Subaru Legacy II Estate

Spare parts and drivetrain components for the Subaru Legacy II Estate.

Products for Subaru Legacy II Estate

33 products
1 - 24 of 33
Item no.:0417734
  • Position: Inner
  • Inner splines: 29
  • Seal diameter: 41 mm
  • Total length: 111,5 mm
  • Joint diameter: 75 mm
Item no.:0564196
  • Position: Outer
  • Inner splines: 22
  • Seal diameter: 56 mm
  • Outer splines: 27
  • Thread size: M22X1,5
Item no.:3131980
  • Position: Front
  • Splines gearbox side: 25
  • Splines wheel side: 27
  • Total length: 685 mm
  • Joint diameter: 87 mm
Item no.:347553
  • Position: Inner
  • Inner splines: 22
  • Splines gearbox side: 25
  • Seal diameter: 40 mm
  • Outer diameter: 75 mm
Item no.:7308058
  • Position: Front
  • Splines gearbox side: 25
  • Splines wheel side: 27
  • Total length: 681 mm
  • Joint diameter: 84 mm
Item no.:0579363
  • Position: Outer
  • Inner splines: 30
  • Seal diameter: 56 mm
  • Outer splines: 27
  • Thread size: M22X1,5
Item no.:0682959
  • Total length: 84 mm
Item no.:622428
  • Position: Rear
  • Total length: 1,612 mm
Item no.:627841
  • Total length: 35 mm
  • Diameter: 22 mm
Item no.:0903065
  • Inner diameter: 30 mm
  • Outer diameter: 50 mm
Item no.:0637178
  • Total length: 92 mm
Item no.:352484
  • Position: Front, Outer
  • Inner splines: 30
  • Seal diameter: 56 mm
  • Outer splines: 27
  • Thread size: M22X1,5
Item no.:0973097
  • Inner diameter: 32 mm
  • Outer diameter: 52 mm
Item no.:0947534
  • Inner diameter: 30 mm
  • Outer diameter: 50 mm
Item no.:0909202
  • Inner diameter: 32 mm
  • Outer diameter: 50 mm
Item no.:0621232
  • Total length: 89 mm
Item no.:398178
  • Position: Front
  • Inner diameter: 32 mm
  • Outer diameter: 50 mm
Item no.:0903248
  • Inner diameter: 35 mm
  • Outer diameter: 50 mm
Item no.:352247
  • Position: Front, Outer
  • Inner splines: 30
  • Seal diameter: 56 mm
  • Outer splines: 27
  • Thread size: M22X1,5
Item no.:0978119
  • Inner diameter: 35 mm
  • Outer diameter: 67 mm
Item no.:0644164
  • Total length: 90 mm
Item no.:347488
  • Position: Front, Inner
  • Inner splines: 21
  • Splines gearbox side: 22
  • Seal diameter: 32 mm
  • Outer diameter: 72 mm
Item no.:641265
  • Position: Rear, Inner
  • Inner splines: 22
  • Splines gearbox side: 20
  • Seal diameter: 32 mm
  • Outer diameter: 75 mm
Showing 1–24 of 33 products

Drivetrain for Subaru Legacy II Estate

The Subaru Legacy II Estate is renowned for its robust construction and advanced all-wheel-drive system. To ensure these cars retain their characteristic roadholding and safety, it is vital that all drivetrain components work properly. As Swedish specialists in All car makes drivetrain components, we understand the particular demands placed on Subaru power transmission. Wear on drive shafts and joints causes unwelcome noises and undermines the car's all-wheel drive, which can lead to expensive damage to differentials and the gearbox.

Our range for the Subaru Legacy II Estate is chosen to match or exceed original specifications. We focus on components engineered to handle tough European winters and the heavy demands of all-wheel drive. Choosing the right parts straight away ensures your car stays dependable for many years to come. We have thorough technical knowledge of how these parts interact and will gladly help you find the right solution for your specific car.

How the drivetrain is engineered on the Subaru Legacy II Estate

The drivetrain on a Subaru Legacy II Estate is built around the brand's celebrated Symmetrical All-Wheel Drive system. Power travels linearly from the engine through the gearbox to both the front and rear axles. This symmetrical arrangement provides optimal balance and grip. The front suspension uses two drive shafts fitted with both inner and outer CV joints. The outer joints allow the wheels to turn while transmitting power, whilst the inner joints absorb the angles caused by suspension movement.

Because power is directed continuously to all four wheels, the constant velocity joints must cope with relentless torque—unlike in front- or rear-wheel-drive cars. This requires first-class lubrication and fully intact CV boots. If a CV boot tears, the grease escapes quickly and road grime gets in, causing rapid wear. Understanding this assembly is essential for proper maintenance and for catching problems early before they result in a complete breakdown on the road.

