameter: 59,5 mm
  • Outer splines: 38
  • Total length: 115 mm
Item no.:612601
  • Position: Rear left
  • Splines gearbox side: 42
  • Splines wheel side: 38
  • Total length: 638 mm
Item no.:617596
  • Position: Rear right
  • Splines gearbox side: 42
  • Splines wheel side: 38
  • Total length: 852 mm
Item no.:410485
  • Position: Rear left
  • Splines gearbox side: 37
  • Splines wheel side: 38
  • Total length: 634 mm
Item no.:514460
  • Position: Rear right
  • Splines gearbox side: 37
  • Splines wheel side: 38
  • Total length: 859 mm
Item no.:114361
  • Position: Front left
  • Splines gearbox side: 33
  • Splines wheel side: 38
  • Total length: 663 mm
Item no.:0518395
  • Position: Outer
  • Inner splines: 28
  • Seal diameter: 59,5 mm
  • Outer splines: 38
  • Total length: 115 mm
Item no.:116965
  • Position: Front left
  • Splines gearbox side: 33
  • Splines wheel side: 38
  • Total length: 663 mm
Showing 25–45 of 45 products

Drivetrain for Skoda Enyaq IV

The Skoda Enyaq IV represents a major step into the electric era for the Czech marque. As a pure electric vehicle built on the modern MEB platform, it places entirely new demands on its drivetrain compared to traditional internal combustion cars. The instant delivery of power from electric motors means components face extremely heavy loads right from a standstill, requiring materials of the highest calibre. Servicing and, when needed, replacing worn components is vital to maintain the quiet, smooth driving experience that defines this model. Here at CVJoint24, you will find the specific car parts needed to keep your Enyaq performing at its best for years to come. We understand the technical nuances of electric power delivery and supply only products proven to withstand the tough stresses of a modern electric SUV. Choosing the right components not only extends the car's working life, but also ensures that all onboard safety systems operate precisely as the manufacturer intended.

How the drivetrain is engineered on the Skoda Enyaq IV

The layout of the drivetrain in a Skoda Enyaq IV differs substantially from combustion-engined vehicles. On rear-wheel-drive versions, the electric motor is mounted directly to the rear axle, delivering a compact and efficient power transfer with minimal energy losses. Four-wheel-drive models feature an additional motor on the front axle, providing an intelligent torque distribution system. This setup demands sturdy drive shafts capable of managing instant torque without compromising cabin refinement or noise levels. Because there is no traditional propeller shaft in these configurations, attention focuses entirely on the transverse shafts that deliver power straight to the road wheels. Every component along this line is optimised to minimise friction, which is essential for maximising electric driving range. As a specialist in Skoda, we ensure the spare parts we supply match these rigorous standards for precision and durability. Furthermore, the electric architecture makes the slightest vibration noticeable, making the quality of CV joints and shafts more critical than ever.

Common faults and symptoms

Although electric vehicles generally have fewer moving parts than petrol and diesel cars, the drivetrain remains a mechanical assembly exposed to natural wear and environmental stress. One of the most frequent warning signs is vibration during hard acceleration, which can often be traced back to play developing in the inner CV joints under high torque. Another common symptom is a clicking or knocking sound on full steering lock, typically pointing to an outer CV joint that is beginning to fail. Inspecting the CV boots on a regular basis is equally vital. If a boot tears, essential lubricating grease escapes and road dirt penetrates the joint mechanism, rapidly scoring and destroying the precision bearing surfaces. Because the Enyaq IV is a heavy vehicle owing to its high-voltage battery pack, the suspension and driveshafts endure extra strain on rough roads or during rapid acceleration away from traffic lights. Overlooking these early signs can cause extensive damage and substantially more expensive repairs later on.

Common parts to replace on the Skoda Enyaq IV

When servicing or repairing the power transmission, complete shafts and joints are the most frequently replaced items. The single most sought-after item in our catalogue for this model is undoubtedly the Drive shafts for Skoda Enyaq IV. We see demand for replacement shafts rising as these vehicles cover higher mileages and endure demanding European winter conditions. Alongside the shafts themselves, mounting hardware, circlips, and protective boots are essential items that should be inspected during every service. Installing a complete drive shaft is often far more time-efficient and cost-effective than attempting to rebuild individual worn joints, especially given the exact tolerances required on modern electric vehicles. Our parts are engineered to handle the specific torque curves generated by electric motors, setting them apart from generic alternatives that may fall short. Relying on quality-checked spare parts from a dedicated specialist ensures your vehicle retains its original handling and dependable roadworthiness.

Finding the right part for your Skoda Enyaq IV

Navigate directly to the relevant sub-category for your Skoda Enyaq IV:

When troubleshooting drivetrain issues, starting in the precise category saves time and effort. Comparing the exact component sections for the Skoda Enyaq IV makes it straightforward to distinguish between faults in a drive shaft, CV joint, or prop shaft, directing you to the parts that match your vehicle's symptoms and fitment.

Using our catalogue reduces the risk of ordering incorrect parts, giving you peace of mind that the right components will arrive directly at your door. If you are uncertain about any technical specification or vehicle dimension, our technical support team is always on hand to assist through the maze of part numbers and data. We are here to help you complete your repair smoothly with parts that fit first time.

Why buy from CVJoint24?

CVJoint24 is your Swedish driveline and power transmission specialist, with central warehousing in Helsingborg, Sweden, serving customers across the European Union. By focusing exclusively on this niche, we provide a level of expertise that general motor factors simply cannot match. When you order from us, you receive high-grade spare parts backed by our dependable fitment guarantee. We understand that workshop delays cost time and money, so we work to dispatch orders swiftly to get your car back on the road without delay. Our dedication to accuracy guides our entire operation, from our clear search filters to careful warehouse handling. We combine premium product standards with competitive pricing, making us the trusted choice for independent garages and DIY mechanics looking after their Skoda. Built on longevity and reliable engineering, we are your long-term partner for dependable drivetrain performance.

Frequently Asked Questions about Drivetrain Parts for Skoda Enyaq iV

How do I know if a drive shaft on my Skoda Enyaq iV is failing?

Common symptoms include vibrations under acceleration, clicking noises when making sharp turns, or grease leaking visibly from a damaged CV boot beneath the car.

Are drive shafts for electric vehicles different from petrol cars?

Yes, they are engineered to handle the high and instant torque delivered by an electric motor, placing significantly higher demands on materials and design.

How do I ensure I select the right drivetrain parts for my car?

Filtering by your car's make, model and engine variant on our website is the most reliable way to find the exact components for your specific Enyaq.

What does the fitment guarantee at CVJoint24 mean?

It means we guarantee the part will fit your vehicle when selected via our vehicle filter, giving you a secure, hassle-free shopping experience without return complications.

How quickly are spare parts for my Skoda delivered?

We dispatch all in-stock items quickly from our central warehouse so you can minimise vehicle downtime and get back on the road without delay.

Do I need to replace both drive shafts at the same time on my Enyaq?

It is not strictly necessary, but if one shaft has worn out through mileage, the opposing driveshaft on the same axle has usually experienced identical wear and may soon fail as well.