Subaru Leone II Estate

Welcome to your specialist in drivetrain parts for the Subaru Leone II Estate. Maintaining the power transmission on a classic Subaru demands components with exact fitment and...

Products for Subaru Leone II Estate

21 products
1 - 21 of 21
Item no.:0504569
  • Position: Outer
  • Inner splines: 23
  • Seal diameter: 58 mm
  • Outer splines: 30
  • Thread size: M28X1,5
Item no.:3120148
  • Position: Front
  • Splines gearbox side: 23
  • Splines wheel side: 30
  • Total length: 654 mm
  • Joint diameter: 76 mm
Item no.:3187358
  • Position: Front
  • Splines gearbox side: 23
  • Splines wheel side: 30
  • Total length: 708 mm
Item no.:3186076
  • Position: Front
  • Splines gearbox side: 23
  • Splines wheel side: 30
  • Total length: 695 mm
  • Joint diameter: 79 mm
Item no.:3185541
  • Position: Front
  • Splines gearbox side: 25
  • Splines wheel side: 30
  • Total length: 691 mm
  • Joint diameter: 90 mm
Item no.:3486097
  • Position: Inner
  • Inner splines: 22
  • Outer diameter: 76 mm
Item no.:0924101
  • Inner diameter: 30 mm
  • Outer diameter: 50 mm
Item no.:0687012
  • Total length: 102 mm
Item no.:0947616
  • Inner diameter: 32 mm
  • Outer diameter: 52 mm
Item no.:0996254
  • Inner diameter: 30 mm
  • Outer diameter: 50 mm
Item no.:0661353
  • Total length: 89 mm
Item no.:0646295
  • Total length: 86 mm
Item no.:0999053
  • Inner diameter: 35 mm
  • Outer diameter: 67 mm
Item no.:3460464
  • Position: Inner
  • Inner splines: 23
  • Outer diameter: 79 mm
Item no.:313120
  • Position: Front
  • Splines gearbox side: 23
  • Splines wheel side: 30
  • Total length: 658 mm
  • Joint diameter: 80 mm
Item no.:315634
  • Position: Front
  • Splines gearbox side: 23
  • Splines wheel side: 30
  • Total length: 653 mm
  • Joint diameter: 80 mm
Item no.:319226
  • Position: Front
  • Splines gearbox side: 23
  • Splines wheel side: 30
  • Total length: 651 mm
  • Joint diameter: 82 mm
Item no.:3448566
  • Position: Inner
  • Inner splines: 25
  • Outer diameter: 89 mm
Item no.:314744
  • Position: Front
  • Splines gearbox side: 25
  • Splines wheel side: 30
  • Total length: 690 mm
  • Joint diameter: 90 mm
Item no.:315868
  • Position: Front
Item no.:314835
  • Position: Front
  • Splines gearbox side: 23
  • Splines wheel side: 30
  • Total length: 654 mm
  • Joint diameter: 76 mm

Drivetrain for Subaru Leone II Estate

The Subaru Leone II Estate is an iconic model renowned for its robustness and ability to tackle demanding road conditions, largely thanks to its advanced drivetrain system. The drivetrain is the heart of the car's ability to deliver power from the engine to the wheels, and for a vehicle of this vintage, maintaining these components is vital to preserve reliability. The power transmission in a Leone II is engineered to withstand heavy loads, but over time, moving parts such as drive shafts and CV joints are subject to natural wear and tear. Investing in the correct spare parts is not merely a matter of function, but also of safety and driving enjoyment. At CVJoint24, we understand the technical nuances of this specific model and supply parts that satisfy the high standards expected of a Subaru. By focusing on quality-assured components, we help you prolong the lifespan of your vehicle and ensure power reaches the road without losses or unwanted noises.

How the drivetrain is designed on the Subaru Leone II Estate

The drivetrain layout on the Subaru Leone II Estate is a prime example of Japanese engineering, focusing on balance and efficiency. The model uses a longitudinal engine placement, allowing for a symmetrical layout of the drive shafts. Depending on whether your car is front-wheel drive or equipped with four-wheel drive, the system consists of front drive shafts delivering torque to the front wheels. For four-wheel drive variants, a propeller shaft and rear driveshafts are added. Each drive shaft is fitted with two joints: an inner CV joint positioned closest to the gearbox or differential, and an outer CV joint at the wheel hub. These joints allow the wheels to move up and down with the suspension while steering, all whilst transferring continuous power. Inner constant velocity joints are typically designed to accommodate axial plunge, whereas outer joints accommodate the wide angles required when steering. Understanding this complex interplay is essential when identifying where a driveline fault has arisen.

