Toyota Kluger

Welcome to cvjoint24.com, your Swedish driveline specialist for Toyota Kluger parts. Maintaining your drivetrain is critical for safety and smooth performance. We stock an extensive...

Products for Toyota Kluger

15 products
1 - 15 of 15
Item no.:113610
  • Position: Front left
  • Splines gearbox side: 24
  • Splines wheel side: 30
  • Total length: 675 mm
  • ABS teeth: 48
Item no.:140800
  • Position: Inner
  • Inner splines: 27
  • Seal diameter: 50 mm
  • Total length: 177 mm
  • Joint diameter: 85 mm
Item no.:248133
  • Position: Inner
  • Inner splines: 27
  • Seal diameter: 40 mm
  • Joint diameter: 85 mm
  • Outer splines: 24
Item no.:242015
  • Position: Inner
  • Inner splines: 23
  • Seal diameter: 35 mm
  • Total length: 178 mm
  • Joint diameter: 85 mm
Item no.:148723
  • Position: Inner
  • Inner splines: 26
  • Seal diameter: 50 mm
  • Total length: 177 mm
  • Joint diameter: 85 mm
Item no.:247223
  • Position: Inner
  • Inner splines: 27
  • Total length: 33 mm
  • Joint diameter: 111 mm
Item no.:456353
  • Position: Rear, Outer
  • Inner splines: 26
  • Splines wheel side: 26
  • Total length: 164 mm
  • ABS teeth: 48
Item no.:352024
  • Position: Outer
  • Inner splines: 26
  • Seal diameter: 61 mm
  • Outer splines: 30
  • ABS teeth: 48
Item no.:359182
  • Position: Outer
  • Inner splines: 34
  • Splines wheel side: 30
  • Seal diameter: 61 mm
  • ABS teeth: 48
Item no.:451933
  • Position: Rear, Outer
  • Inner splines: 23
  • Splines wheel side: 26
  • ABS teeth: 48
Item no.:257154
  • Position: Outer
  • Inner splines: 27
  • Seal diameter: 61,2 mm
  • Outer splines: 30
  • ABS teeth: 48
Item no.:622177
  • Total length: 35 mm
  • Diameter: 22 mm
Item no.:629769
  • Position: Rear
  • Total length: 2,248 mm
  • Outer diameter 1: 46 mm
  • Bolt circle diameter 1: 84,85 mm
  • Outer diameter 2: 38 mm
Item no.:624566
  • Position: Rear
  • Total length: 1,612 mm

Toyota Kluger Drivetrain

The Toyota Kluger is a robust and dependable SUV that demands components of the highest quality to maintain its performance. The drivetrain is central to your car's ability to drive smoothly, and every single component plays a vital role in transferring engine power to the road. As driveline specialists, we understand the exact requirements of a Toyota Kluger, whether driven on demanding terrain or cruising along the motorway. Our product range is carefully curated to ensure maximum durability and precise fitment. By investing in the correct parts from the start, you protect your vehicle's lifespan while safeguarding your driving comfort and safety. We are proud to be a Swedish driveline specialist offering the expertise needed to keep your Toyota in prime condition for years to come.

How the Toyota Kluger drivetrain is engineered

Power transmission in a Toyota Kluger is a feat of engineering where all components must work together seamlessly. The system starts at the engine and gearbox, where torque is distributed. On front-wheel-drive models, power is delivered directly via a drive shaft for Toyota Kluger to the front wheels. On all-wheel-drive models, the arrangement is more complex, featuring a transfer case that directs power rearwards via a propeller shaft. This shaft is typically split and requires a sturdy centre bearing to minimise vibrations and imbalance. Both inner and outer CV joints allow the wheels to move with the suspension and steer while continuously receiving torque. The inner constant velocity joint primarily absorbs the axial movement created as the suspension works, whilst the outer CV joint enables the wide angles required for steering. Keeping these components in good order is essential for proper vehicle dynamics.

