Smart Crossblade

Welcome to CVJoint24, your Swedish driveline specialist for the Smart Crossblade. This unique car demands precision spare parts to preserve its distinctive handling and safety. We offer...

Products for Smart Crossblade

3 products
1 - 3 of 3
Item no.:0331749
  • Position: Rear
  • ABS teeth: 42
  • Inner diameter: 68,6 mm
  • Outer diameter: 81 mm
  • Width: 10,5 mm
Item no.:4121565
  • Position: Rear left
  • Splines gearbox side: 33
  • Splines wheel side: 24
  • Total length: 475 mm
  • ABS teeth: 42
Item no.:5143958
  • Position: Rear right
  • Splines gearbox side: 33
  • Splines wheel side: 24
  • Total length: 712 mm
  • ABS teeth: 42

Smart Crossblade drivetrain

The Smart Crossblade is one of the most distinctive cars on the road, and its drivetrain lies right at the heart of the open-air driving experience it delivers. As a dedicated driveline specialist, we at CVJoint24 understand how essential it is that every single component on your Smart Crossblade works in complete harmony. Despite the car's ultra-compact footprint, significant demands are placed on its running gear, especially when delivering power cleanly from the engine to the tarmac. We stock a dedicated range tailored specifically to this rare model, ensuring you never have to compromise on quality. Owning a Crossblade means looking after its unique mechanical layout, and choosing the right spare parts will extend the service life of your car considerably. Our focus is on supplying parts that meet or exceed original equipment specifications, giving you complete confidence through every turn.

How the drivetrain is engineered on the Smart Crossblade

The layout of the drivetrain in a Smart Crossblade follows the brand's classic rear-engine, rear-wheel-drive configuration. This means the drive shafts are relatively short and must cope with steep operating angles and torque within very confined packaging. Driving power travels from the gearbox via the inner CV joints, through the drive shaft, and out to the outer CV joints that connect to the wheel hubs. A vital component in this setup is the ABS ring, which is typically mounted on the outer end of the drive shaft. This ring is monitored continuously by an ABS sensor to regulate both braking and traction control. Because the Crossblade is an entirely open vehicle, the chassis and running gear are exposed more directly to the elements, making it crucial that CV boots and seals remain completely intact to safeguard the greased internal joints.

Common faults and symptoms

There are several telltale signs that the drivetrain on your Smart Crossblade is starting to wear out. One of the most frequent symptoms is a distinct shudder or vibration during acceleration, which typically points to excessive wear in the inner constant velocity joints. If you hear a rhythmic clicking or snapping noise when negotiating tight turns, the outer CV joints are almost always the cause. Another problem typical of this platform is an ABS warning light on the dash, frequently triggered by a cracked or heavily corroded ABS reluctor ring that prevents the sensor from reading wheel speeds accurately. You might also spot grease splattered on the inside of the road wheel or across the underside of the car, which points to a torn drive shaft boot. Left unattended, road dirt penetrates the joint and quickly ruins it. Catching these early warning signs can save you from costly remedial repairs further down the line.

Common parts to replace on the Smart Crossblade

For the Smart Crossblade, two categories of car parts are most frequently required when servicing the power transmission. Drawing on our specialist experience and warehouse inventory, complete drive shafts and separate ABS rings are the parts most in demand. Installing a complete drive shaft is usually the most economical and reliable fix for significant wear, as it renews both inner and outer joints alongside the shaft itself in a single operation. The ABS ring is a smaller but essential item that frequently needs replacement because harsh European road salt accelerates surface corrosion.

  • Drive shafts for Smart Crossblade – Complete assemblies for straightforward installation and maximum durability.
  • ABS rings for Smart Crossblade – Precision components engineered to restore full ABS and traction control functionality.

Fitting the right car parts from the outset ensures your Smart Crossblade remains dependable and that vital electronic safety aids perform exactly as the factory intended. We make sure you receive components accurately matched to your car's technical specifications.

Finding the right part for your Smart Crossblade

Navigate directly to the relevant category for your Smart Crossblade:

When troubleshooting driveline problems on your vehicle, starting in the precise subcategory saves valuable time. By comparing the exact component sections for the Smart Crossblade, you can readily tell whether you require a drive shaft, a CV joint or a propeller shaft, and proceed to the section that best matches your symptoms and fitment needs.

Sourcing suitable parts for an exclusive vehicle like the Smart Crossblade can sometimes feel challenging, but we make the process straightforward and dependable. The most reliable way to secure a correct fit is to select your car's make, model and engine variant in our store selector. Filtering by your exact vehicle brings up only the components engineered to fit your car. Because the Crossblade shares certain platform components with other Smart models while retaining bespoke features, guesswork should be avoided. All our products are thoroughly indexed against original technical data. Whether you require an entire replacement driveshaft or just an ABS ring, you can rely on our cataloguing to get the job done right the first time.

Why shop at CVJoint24?

CVJoint24 is no generic car-parts retailer; we are an international shop backed by Swedish driveline specialists shipping from our Helsingborg distribution centre across the EU. Shopping with us gives you access to focused technical expertise that is hard to match elsewhere. We know the mechanical nuances of All car makes inside out and continuously maintain broad availability for both everyday vehicles and niche models such as the Smart Crossblade. With our precise fitment assurance, you can order with absolute peace of mind, and our efficient dispatch ensures your car spends minimal time off the road. We combine high-quality products with informed, specialist advice. Whether you are after components for a Smart or any other vehicle, we are your trusted partner for driveline and power transmission parts.

Frequently Asked Questions about Drivetrain for Smart Crossblade

Does the drive shaft fit all Smart Crossblade models?

Yes, the drive shafts we list for the Smart Crossblade are specifically selected to fit the model's unique chassis. We always recommend checking your car's make, model and engine to ensure 100% compatibility.

Why does the ABS ring fail on my Smart?

The ABS ring on Smart models is frequently exposed to corrosion. As rust builds up underneath the ring, it expands and eventually cracks, preventing the ABS sensor from reading the wheel speed correctly.

Can I replace just the CV joint or do I have to replace the complete shaft?

On the Smart Crossblade, it is often most practical to replace the complete drive shaft if the joints are worn, as this ensures all components are brand new and balanced; however, we also offer individual components where possible.

How do I know whether the inner or outer CV joint is failing?

Outer CV joints typically produce a clicking noise when cornering, whereas inner CV joints tend to cause vibrations throughout the car under acceleration.

Is it difficult to replace a drive shaft on a Smart Crossblade?

Because the car is so compact, working space is limited, but for a DIY mechanic with workshop experience it is a perfectly manageable job. However, it does require the correct tools to undo the hub nut and detach the shaft from the gearbox.

Are CV boots included when I buy a drive shaft?

Yes, when you purchase a complete drive shaft from us, it always includes pre-fitted CV boots, grease and the necessary mounting hardware so you can carry out the replacement straight away.