Skoda Scala

Spare parts and drivetrain components for the Skoda Scala.

Choose version

Choose a version to refine the results and get closer to the right product.

Products for Skoda Scala

76 products
1 - 24 of 76
Item no.:0419122
  • Position: Inner
  • Inner splines: 30
  • Outer splines: 110
Item no.:0551093
  • Position: Outer
  • Inner splines: 30
  • Seal diameter: 52 mm
  • Outer splines: 36
  • Thread size: M16X1,5
Item no.:0519231
  • Position: Outer
  • Inner splines: 33
  • Splines wheel side: 36
  • Seal diameter: 52 mm
  • Outer splines: 36
Item no.:1186266
  • Position: Front left
  • Splines wheel side: 36
  • Total length: 500 mm
  • Joint diameter: 90 mm
  • Joint diameter, gearbox side: 110 mm
Item no.:2114705
  • Position: Front right
  • Splines wheel side: 36
  • Total length: 802 mm
  • Joint diameter: 90 mm
  • Joint diameter, gearbox side: 110 mm
Item no.:2109340
  • Position: Front right
  • Splines wheel side: 36
  • Total length: 778 mm
  • Flange diameter: 110 mm
Item no.:1184400
  • Position: Front left
  • Splines wheel side: 36
  • Total length: 533 mm
  • Joint diameter: 90 mm
  • Joint diameter, gearbox side: 100 mm
Item no.:2174167
  • Position: Front right
  • Splines wheel side: 36
  • Total length: 825 mm
  • Joint diameter: 90 mm
  • Flange diameter: 100 mm
Item no.:214364
  • Position: Front right
  • Splines wheel side: 36
  • Total length: 780 mm
  • Diameter 1: 90 mm
  • Diameter 2: 110 mm
Item no.:343791
  • Position: Front, Inner
  • Inner splines: 28
  • Seal diameter: 108 mm
  • Total length: 32 mm
  • Joint diameter: 107 mm
Item no.:356495
  • Position: Front, Outer
  • Inner splines: 27
  • Seal diameter: 52 mm
  • Outer splines: 36
  • Thread size: M16X1,5
Item no.:0600428
  • Total length: 120 mm
Item no.:0692164
  • Total length: 102 mm
Item no.:348824
  • Position: Front, Inner
  • Inner splines: 33
  • Seal diameter: 100 mm
  • Total length: 34 mm
  • Joint diameter: 100 mm
Item no.:0606930
  • Total length: 116 mm
Item no.:0626974
  • Total length: 110 mm
Item no.:0639424
  • Total length: 125 mm
Item no.:0644612
  • Total length: 111 mm
Item no.:0991011
  • Inner diameter: 38 mm
  • Outer diameter: 63 mm
Item no.:1176052
  • Position: Front left
  • Splines gearbox side: 33
  • Splines wheel side: 36
  • Total length: 640 mm
  • Joint diameter: 90 mm
Item no.:2147299
  • Position: Front right
  • Splines gearbox side: 33
  • Splines wheel side: 36
  • Total length: 907 mm
  • Joint diameter: 90 mm
Item no.:0415962
  • Position: Inner
  • Inner splines: 30
  • Seal diameter: 39,9 mm
  • Total length: 163,5 mm
  • Outer splines: 33
Showing 1–24 of 76 products

Drivetrain for Skoda Scala

The Skoda Scala represents a modern generation of compact cars engineered for efficiency and driving pleasure. Maintaining these characteristics requires a drivetrain in peak condition. The drivetrain for the Skoda Scala is built to manage the torque output of contemporary turbocharged engines, setting high demands on materials and engineering precision. As your dedicated drivetrain specialist, we supply components carefully chosen to fit this specific model. We understand that every component in the power transmission system—from the smallest circlip to the complete shaft assembly—plays a decisive role in overall vehicle performance. Investing in high-quality spare parts ensures your car stays reliable for many kilometres to come. Our focus is on providing parts that not only fit precisely, but also perform to the technical standards required by a modern Skoda.

How the Skoda Scala drivetrain is designed

Power transmission in a Skoda Scala is a sophisticated system that starts at the engine and finishes at the driven front wheels. The system is laid out around a transverse engine that delivers power through the gearbox to the differential. From there, power is distributed across two drive shafts. Each drive shaft for the Skoda Scala is an impressive piece of engineering in itself, comprising a solid or tubular shaft with two flexible joints. The inner joint, typically a tripod type, mounts to the gearbox and allows the shaft to plunge in and out as the suspension moves. The outer constant velocity joint is a Rzeppa design that accommodates sharp steering angles while continuing to drive the car forward. The entire assembly relies on flawless lubrication, making durable CV boots vital to protect the system's operational integrity.

