Toyota IQ

Spare parts and drivetrain components for the Toyota IQ.

Products for Toyota IQ

21 products
1 - 21 of 21
Item no.:1132491
  • Position: Front left
  • Splines gearbox side: 23
  • Splines wheel side: 24
  • Total length: 903 mm
Item no.:1130451
  • Position: Front left
  • Splines gearbox side: 23
  • Splines wheel side: 24
  • Total length: 646 mm
Item no.:2104922
  • Position: Front right
  • Splines gearbox side: 23
  • Splines wheel side: 24
  • Total length: 900 mm
Item no.:0628693
  • Outer diameter: 19 mm
  • Diameter: 69 mm
Item no.:0608613
  • Outer diameter: 23 mm
  • Diameter: 73 mm
Item no.:142485
  • Position: Inner
  • Inner splines: 25
  • Seal diameter: 35 mm
  • Total length: 182 mm
  • Joint diameter: 86 mm
Item no.:0942239
  • Inner diameter: 34 mm
  • Outer diameter: 56 mm
Item no.:0982255
  • Inner diameter: 34 mm
  • Outer diameter: 545 mm
Item no.:0945212
  • Inner diameter: 34 mm
  • Outer diameter: 63 mm
Item no.:355244
  • Position: Outer
  • Inner splines: 25
  • Seal diameter: 55,6 mm
  • Outer splines: 26
  • Thread size: M22X1,5
Item no.:2196803
  • Position: Front right
  • Splines gearbox side: 23
  • Splines wheel side: 26
  • Total length: 906 mm
Item no.:1113691
  • Position: Front left
  • Splines gearbox side: 23
  • Splines wheel side: 26
  • Total length: 650 mm
Item no.:1184179
  • Position: Front left
  • Splines wheel side: 21
  • Total length: 639,5 mm
Item no.:357668
  • Position: Front, Outer
  • Inner splines: 20
  • Splines wheel side: 24
  • Seal diameter: 49,5 mm
  • Thread size: M22X1,5
Item no.:1167301
  • Position: Front left
  • Splines gearbox side: 23
  • Splines wheel side: 24
  • Total length: 650 mm
Item no.:352871
  • Position: Front, Outer
  • Inner splines: 29
  • Splines wheel side: 26
  • Seal diameter: 55 mm
  • Outer diameter: 77 mm
Item no.:0678587
  • Total length: 105 mm
Item no.:0961693
  • Inner diameter: 35 mm
  • Outer diameter: 63 mm
Item no.:349824
  • Position: Front, Inner
  • Inner splines: 29
  • Splines gearbox side: 23
  • Seal diameter: 34 mm
  • Outer diameter: 72 mm
Item no.:0637467
  • Total length: 99 mm
Item no.:0943731
  • Inner diameter: 34 mm
  • Outer diameter: 54 mm

Toyota IQ drivetrain

The Toyota IQ is an ingenious city car where every millimetre has been optimised to create maximum space within a minimal footprint. This places unique demands on the car's drivetrain, which must be both exceptionally compact and efficient. The power transmission in a Toyota IQ is engineered to handle the challenges of stop-start urban traffic while delivering a stable driving experience on open roads. Maintaining the drivetrain is vital to preserve the car's characteristic agility and fuel efficiency.

Here at CVJoint24, you will find the specific components required to keep your Toyota IQ in peak condition. We understand the technical nuances of this model and supply parts that meet the high precision standards demanded by its clever packaging. By choosing the right spare parts for your drivetrain, you ensure that engine power reaches the road without unwanted friction or vibration, substantially extending your car's service life.

How the Toyota IQ drivetrain works

The drivetrain on the Toyota IQ is a front-wheel-drive layout where the engine and gearbox are packaged tightly to occupy as little space as possible. This setup requires drive shafts with precise lengths and joint angles to achieve the remarkably tight turning circle for which the model is famed. Power travels from the gearbox via the drive shafts to the front wheels. Each drive shaft is fitted with inner and outer CV joints, allowing the wheels to move vertically over road bumps and turn horizontally for steering.

