Skoda Felicia 1.6 LX

Welcome to your drivetrain specialist for the Skoda Felicia 1.6 LX. Here you will find a carefully selected range of premium components ensuring your vehicle's power transmission...

Products for Skoda Felicia 1.6 LX

8 products
1 - 8 of 8
Item no.:1128216
  • Position: Front left
  • Total length: 600 mm
  • Splines gearbox side: 22
  • Splines wheel side: 22
Item no.:2121801
  • Position: Front right
  • Total length: 862 mm
  • Splines gearbox side: 22
  • Splines wheel side: 22
Item no.:0547065
  • Position: Outer
  • Seal diameter: 45 mm
  • Inner splines: 22
  • Outer splines: 22
  • Joint diameter: 82 mm
Item no.:0635279
  • Position: Front
  • Diameter: 76 mm
  • Outer diameter: 19 mm
Item no.:0632796
  • Position: Front
  • Inner diameter: 21 mm
  • Total length: 83 mm
Item no.:2137226
  • Total length: 861 mm
  • Splines gearbox side: 22
  • Splines wheel side: 22
Item no.:117348
  • Position: Front left
  • Total length: 600 mm
  • Splines gearbox side: 22
  • Splines wheel side: 22

Drivetrain for Skoda Felicia 1.6 LX

The Skoda Felicia 1.6 LX is a classic model that requires proper maintenance to preserve its reliability and driving pleasure. The drivetrain is the heart of your vehicle's mobility, and on this page we have gathered everything you need to keep your Skoda in top condition. As a Swedish driveline specialist, we understand the specific demands of this engine variant. The 1.6-litre engine requires drive shafts and joints capable of handling torque without causing vibrations or abnormal noises while driving. By choosing the right components, you significantly extend the car's service life and avoid unnecessary breakdowns.

We offer a comprehensive range covering everything from the smallest circlips to complete shafts. Maintaining the drivetrain is not just about repairing what is already broken, but also about preventing future failures by replacing worn boots in good time. Here you will find parts adapted to the demands that European roads place on an older car model. Our focus is on delivering parts that match or exceed original equipment quality, which is crucial for a car like the Skoda Felicia 1.6 LX.

How the drivetrain is designed on the Skoda Felicia 1.6 LX

The layout of the drivetrain on a Skoda Felicia 1.6 LX is a proven front-wheel-drive design. Power from the engine travels via the gearbox out to the two drive shafts driving the front wheels. Each drive shaft is fitted with two joints: an inner joint mounted at the gearbox and an outer joint at the wheel hub. The outer joint is a constant velocity joint (CV joint) that allows the wheel to steer and articulate with the suspension whilst transferring power smoothly. This is a critical point for the car's handling.

To ensure these joints operate smoothly and durably, they are packed with specialised grease and shielded by rubber CV boots. On the Skoda Felicia 1.6 LX, it is essential that these boots remain intact and sealed, as grit, road salt and water can quickly destroy the precision-machined surfaces inside the joint. In addition, an ABS ring is often mounted on the outer CV joint, delivering vital signals to the car's braking system. The entire system is integrated to deliver a stable, safe drive, making the choice of the correct spare parts critical for overall roadholding and safety.

Common faults and symptoms

There are several clear signs that the drivetrain on your Skoda Felicia 1.6 LX is wearing out or damaged. The most typical symptom is a rhythmic clicking or knocking sound from the front end when cornering on full lock under acceleration. This usually indicates that an outer CV joint is failing due to wear or loss of grease. If you experience vibrations through the vehicle body during acceleration instead, a worn inner joint or excessive play is often the cause.

Another frequent issue is a split or loose boot. Grease splattered across the inside of the wheel rim or suspension components is an urgent sign that the drive shaft boot must be replaced before the joint suffers permanent damage. Furthermore, a cracked or corroded ABS ring can trigger the ABS warning light on the instrument cluster or cause abnormal brake pedal pulsing at low speeds. By staying alert to these symptoms and acting promptly, you can address faults before they lead to expensive repairs or leave you stranded at the roadside.

