Skoda Octavia II Combi 2.0 TDI 16V

Drivetrain parts and components for the Skoda Octavia II Combi 2.0 TDI 16V. Select your make, model and engine variant to guarantee correct fitment.

Products for Skoda Octavia II Combi 2.0 TDI 16V

53 products
1 - 24 of 53
Item no.:0452277
  • Position: Inner
  • Inner splines: 28
  • Joint diameter: 108 mm
Item no.:0466304
  • Position: Front, Inner
  • Seal diameter: 119 mm
  • Inner splines: 34
Item no.:0547359
  • Position: Front, Outer
  • Seal diameter: 59 mm
  • Inner splines: 27
  • Outer splines: 36
  • Joint diameter: 97,95 mm
Item no.:0132979
  • Position: Front right
  • Total length: 484 mm
  • Splines gearbox side: 37
Item no.:1185031
  • Position: Front left
  • Flange diameter: 108 mm
  • Total length: 488 mm
  • Splines wheel side: 36
Item no.:1174099
  • Position: Front left
  • Flange diameter: 119 mm
  • Total length: 475 mm
  • Splines gearbox side: 119
  • Splines wheel side: 36
Item no.:2164355
  • Position: Front right
  • Flange diameter: 119 mm
  • Total length: 754 mm
  • Splines wheel side: 36
Item no.:1268035
  • Position: Front left
  • Total length: 405 mm
  • Splines gearbox side: 28
  • Splines wheel side: 27
Item no.:2237879
  • Position: Front right
  • Total length: 715 mm
  • Splines gearbox side: 28
  • Splines wheel side: 27
Item no.:1123399
  • Position: Front left
  • Flange diameter: 108 mm
  • Total length: 486 mm
  • Splines gearbox side: 108
  • Splines wheel side: 36
Item no.:2122583
  • Position: Front right
  • Flange diameter: 108 mm
  • Total length: 780 mm
  • Splines gearbox side: 108
  • Splines wheel side: 36
Item no.:2112476
  • Position: Front right
  • Flange diameter: 108 mm
  • Total length: 806 mm
  • Splines gearbox side: 108
  • Splines wheel side: 36
Item no.:241947
  • Position: Front right, Inner
  • Inner splines: 34
  • Splines wheel side: 23
Item no.:242738
  • Position: Front right, Inner
Item no.:0435033
  • Position: Inner
  • Seal diameter: 94 mm
  • Inner splines: 33
  • Number of joints: 3
  • Splines gearbox side: 33
Item no.:657778
  • Position: Rear, Outer
  • Seal diameter: 59 mm
  • Inner splines: 33
  • Total length: 80 mm
  • Splines gearbox side: 36
Item no.:0120128
  • Position: Front right
  • Total length: 810 mm
  • Splines gearbox side: 23
  • Splines wheel side: 36
Item no.:314544
  • Position: Front
  • Total length: 758 mm
  • Splines wheel side: 36
Item no.:319396
  • Position: Front
  • Splines wheel side: 36
Item no.:2116539
  • Position: Front right
  • Total length: 799 mm
  • Splines gearbox side: 23
  • Splines wheel side: 36
Item no.:315994
  • Position: Front
  • Total length: 475 mm
  • Splines wheel side: 36
Item no.:2194914
  • Position: Front right
  • Total length: 793 mm
  • Splines wheel side: 36
Item no.:341713
  • Position: Front, Inner
  • Inner splines: 28
  • Total length: 32 mm
Item no.:0681973
  • Total length: 86 mm
Showing 1–24 of 53 products

Drivetrain for Skoda Octavia II Combi 2.0 TDI 16V

The Skoda Octavia II Combi 2.0 TDI 16V is one of the most popular models in its class, celebrated for its practical estate space and its punchy 16-valve turbo-diesel engine. This powerplant delivers substantial torque, often exceeding 320 Nm, which places considerable demands on the car's drivetrain and power transmission. As an owner of an Octavia II Combi with this engine, it is important to remember that these drivetrain components operate under sustained high loads, particularly when towing or carrying heavy payloads. At CVJoint24, you will find an extensive selection of spare parts engineered to meet or exceed original equipment specifications for this exact model. We focus on supplying parts that preserve your car's long-term driving dynamics. By choosing the right drive shaft for your Skoda Octavia II Combi 2.0 TDI 16V from our central warehouse, you ensure that engine power reaches the wheels cleanly, safely and efficiently, without unnecessary energy loss or the risk of sudden mechanical failure.

How the drivetrain is engineered on the Skoda Octavia II Combi 2.0 TDI 16V

The drivetrain layout of the Skoda Octavia II Combi 2.0 TDI 16V is a sophisticated assembly built for both refinement and durability. The system relies on several critical components, with the drive shafts handling the crucial job of transferring rotational power from the gearbox to the wheels. For all-wheel-drive variants (4x4), a robust propeller shaft runs down the centre of the car to drive the rear axle. Each driveshaft is equipped with two constant velocity joints: an inner CV joint, typically a tripod design that accommodates axial plunge as the suspension moves, and an outer CV joint that provides a wide steering angle at the wheel hub. These joints are high-precision components that depend on continuous lubrication, sealed securely by protective CV boots. On this particular Skoda model, an integrated ABS ring on the outer CV joint is also common, playing a vital role in wheel speed sensing for your anti-lock braking and stability systems. Understanding how these parts interact is key to keeping the vehicle performing at its best.

