Skoda Kodiaq 1.4 TSI 4X4

Spare parts and drivetrain components for the Skoda Kodiaq 1.4 TSI 4X4. Confirm fitment by your make, model and engine before ordering.

Products for Skoda Kodiaq 1.4 TSI 4X4

17 products
1 - 17 of 17
Item no.:1123464
  • Position: Front left
  • Flange diameter: 108 mm
  • Total length: 500 mm
  • Splines wheel side: 36
Item no.:0574943
  • Position: Outer
  • Seal diameter: 59 mm
  • Inner splines: 27
  • Outer splines: 36
  • Joint diameter: 97,95 mm
Item no.:4120556
  • Position: Rear left
  • Flange diameter: 94 mm
  • Total length: 611 mm
  • Splines wheel side: 36
Item no.:5153024
  • Position: Rear right
  • Flange diameter: 94 mm
  • Total length: 650 mm
  • Splines wheel side: 36
Item no.:0163458
  • Position: Front right
  • Flange diameter: 108 mm
  • Total length: 614 mm
  • Splines wheel side: 36
Item no.:345383
  • Position: Inner
  • Inner splines: 28
Item no.:656197
  • Position: Rear, Outer
  • Seal diameter: 59,5 mm
  • Inner splines: 33
  • Total length: 80 mm
  • Splines gearbox side: 36
Item no.:625867
  • Position: Rear
  • Total length: 2,365 mm
Item no.:310977
  • Position: Front left
  • Flange diameter: 108 mm
  • Joint diameter: 108 mm
  • Total length: 495 mm
  • Splines wheel side: 36
Item no.:0456198
  • Position: Inner
  • Seal diameter: 94 mm
  • Inner splines: 33
  • Number of joints: 3
  • ABS teeth: 0
Item no.:623979
  • Number of joints: 1
  • Total length: 2,160 mm
Item no.:119685
  • Flange diameter: 108 mm
  • Total length: 500 mm
  • Splines wheel side: 36
Item no.:117288
  • Total length: 500 mm
  • Splines wheel side: 36
Item no.:417690
  • Total length: 606 mm
  • Splines wheel side: 36
Item no.:346060
  • Position: Inner
  • Total length: 32 mm
Item no.:0431293
  • Position: Inner
  • Seal diameter: 59,5 mm
  • Total length: 79 mm
  • Splines gearbox side: 36

Drivetrain for Skoda Kodiaq 1.4 TSI 4X4

The Skoda Kodiaq 1.4 TSI 4X4 is a technically advanced vehicle where the drivetrain plays a crucial role in delivering power to all four wheels. As drivetrain specialists, we understand the importance of every power transfer component working in perfect harmony. This specific model combines an efficient TSI engine with an intelligent all-wheel-drive system, placing high demands on the durability of both drive shafts and joints. When maintaining your Skoda Kodiaq, choosing parts that match original specifications is essential to maintain your vehicle's driving dynamics and safety system functions. We offer a carefully selected range covering the most common requirements for this exact engine and drivetrain setup.

Owning a four-wheel-drive car means the drivetrain is subjected to greater loads than on a two-wheel-drive variant. Power must be distributed between the front and rear axles, requiring components such as drive shafts and joints to operate under varying angles and torque loads. Our focus is on supplying parts that not only fit physically, but also withstand the torque and strain generated by the 1.4 TSI engine paired with the 4X4 system. By choosing the right parts from the start, you extend the service life of the entire system and reduce the risk of consequential damage to costly components such as differentials or the gearbox.

How the drivetrain is engineered on the Skoda Kodiaq 1.4 TSI 4X4

The drivetrain on a Skoda Kodiaq 1.4 TSI 4X4 is built around a transverse engine mated to a gearbox that distributes power onwards via an angle drive. Front-wheel drive is handled by two drive shafts of differing lengths connecting directly to the gearbox. To facilitate four-wheel drive, a propeller shaft runs rearward to an electronically controlled multi-plate clutch, commonly referred to as a Haldex coupling, mounted at the rear differential. From this rear differential, two further driveshafts extend to the rear wheels. This complex system demands that every component, from the smallest CV boot to the complete shaft, meets the highest quality standards to prevent vibrations and power loss.

Each drive shaft is fitted with two joints: an inner CV joint that accommodates axial movement as the suspension articulates, and an outer CV joint that allows the wheels to steer while transferring torque. On a 4X4 model like the Kodiaq, the precision of these constant velocity joints is especially critical because the system continuously adjusts torque distribution based on surface grip. Any play developing in a joint can disrupt the stability control systems and the response of the all-wheel drive. Our parts are therefore manufactured to tight tolerances to guarantee seamless integration with your car's existing mechanical and electronic systems.

Common faults and symptoms

There are several clear warning signs that drivetrain components on your Skoda Kodiaq 1.4 TSI 4X4 are wearing out. One of the most frequent symptoms of a failing outer CV joint is a rhythmic clicking or knocking noise clearly audible during sharp turns at low speeds. If the noise disappears when driving straight ahead, the outer joint is almost certainly the culprit. With inner CV joints, the symptoms differ; wear typically presents as vibrations through the vehicle body during acceleration, especially between 50 and 80 km/h. These vibrations are often felt through the seat or floor rather than the steering wheel.