Common faults and symptoms

There are several distinct signs that the drivetrain on your Subaru Leone II Estate is wearing out. One of the most classic symptoms is a clicking or knocking noise when cornering on full lock at low speeds. This usually indicates that an outer CV joint is failing, often caused by a split CV boot that has allowed dirt to enter and grease to escape. If you instead experience vibrations throughout the car under acceleration, it may point to an inner CV joint or an unbalanced or damaged drive shaft. Another common symptom is grease or oil splattered across the inside of the wheel rim or underneath the car, which points to a torn CV joint boot. If left unaddressed, the lack of lubrication will swiftly cause complete joint failure. It is important to act at the first sign of noise or vibration to prevent consequential damage to the gearbox or wheel bearings, which can prove substantially more costly to repair.

Common parts to replace on the Subaru Leone II Estate

When it is time to repair your Subaru Leone II Estate, certain components require replacement more frequently than others. In our range, you will find a broad selection tailored to this exact model. We currently stock several drive shaft variants, covering most Leone II configurations. In addition, we offer 1 specific outer CV joint for the Subaru Leone II Estate, optimised to withstand the heavy loads imposed by steering and suspension movement. For the inboard driveline, we supply 2 types of inner CV joint for the Subaru Leone II Estate. Replacing a complete drive shaft can often be more time-efficient than overhauling an individual joint, especially if the original shaft suffers from surface corrosion or mechanical distortion. By selecting the correct part from the outset, you ensure your Subaru retains its legendary roadholding and stability whatever the weather.

How to find the right part for the Subaru Leone II Estate

Navigate directly to the relevant subcategory for your Subaru Leone II Estate:

When diagnosing drivetrain issues, it is best practice to begin in the correct category straight away. By comparing the specific product groups for the Subaru Leone II Estate, you can quickly distinguish between drive shaft, CV joint, or prop shaft faults and proceed to the section that best matches your symptoms and fitment requirements.

By browsing these links, you can inspect detailed technical specifications and dimensions to verify your choice before ordering. Our system is designed to minimise fitment errors and ensure complete confidence in your purchase.

Why buy from CVJoint24?

CVJoint24 is the international shop of a Swedish driveline specialist, supplying high-quality transmission and driveline components across the EU from our central warehouse in Helsingborg, Sweden. We combine in-depth technical expertise with a specialised range that few can rival, particularly for classic models like the Subaru Leone II Estate. When you purchase from us, you receive not only top-tier spare parts, but also the reassurance of our accurate fitment standards. We understand the importance of minimising vehicle downtime and dispatch stocked items rapidly. Our aim is to make it easy to select the right part the first time without hassle. By working closely with quality-verified manufacturers, we deliver durable components built to perform mile after mile. Turn to a dedicated specialist who understands your car's requirements and provides driveline parts built to last.

Frequently Asked Questions about Subaru Leone II Estate Drivetrain Parts

How do I know whether I need an inner or outer CV joint for my Subaru Leone II?

A worn outer CV joint usually produces a clicking noise when cornering, whereas a failing inner CV joint typically causes vibrations through the car under acceleration.

Can I replace just the CV boot if the joint is still functioning?

Yes, if you catch a split boot early and the joint has not started making noises or been contaminated by dirt, replacing the CV boot and repacking it with fresh grease is often sufficient.

Does the same drive shaft fit both front-wheel drive and four-wheel drive Leone II models?

No, there can be differences in length and splines depending on the drive layout. Always select your specific make, model and engine variant to ensure exact compatibility.

What is included when I purchase an outer CV joint from you?

Our CV joints are typically supplied as complete kits containing the joint, CV boot, grease, clamps and, where required, circlips and axle nuts.

How quickly are the parts for my Subaru delivered?

We dispatch quickly across Europe from our Swedish central warehouse in Helsingborg, helping you get your Subaru Leone II Estate back on the road without unnecessary delay.

Does your fitment guarantee apply when I select my car's details?

Yes, our fitment guarantee applies whenever you select your car's make, model and engine variant, giving you complete peace of mind when ordering.