Common faults and symptoms

Catching drivetrain faults early can save you significant time and costly garage repairs. On the Skoda Octavia II Combi 2.0 TDI 16V, one of the most familiar signs of wear is a rhythmic clicking or knocking noise when turning sharply at low speeds. This noise almost always points to a worn outer CV joint, typically caused by a split CV boot that has lost its grease and let in road grit. Another common symptom is shuddering or vibration felt through the car body under acceleration, which is usually traced back to excessive play in an inner CV joint. On 4x4 models, be alert to propshaft imbalance or worn centre bearings, which tend to produce a low-pitched drone or humming vibration at specific road speeds. It is also wise to inspect the inner rims of your alloy wheels regularly; grease flung onto the wheels is a clear warning sign of a torn drive shaft boot that demands prompt attention before the joint itself fails.

Common replacement parts for the Skoda Octavia II Combi 2.0 TDI 16V

When maintenance is due, certain driveline parts are more frequently replaced on the Skoda Octavia II Combi 2.0 TDI 16V. Our inventory is tailored to the real-world repair needs and technical variations of this vehicle. We supply:

  • Drive shafts: We stock 10 distinct complete drive shafts, covering both manual and DSG dual-clutch gearboxes across front-wheel-drive and 4x4 configurations.
  • Outer CV joints: High-quality kits engineered specifically for the 2.0 TDI diesel powertrain, complete with boot, clips and fitting hardware.
  • Inner CV joints: A targeted range of options providing precise fitment to eradicate driveline shudder under power.
  • Propeller shafts: For 4x4 models, we stock 7 distinct prop shaft configurations, offering exceptional coverage for all-wheel-drive estates.

Fitting a complete replacement drive shaft is often more economical and less labour-intensive than replacing individual joints, especially if the original shaft shows signs of corrosion, worn splines or fatigue. By renewing worn driveline parts before total failure, you protect connected components such as wheel bearings, suspension bushes and gearbox differential seals from secondary damage.

Finding the correct part for your Skoda Octavia II Combi 2.0 TDI 16V

Navigate directly to the required component section for your Skoda Octavia II Combi 2.0 TDI 16V:

When diagnosing driveline issues, selecting the right subcategory from the outset ensures accurate ordering. By comparing the specific part categories for the Skoda Octavia II Combi 2.0 TDI 16V, you can pinpoint whether your symptoms call for a complete drive shaft, an outer joint, an inner joint or a replacement propshaft, leading you straight to parts with verified vehicle fitment.

Double-checking technical details such as the inner joint gearbox flange diameter, overall compressed length or the spline count on the outer stub shaft guarantees a smooth, hassle-free installation. You can also view our full range for the wider brand family under our main Skoda category.

Why buy your drivetrain parts from CVJoint24?

Buying from CVJoint24 connects you directly with a dedicated Swedish driveline specialist shipping from our central European distribution warehouse in Helsingborg, Sweden. We understand the precise engineering demands of the Skoda Octavia II Combi 2.0 TDI 16V and only supply car parts built for durability and dependable fit. Unlike general motor factors, our catalogue is built around technical expertise in driveshafts, constant velocity joints and prop shafts. You can order with absolute confidence by selecting your exact make, model and engine variant, backed by our dedicated fitment guarantee. With fast dispatched orders across the European Union, we help ensure your car spends less time off the road and more time driving smoothly. Choose CVJoint24 for competitive prices, specialised stock and professional driveline support.

Frequently asked questions about Drivetrain for Skoda Octavia II Combi 2.0 TDI 16V

Does the same drive shaft fit both manual and DSG gearboxes on an Octavia II 2.0 TDI?

No, the length and mounting usually differ between manual and DSG gearboxes. Always select your specific make, model and engine to find the correct version for your transmission type.

How do I know if the propeller shaft on my Skoda Octavia 4x4 is failing?

Common signs include vibrations through the floorpan or a low humming noise that increases with speed, typically caused by imbalance or worn joints in the propeller shaft.

What causes a clicking noise when turning in my Skoda?

This is usually caused by a worn outer CV joint. When grease leaks out or dirt enters the joint, the steel balls and raceways wear out quickly, creating the characteristic clicking noise.

Can I replace just the inner CV joint instead of the complete shaft?

Yes, if the drive shaft itself is undamaged, you can replace just the inner joint to cure vibrations during acceleration, which is a cost-effective repair.

Are the CV boot and grease included when I buy a CV joint from you?

Yes, our CV joint kits are supplied complete with a CV boot, high-quality grease, clamps, and the bolts or nuts required for correct installation.

What does the fitment guarantee at CVJoint24 mean?

When you select your car by make, model and engine variant, we ensure that the part fits your vehicle. Should anything still not be quite right, we will help you exchange it for the correct part quickly and hassle-free.