Toyota RAV 4

Spare parts and drivetrain components for the Toyota RAV 4.

Products for Toyota RAV 4

160 products
97 - 120 of 160
Item no.:357465
  • Position: Front, Outer
  • Inner splines: 23
  • Seal diameter: 58 mm
  • Outer splines: 26
  • Thread size: M22X1,5
Item no.:353006
  • Position: Front, Outer
  • Inner splines: 24
  • Seal diameter: 58 mm
  • Outer splines: 26
  • ABS teeth: 48
Item no.:359913
  • Position: Front, Outer
  • Inner splines: 24
  • Seal diameter: 56 mm
  • Outer splines: 26
  • Joint diameter: 84 mm
Item no.:348131
  • Position: Inner
  • Inner splines: 23
  • Seal diameter: 36 mm
  • Total length: 167 mm
  • Joint diameter: 88 mm
Item no.:416422
  • Position: Rear
  • Splines gearbox side: 20
  • Splines wheel side: 26
  • Total length: 813 mm
  • Joint diameter: 68 mm
Item no.:650539
  • Position: Rear, Outer
  • Inner splines: 19
  • Splines wheel side: 26
  • Total length: 144 mm
Item no.:110485
  • Position: Front left
  • Splines gearbox side: 24
  • Splines wheel side: 26
  • Total length: 664 mm
Item no.:210762
  • Position: Front right
  • Splines gearbox side: 20
  • Splines wheel side: 26
  • Total length: 953 mm
Item no.:0810143
  • Inner diameter: 25 mm
  • Bearing thickness: 12 mm
  • Hole spacing c/c: 170 mm
Item no.:241360
  • Position: Inner
  • Inner splines: 27
  • Seal diameter: 40 mm
  • Joint diameter: 85 mm
  • Outer splines: 24
Item no.:240945
  • Position: Inner
  • Inner splines: 23
  • Seal diameter: 35 mm
  • Total length: 178 mm
  • Joint diameter: 85 mm
Item no.:148774
  • Position: Inner
  • Inner splines: 27
  • Seal diameter: 50 mm
  • Total length: 194 mm
  • Joint diameter: 86 mm
Item no.:342023
  • Position: Inner
  • Inner splines: 20
  • Total length: 88,5 mm
  • Joint diameter: 69 mm
Item no.:143916
  • Position: Inner
  • Inner splines: 27
  • Seal diameter: 50 mm
  • Total length: 177 mm
  • Joint diameter: 85 mm
Item no.:644592
  • Position: Rear right, Inner
  • Inner splines: 18
  • Splines gearbox side: 20
  • Seal diameter: 37 mm
  • Outer diameter: 67 mm
Item no.:337965
  • ABS teeth: 48
  • Inner diameter: 70 mm
  • Outer diameter: 80 mm
  • Width: 9 mm
Item no.:621450
  • Position: Rear
  • Total length: 1,966 mm
  • Number of joints: 2
  • Outer diameter 1: 46 mm
  • Bolt circle diameter 1: 84,8 mm
Item no.:0683444
  • Total length: 96 mm
Item no.:244579
  • Position: Inner
  • Inner splines: 27
  • Seal diameter: 34 mm
  • Total length: 516 mm
  • Joint diameter: 78 mm
Item no.:146240
  • Position: Inner
  • Inner splines: 27
  • Seal diameter: 50 mm
  • Total length: 170,5 mm
  • Joint diameter: 78 mm
Item no.:629225
  • Total length: 58 mm
  • Diameter: 22 mm
Item no.:410674
  • Position: Rear left
  • Splines wheel side: 26
  • Total length: 645 mm
  • Joint diameter: 82 mm
  • ABS teeth: 48
Item no.:518376
  • Position: Rear right
  • Splines wheel side: 26
  • Total length: 690 mm
  • Joint diameter: 82 mm
  • ABS teeth: 48
Item no.:459520
  • Position: Rear, Outer
  • Inner splines: 18
  • Splines wheel side: 26
Showing 97–120 of 160 products

Drivetrain for Toyota RAV 4

The Toyota RAV 4 is renowned for its reliability and versatility, but just like any vehicle, its drivetrain requires regular maintenance and the occasional replacement of wear parts. As a dedicated driveline specialist, we offer an in-depth range tailored specifically to this model. With an extensive inventory, we cover the most critical power transmission requirements. Selecting the correct components is not merely a matter of function, but also of safety and driving comfort. A properly functioning drivetrain minimises vibrations and ensures engine power reaches the wheels efficiently, which is particularly vital for a vehicle driven across varied road conditions.