Common parts to replace on the Skoda Felicia 1.6 LX

To assist with your repair, we have organised the most relevant parts for your car. Here are the components that most frequently need attention to ensure smooth power transmission:

  • Drive shafts for Skoda Felicia 1.6 LX: A complete solution when both inner and outer joints are worn, or when the shaft tube itself is corroded or damaged.
  • Outer CV joints for Skoda Felicia 1.6 LX: The most common wear part, often requiring replacement due to mechanical fatigue or contamination following a split boot.
  • CV boots for Skoda Felicia 1.6 LX: Inexpensive yet vital protection preventing premature wear and catastrophic failure of expensive joints.
  • ABS rings for Skoda Felicia 1.6 LX: A critical component to ensure the car's safety systems function correctly without unwanted fault codes.

We ensure that our stock always includes these essential parts so you can carry out your repair without unnecessary delays. Every part in our range is carefully selected to match or exceed OEM specifications for the Skoda Felicia 1.6 LX, guaranteeing long-lasting durability and dependable performance over many kilometres to come.

How to find the right part for your Skoda Felicia 1.6 LX

Navigate directly to the appropriate category for the Skoda Felicia 1.6 LX:

On a car with several possible drivetrain issues, it is best to start in the right category right away. By comparing the exact sections for the Skoda Felicia 1.6 LX, it becomes easier to distinguish between faults in a driveshaft, CV joint or propeller shaft, and proceed to the page that best matches your symptoms and fitment.

Finding the right component for a model like the Skoda Felicia 1.6 LX can sometimes be challenging due to technical variations across production years or chassis numbers. The most reliable way to identify the correct part is to select your exact make, model and engine variant in our store selector. This filters out the components technically verified for your specific car, minimising the risk of ordering the wrong part and saving valuable time in the garage.

It is always good practice to verify key technical specifications before ordering, such as the spline count on the CV joint or the shaft diameter, as these can vary between production batches. We provide detailed information regarding dimensions, threads and splines so you can compare them directly with the part removed from your vehicle. Our aim is to help you get the right part first time and avoid complicated returns. If you are unsure which component matches your specific 1.6 LX, our customer support team is on hand with specialist advice on All car makes and drivetrains.

Why shop with CVJoint24

CVJoint24 is not just another online car parts retailer; we are the international store of a Swedish driveline specialist, focusing exclusively on drivetrain and transmission components. This means we possess deep, specialist knowledge of the parts we supply, especially for models like the Skoda Felicia 1.6 LX. When you buy from us, you benefit from our fitment guarantee, giving you complete peace of mind that the spare part will fit your car without modification. We understand how important it is to get your vehicle back on the road, which is why we dispatch promptly from our central warehouse.

With an uncompromising commitment to quality and technical precision, we ensure you always receive the right product at a competitive price. Our range is hand-picked from trusted manufacturers to withstand demanding road conditions. By combining technical expertise with an efficient European logistics network, we are the natural choice for both DIY mechanics and professional garages looking for dependable driveline parts. Rely on a specialist when it comes to your car's most critical components.

Frequently Asked Questions about Drivetrain for Skoda Felicia 1.6 LX

How do I know if my Skoda Felicia 1.6 LX needs a new CV joint?

The most common signs are a clicking noise on full steering lock while driving or vibrations during acceleration. You should also check if the CV boot is split and has leaked grease.

Do all drive shafts fit all Skoda Felicia models?

No, drive shafts can vary depending on the engine variant and gearbox. The 1.6 LX has specific requirements, so always select your exact make, model and engine to find the right part.

Why do the CV boots deteriorate on my Skoda?

CV boots are made of rubber that ages, dries out and perishes over time. External factors such as road salt, cold weather and mechanical wear accelerate this process.

Can I replace just the ABS ring on my Felicia 1.6 LX?

Yes, if the constant velocity joint itself is otherwise in good condition, you can often replace just the ABS ring if it has cracked or rusted through.

Is it difficult to replace a drive shaft yourself on a Skoda Felicia 1.6 LX?

It is an intermediate job. It requires the right tools, including a large socket for the hub nut, as well as the know-how to safely release the ball joints.

What is included in a CV joint kit from CVJoint24?

Our kits are complete and typically contain the CV joint, CV boot, specialist grease, clamps, circlip and, where applicable, a new hub nut.