Common faults and symptoms

Identifying drivetrain issues early can save both time and money. For Skoda Scala owners, the most frequent sign of wear is a rhythmic clicking or snapping noise when cornering sharply, such as during parking manoeuvres. This is a classic indicator that an outer CV joint for the Skoda Scala has begun to fail, often because road grit and moisture entered through a damaged CV boot. Another common symptom is vibration felt through the floorpan at specific road speeds or under heavy acceleration. These vibrations often point to a worn inner CV joint for the Skoda Scala, where play has developed inside the joint's bearing tracks. It is also worth checking for grease splattered inside the wheel rim or across the suspension, as this confirms a torn boot and warns that joint failure will soon follow if not resolved promptly.

Common parts to replace on the Skoda Scala

When repairs become necessary, there are several practical solutions depending on the extent of the wear. On a Skoda Scala, replacing only the damaged component is often the most economical route, though fitting a complete driveshaft can be the ideal solution to guarantee long-term dependability. Our comprehensive range for the Scala includes model-specific parts tailored to every requirement. The primary categories for your car are:

  • Drive shafts for Skoda Scala
  • Outer CV joints for Skoda Scala
  • Inner CV joints for Skoda Scala

Selecting the correct component requires verifying your vehicle's specific configuration, as shaft lengths and joint splines can differ across the Scala range. Replacing worn components promptly safeguards the car's original handling and prevents unexpected breakdowns.

How to find the right part for your Skoda Scala

Continue to the relevant product section for your Skoda Scala:

When diagnosing drivetrain symptoms, starting in the right section ensures a straightforward repair. By exploring our specific product areas for the Skoda Scala, you can easily distinguish between drive shaft, CV joint or prop shaft components and head straight to the parts that match your vehicle's exact fitment.

Ordering the exact replacement for your Skoda Scala relies on accurate vehicle details. Drivetrain variants differ across several technical parameters, including the spline count on shaft ends and variations in hub assemblies between different gearbox specifications. The simplest way to navigate our range is to filter by your car's make, model and engine variant. This instantly isolates the components engineered specifically for your car. We also recommend carrying out a quick visual check against the original component or measuring the shaft length to verify your selection before ordering. Our database is continuously refined to keep Skoda Scala vehicle data accurate and current.

Why shop at CVJoint24

Shopping at CVJoint24 means dealing with specialists who have dedicated expertise in this technical niche. Rather than operating as a general car parts retailer, we are a Swedish driveline specialist focusing purely on drivetrains and power transmission systems. This dedication allows us to deliver a depth of range that general motor factors rarely match, especially for modern vehicles such as the Skoda Scala. We insist on uncompromising quality and accurate fitment at every step, from supplier selection to technical customer advice. Filtering by your car's make, model and engine makes it easy to find parts that fit your vehicle with complete confidence. We take pride in serving motorists and workshops across Europe who demand specialist knowledge, swift dispatch from Helsingborg and dependable parts for their vehicle's running gear.

Frequently Asked Questions about Drivetrain for Skoda Scala – Power Transmission Spare Parts

How do I know if my Skoda Scala needs a new drive shaft?

The most common symptoms are vibrations under acceleration or unusual noises while driving. If vibrations can be felt throughout the whole car, it is often the inner joint or the shaft itself that is unbalanced.

What causes a clicking noise when turning in my Skoda Scala?

A clicking noise at full steering lock is almost always caused by a worn outer CV joint. This often happens because a CV boot has split, allowing the grease to escape and dirt to enter.

Do all drive shafts fit every engine variant of the Skoda Scala?

No, drive shafts vary depending on whether you have a 1.0 TSI, 1.5 TSI or diesel engine, as well as whether the car has a manual gearbox or DSG. Always select your exact make, model and engine to find the right part.

Can I replace just the CV joint instead of the complete drive shaft?

Yes, on the Skoda Scala it is often possible to replace only the inner or outer CV joint if the shaft itself is undamaged, which can be a more economical option.

Why is it important to replace a damaged CV boot immediately?

The CV boot protects the CV joint. If it splits, grease escapes and road dirt grinds down the joint's bearing surfaces, quickly leading to complete failure.

How many splines does a CV joint have for the Skoda Scala?

The spline count varies between different versions of the Scala. It is therefore essential to check the specifications or select your model and engine to ensure the correct fit.