Because the Toyota IQ has such a short wheelbase and compact track width, the tolerances within the driveline are extremely tight. Even minor discrepancies in balance or fitment can cause noticeable cabin vibrations. The power transmission components are therefore designed to be lightweight yet robust enough to handle engine torque. Understanding this architecture is key to spotting when a part needs replacing before secondary damage spreads across the assembly.

Common faults and symptoms

One of the most frequent indicators of drivetrain trouble in a Toyota IQ is a clicking or knocking noise when taking sharp corners at low speeds. This symptom typically points to a worn outer CV joint, often triggered by a split boot that has allowed road grime in and grease out. If you experience vibrations through the steering wheel or car floor during acceleration, an imbalanced inner constant velocity joint or drive shaft is the likely cause.

Other symptoms to watch out for include gear oil leaks near the gearbox seals or grease splatters across the inner face of the road wheels. Grease on the wheel rims is a telltale sign of a torn CV boot, which rapidly leads to joint failure through lubricant starvation. Because the Toyota IQ spends much of its life negotiating tight urban bends, its constant velocity joints work hard; regular visual checks are essential to prevent costly repairs.

Common parts to replace on the Toyota IQ

The core component to monitor on this vehicle is the drive shaft. A complete replacement driveshaft is often the smartest and most cost-effective solution when wear appears, ensuring brand-new inner and outer joints as well as fresh CV boots. Replacing the entire shaft eliminates the risk of an old, fatigued component causing premature failure in a newly fitted part, giving you a lasting, reliable repair.

Alongside complete drive shafts, the CV joint boots are critical protective elements. They shield precision-machined joints from water, road salt and grit. Our range prioritises hard-wearing materials built to withstand challenging European winters and the continuous stresses of city driving. Proactively replacing worn components in your car's power transmission is an investment in safety and comfort that helps preserve your vehicle's resale value.

How to find the correct parts for your Toyota IQ

Browse directly to the relevant subcategory for your Toyota IQ:

On a vehicle where drivetrain issues can produce similar symptoms, navigating straight to the right subcategory saves valuable time. By comparing the exact component sections for the Toyota IQ, you can easily distinguish between drive shaft, CV joint or propeller shaft components and proceed to the page that matches your car's symptoms and fitment.

Selecting your parts by vehicle model helps prevent incorrect orders. If you are unsure which side of the vehicle requires a new component or need technical guidance, our expert team is on hand to help. We are dedicated to ensuring you get the exact match for your car's precise specifications.

Why buy from CVJoint24?

CVJoint24 is the international shop of a Swedish driveline specialist, meaning we possess deeper technical knowledge and a more focused catalogue than general car parts retailers. We put build quality and exact fitment first, knowing how crucial precise tolerances are to a smooth-running drivetrain. When you buy from us, you receive components carefully selected to match or exceed original equipment standards for your Toyota IQ.

Our strength lies in our dedication to driveline engineering. By focusing exclusively on driveline assemblies, we offer technical advice that resolves mechanical issues swiftly and reliably. Simply select your car's make, model and engine variant to find the exact parts you need. We combine specialist know-how with swift EU-wide dispatch to deliver a seamless shopping experience for all your replacement drivetrain parts.

Frequently Asked Questions about Toyota IQ - Drivetrain & Spare Parts

How do I know if the drive shaft on my Toyota IQ needs replacing?

The most common signs are clicking noises when cornering, vibrations during acceleration, or visible damage and grease leaks from the CV boots.

Do all drive shafts fit every Toyota IQ model?

No, there can be differences depending on the engine and gearbox. Always select your vehicle make, model and engine to find the exact part you need.

Why is exact fitment so important specifically for the Toyota IQ?

Because the Toyota IQ is an exceptionally compact car with tight tolerances in the drivetrain, even minor deviations in fitment can lead to vibrations and imbalance.

Can I replace just the CV joint, or do I need to replace the complete drive shaft?

It depends on the extent of the damage, but on the Toyota IQ it is often more cost-effective and dependable to replace the complete drive shaft to ensure reliable, long-term performance.

What causes a CV joint to fail on a city car like the IQ?

It is most frequently caused by a split CV boot letting in dirt and moisture, combined with the heavy loads created by frequent tight turns in urban driving.

How often should I inspect the drivetrain on my Toyota IQ?

We recommend a visual inspection of the boots and joints during every service or tyre change to catch any tears or cracks early.