Common faults and symptoms

Ignoring early warning signs from the drivetrain can lead to expensive repairs and potentially leave you stranded. One of the most classic signs of wear is a rhythmic clicking noise heard when cornering sharply, which almost always points to a worn outer CV joint on your Toyota Kluger. If you feel the car shudder or vibrate, particularly during acceleration between 40 and 80 km/h, play has often developed in an inner CV joint for Toyota Kluger. For AWD owners, a low rumbling drone or seat vibrations can suggest that a propeller shaft centre bearing has deteriorated or that the prop shaft has lost balance. It is equally important to inspect the CV boots regularly; a small split quickly lets road grime enter and destroy the precision-machined bearing surfaces inside the joint, making replacement inevitable.

Common replacement parts for Toyota Kluger

When it is time to replace components on your Toyota Kluger, knowing the available options is essential. We supply everything from individual joints to complete shaft assemblies. Here are the most frequently requested categories for this vehicle:

  • Drive shafts for Toyota Kluger
  • Outer CV joints for Toyota Kluger
  • Inner CV joints for Toyota Kluger
  • Propeller shafts for Toyota Kluger
  • Propeller shaft centre bearings for Toyota Kluger

By selecting the appropriate category from our menu, you can view the exact components available for your specific Toyota Kluger configuration. We stock parts for both front-wheel-drive and all-wheel-drive models, ensuring you always get what you need to restore your car's original performance and driveability.

How to find the right part for your Toyota Kluger

Select the correct section for your Toyota Kluger:

When diagnosing drivetrain problems, starting in the right category saves time. By comparing the exact sections for Toyota Kluger, it becomes straightforward to identify whether the issue lies with a drive shaft, CV joint or propeller shaft, and proceed to the part that matches your symptoms and fitment.

Finding the right car parts is simple with the right tools. At cvjoint24.com, we have streamlined the process so you can locate the correct part for your Toyota Kluger in seconds. Simply select your car's make, model and engine variant to match your vehicle's technical specifications directly with our catalogue. This eliminates any uncertainty about whether a propeller shaft for Toyota Kluger suits your specific model year, or whether the spline count on a CV joint matches. We back our recommendations with an accurate fitment guarantee. If you have any technical questions or need guidance on specifications, our experienced support team is on hand to help you pick the right parts straight away.

Why buy from cvjoint24.com?

Choosing cvjoint24.com means choosing confidence, expertise and premium quality. As a dedicated driveline specialist, our focus goes beyond standard aftermarket supply. We know your Toyota Kluger is an integral part of your daily routine and demands spare parts you can depend on in all driving conditions. All orders ship directly across Europe from our central warehouse in Helsingborg, Sweden, ensuring fast and reliable dispatch to minimise your vehicle's downtime. We partner exclusively with proven manufacturers to guarantee that every component satisfies rigorous standards. By combining an extensive range with professional customer service, our goal is always clear: delivering the right parts, quickly and reliably, backed by specialist drivetrain expertise.

Frequently Asked Questions about Drivetrain Parts for Toyota Kluger

How do I know if the CV joint on my Toyota Kluger is worn or damaged?

The most common symptom is a clicking noise when turning sharply. Vibrations during acceleration can also indicate wear in the inner CV joint.

Can I replace just the CV boot, or does the entire CV joint need to be replaced?

If you spot a split CV boot early before dirt has entered, replacing just the boot and regreasing the joint may be sufficient. If noises are already present, the joint must be replaced.

Why does my Toyota Kluger vibrate under acceleration?

Vibrations under load are often caused by wear in the inner CV joints or an imbalance in the propeller shaft on AWD models.

Do all drive shafts fit all Toyota Kluger models?

No, specifications vary depending on the engine, gearbox and model year. Always select your vehicle's make, model and engine to ensure the correct fit.

What is the difference between an inner and an outer CV joint?

The outer joint sits at the wheel and accommodates steering angles, whilst the inner joint sits at the gearbox and accommodates suspension movement.

How quickly do you dispatch parts for the Toyota Kluger?

We normally dispatch your parts the same day the order is placed, ensuring fast delivery directly from our Swedish warehouse.