Another critical area involves the CV boots. If a boot splits, lubricating grease escapes whilst road dirt and moisture penetrate the joint. This causes rapid deterioration of the hardened internal bearing surfaces. During regular servicing or inspection, checking that all boots remain intact and flexible is essential. For 4X4 owners, it is also wise to listen for prop shaft or centre bearing noises, which typically present as a whining or humming noise that changes with road speed rather than engine revs.

Common replacement parts for the Skoda Kodiaq 1.4 TSI 4X4

When it is time to repair the drivetrain on your Kodiaq, several specific component groups are most commonly needed. We have organised our catalogue so you can easily find exactly what your 1.4 TSI 4X4 requires. Here are our most requested parts:

  • Drive shaft Skoda Kodiaq 1.4 TSI 4X4 - Complete shafts for both front and rear axles when the entire assembly requires replacement.
  • Outer CV joint Skoda Kodiaq 1.4 TSI 4X4 - The primary wear part, frequently causing clicking sounds when turning.
  • Inner CV joint Skoda Kodiaq 1.4 TSI 4X4 - Essential for curing driveline vibrations under acceleration.

Alongside these core components, inspecting related hardware such as ABS rings and boot kits is always advisable. On modern cars like the Kodiaq, the ABS ring is often integrated into the wheel bearing or mounted on the CV joint, and a damaged reluctor ring can trigger braking system fault codes. Fitting a complete drive shaft can often be more cost-effective and time-efficient than overhauling individual joints, particularly if the vehicle has covered high mileage or the splines show signs of corrosion. We supply ready-to-fit parts, minimising the time your car spends in the garage.

Finding the correct part for your Skoda Kodiaq 1.4 TSI 4X4

Navigate directly to the relevant category for the Skoda Kodiaq 1.4 TSI 4X4:

When troubleshooting a vehicle with multiple potential driveline issues, beginning in the exact product category is best practice. Comparing subcategories for the Skoda Kodiaq 1.4 TSI 4X4 makes it simple to distinguish between drive shaft, CV joint or propeller shaft faults, taking you straight to the section matching your symptoms and fitment.

Identifying the correct spare part for a modern SUV can be complex, as multiple variations may exist depending on production date, transmission type (manual or DSG) and chassis numbers. For the Skoda Kodiaq 1.4 TSI 4X4, verifying specifications is particularly important because four-wheel-drive variants often feature different shaft dimensions compared to front-wheel-drive models. The most reliable approach is to select your vehicle by make, model and engine variant, which filters down the components engineered for your car's technical setup.

Once your results appear, we recommend cross-referencing technical dimensions such as spline tooth counts on both inner and outer joints, as well as overall shaft length when ordering a complete driveshaft. We provide comprehensive technical specifications to ensure total confidence before you buy. If you require assistance, our customer service team is on hand to help you navigate our catalogue. Sourcing from a dedicated specialist gives you access to niche expertise that general motor factors often lack, ensuring you get the correct component first time.

Why buy from CVJoint24?

CVJoint24 is more than just an online shop; we are the international store of a Swedish driveline specialist dedicated to high-quality power transmission parts. Choosing us for your Skoda Kodiaq 1.4 TSI 4X4 gives you access to an extensive range few general retailers can match. We appreciate that your car is vital to your daily routine, which is why we supply dependable, quality-assured parts engineered to handle tough European driving conditions. Our ethos centres on delivering the right part at the right price, supported by knowledgeable service for complete peace of mind.

We provide a reliable fitment promise: if you select your part using your vehicle's make, model and engine and run into any compatibility issues, our team will resolve it quickly and smoothly. Thanks to our efficient logistics network, we ship rapidly from our central Swedish warehouse straight to your door across the EU, helping get your car off the ramp without delay. Combining technical expertise with reliable customer support, we are the trusted choice for DIY mechanics and professional garages looking for parts for Skoda and other marques in our All car makes section. Turn to a true specialist who knows your vehicle's drivetrain inside out.

Frequently asked questions about Drivetrain for Skoda Kodiaq 1.4 TSI 4X4

What are the most common signs of a worn or damaged drive shaft on my Kodiaq 4X4?

The most common symptoms are vibrations under acceleration (inner joint) or a clicking noise at full steering lock (outer joint). On a 4X4 model, you might also experience unbalance or unusual noises from the propeller shaft.

Can I use parts from a front-wheel-drive Kodiaq on my 1.4 TSI 4X4?

No, usually not. Four-wheel-drive models frequently require specific drive shaft lengths and dimensions to accommodate the transfer box and rear differential. Always select your vehicle make, model and engine to ensure the correct specification.

Are the CV boot and grease included when I buy an individual CV joint from you?

Yes, when you purchase a CV joint kit from us, it normally includes the joint itself, a tailored CV boot, high-quality grease, and the required fitting accessories such as clips and bolts/nuts.

How does your fitment guarantee work for the Skoda Kodiaq?

When you select your car's exact make, model and engine details when ordering, we guarantee that the part will fit your vehicle. Should it turn out to be incorrect against all expectations, we will rectify this swiftly at no extra cost to you.

Is it difficult to replace a drive shaft yourself on a Kodiaq 1.4 TSI?

It requires solid mechanical knowledge, the right tools (including a torque wrench and sockets for the centre hub bolt), and access to a ramp or sturdy axle stands. If you are unsure, the job should be carried out by a professional garage.

How quickly can I receive my spare parts?

We aim to dispatch your order promptly from our warehouse, keeping downtime for your vehicle to a minimum when the item is in stock.