Common faults and symptoms

There are several classic signs that the drivetrain on your Subaru Legacy II Estate needs attention. The most common symptom is a rhythmic clicking or knocking noise when taking a tight turn, particularly under acceleration. This sound almost always points to a worn outer CV joint that needs replacing. If the sound is more of a grinding noise, a wheel bearing may be responsible, though frequently the steel balls inside the constant velocity joint have developed play in their tracks.

Another common symptom is vibration through the chassis or seat under acceleration that disappears when lifting off the throttle. This typically points to imbalance or wear inside an inner CV joint. It is also important to look for grease splattered inside the wheels or across the wheel arch, which clearly indicates a split drive shaft boot. Catching this early means you can sometimes get away with fitting a new boot and cleaning the joint, but once noises start, the wear has usually progressed too far.

Common replacement parts for the Subaru Legacy II Estate

To make your repair easier, we have categorised the most relevant parts for your car. Based on our data for the Subaru Legacy II Estate, the following components are most in demand:

  • Drive shaft Subaru Legacy II Estate – A complete solution including both inner and outer joints, ideal when there is extensive wear.
  • Outer CV joint Subaru Legacy II Estate – The most frequent wear part, usually responsible for clicking noises while turning.
  • Inner CV joint Subaru Legacy II Estate – Eliminates vibrations during acceleration and transfers power smoothly from the gearbox.

We currently stock several outer CV joints and complete driveshafts for this model, showing our breadth and dedication. Replacing worn parts with correctly specified new ones restores your car's original driving dynamics and prevents costly secondary damage to other all-wheel-drive components.

Finding the right part for your Subaru Legacy II Estate

Proceed to the correct section for your Subaru Legacy II Estate:

When dealing with a car that has several potential drivetrain issues, it pays to begin in the right category. By checking the exact sections for the Subaru Legacy II Estate, it is straightforward to identify whether the problem lies with a drive shaft, CV joint or propeller shaft, taking you directly to the page matching your symptoms and fitment.

Choosing the correct spare part for a Subaru can be tricky, as details vary across engine choices and production dates. The most reliable method to select the right part for your Subaru Legacy II Estate is to filter by make, model and engine variant in our shop. This narrows the selection to components that match your car's exact specifications, saving time and preventing ordering errors.

Once you have selected your part, it is always good practice to double-check the key technical details. Check the spline count on the shaft end entering the wheel hub, and verify whether your car has ABS, as this dictates whether the joint requires an integrated ABS ring. We provide comprehensive technical specifications for each item, including dimensions and tooth counts, so you can compare them with your old part before beginning installation.

Why buy from CVJoint24?

CVJoint24 is not just another car parts shop; we are the international shop of a Swedish specialist dedicated specifically to drivetrains and power transmission. Our depth of expertise means we provide technical advice and product knowledge that general retailers cannot match. We know the technical details of the Subaru Legacy II Estate inside out and keep our inventory tailored to this model. With our comprehensive range, you can be sure of finding the right part, whether for a standard car or a rare variant.

Buying from us gives you expert-selected parts backed by specialist know-how. We dispatch orders across the EU directly from our central warehouse in Helsingborg, Sweden, ensuring a dependable, accurate buying experience. Our aim is to be the obvious destination for every Subaru owner looking for quality, expertise and smooth service. By specialising strictly in drivetrains, we offer higher quality parts and more precise advice than broad car-part stores.

Frequently Asked Questions about Drivetrain for Subaru Legacy II Estate

How do I know if the inner or outer CV joint is faulty on my Subaru?

A worn outer CV joint typically produces a clicking or knocking noise on full steering lock while driving. A failing inner CV joint is more likely to cause noticeable vibrations through the car under acceleration, whether driving straight or turning.

How do I find the right parts for my Legacy II Estate?

Simply select your car's make, model, year and engine variant to filter out the correct drive shafts and CV joints designed specifically for your vehicle.

Is it difficult to replace a drive shaft on a Subaru Legacy II Estate?

It requires suitable tools and some mechanical experience, especially as the drive shaft is secured into the gearbox and the wheel hub. We recommend consulting a workshop manual and using the correct torque wrench.

Do I need to replace both drive shafts at the same time?

No, there is no need to replace both sides simultaneously if only one is damaged. However, it is sensible to inspect the CV boots on the opposite side while the vehicle is raised.

What happens if I drive with a failing CV joint?

In the worst case, the joint can seize or shear completely, resulting in a sudden loss of drive and leaving you stranded. A catastrophic failure can also cause secondary damage to the wheel hub or gearbox.

Are the boot and grease included when I buy a CV joint from you?

Yes, when you buy a CV joint from us, it arrives as a complete kit including the CV boot, grease, clamps and usually a new hub bolt or nut.