How the drivetrain is engineered on the Toyota RAV 4

The drivetrain on a Toyota RAV 4 is designed to handle both urban driving and light off-road terrain. Power is produced by the engine and routed through the gearbox to the wheels. On front-wheel-drive models, this is delivered via a drive shaft for the Toyota RAV 4 on each side at the front. For the popular all-wheel-drive versions (AWD), a transfer box sends drive to the rear via a Toyota RAV 4 propeller shaft. It is a complex system involving multiple joints and shafts that must operate in absolute harmony. Every component, from the smallest circlip to the longest shaft, plays a decisive role in the vehicle's overall handling and stability.

Common faults and symptoms

There are several distinct signs that a driveline component on your Toyota RAV 4 is starting to fail. One of the most frequent symptoms is a clicking or knocking sound on full steering lock, which typically indicates a worn outer CV joint on your Toyota RAV 4. Vibrations under acceleration often point to worn inner joints or the drive shaft itself. If you experience vibrations that persist regardless of acceleration, the prop shaft or its centre bearing may require attention. Furthermore, a cracked Toyota RAV 4 ABS ring can send erratic signals to the braking system, frequently causing the ABS warning light to illuminate on the dashboard.

Common parts to replace on the Toyota RAV 4

Based on our data and specialist experience, certain components require replacement more often on this model. Our range for the Toyota RAV 4 currently includes the following categories:

  • Drive shafts (19 items): Complete shafts for both front and rear axles that eliminate imbalance and wear issues.
  • Outer CV joints (9 items): The most common wear component, frequently damaged if the CV boot splits.
  • Propeller shafts (6 items): Essential for AWD models to eradicate chassis vibrations.
  • ABS rings (3 items): A cost-effective fix to restore the ABS without replacing the complete CV joint.
By focusing on these specific areas, we ensure you find exactly what is required for your repair.

How to find the right part for your Toyota RAV 4

Navigate directly to the relevant category for your Toyota RAV 4:

On a vehicle with several possible driveline issues, it is best to start in the correct category right away. Comparing the specific subcategories for the Toyota RAV 4 makes it easier to distinguish between drive shaft, CV joint or propeller shaft faults, taking you straight to the page that matches your symptoms and fitment.

Navigating different technical specifications can be tricky. To guarantee you receive a part with the correct fitment, we strongly recommend filtering by your car's make, model and engine variant. As the Toyota RAV 4 has been manufactured across multiple generations with different driveline configurations, details such as spline counts on a constant velocity joint or driveshaft length can vary significantly. By selecting your specific vehicle details, our catalogue filters the range so that only parts verified for your car are displayed. This eliminates purchasing errors and saves time during fitting, giving you confidence that the replacement matches original specifications.

Why buy from CVJoint24?

CVJoint24 is the international shop of a Swedish driveline specialist, focusing on depth and technical precision in power transmission parts. Rather than acting as a generic auto-parts store, we are dedicated driveline experts. This enables us to provide specialised technical support and a range that few competitors can match. When you order from us, you get carefully selected car parts manufactured to exacting quality standards, backed by a Swedish specialist dispatching across the EU. Our passion for driveline engineering means we understand your technical challenges, and we are here to help your Toyota RAV 4 travel reliably for many kilometres to come.

Frequently Asked Questions about Drivetrain Parts for Toyota RAV 4 – High-Quality Spare Parts

How do I know if my Toyota RAV 4 needs a new outer CV joint?

The most common symptom is a rhythmic clicking noise heard when turning sharply at low speeds. If the noise disappears when driving straight ahead, it is almost certainly a worn outer CV joint.

Do all drive shafts fit every Toyota RAV 4 model?

No, drive shafts vary depending on the model year, engine variant, and whether the vehicle is front-wheel drive or all-wheel drive. Always select your vehicle's make, model, and engine in our selector to ensure you get the right part.

Why does my car vibrate under acceleration?

Vibrations during acceleration in a Toyota RAV 4 are often caused by worn inner CV joints or an out-of-balance drive shaft. It can also stem from issues with the propeller shaft if the car is all-wheel drive.

Can I replace just the ABS ring on my Toyota RAV 4?

Yes, if your CV joint is otherwise in good condition but the ABS ring has cracked or corroded, you can replace just the ring. It is a much more cost-effective solution than replacing the complete joint.

What is the difference between a drive shaft and a propeller shaft?

The drive shafts are fitted between the gearbox/differential and the wheels. The propeller shaft is only found on all-wheel-drive RAV 4 models, transferring power longitudinally down the vehicle from the front to the rear axle.

How many drivetrain products do you offer for Toyota RAV 4?

We currently stock 37 specifically matched items for the Toyota RAV 4, including drive shafts, CV joints, propeller shafts, and ABS rings.