Toyota Tacoma

Welcome to your dedicated specialist for Toyota Tacoma drivetrain components. Backed by our Swedish driveline expertise, we understand what it takes to keep your pickup delivering its...

Products for Toyota Tacoma

29 products
1 - 24 of 29
Item no.:627728
  • Total length: 92 mm
  • Diameter: 27 mm
Item no.:690836
  • Position: Rear
Item no.:398218
  • Total length: 82 mm
  • Diameter: 27 mm
Item no.:0967158
  • Inner diameter: 46 mm
  • Outer diameter: 80 mm
Item no.:0921206
  • Inner diameter: 57 mm
  • Outer diameter: 75 mm
Item no.:0982619
  • Total length: 49 mm
  • Diameter: 29 mm
Item no.:0932391
  • Inner diameter: 46 mm
  • Outer diameter: 69 mm
Item no.:0859858
  • Inner diameter: 30 mm
  • Bearing thickness: 59 mm
  • Hole spacing c/c: 150 mm
  • Width: 59 mm
Item no.:0910903
  • Inner diameter: 49 mm
  • Outer diameter: 70 mm
Item no.:337486
  • Position: Front
  • Inner diameter: 40 mm
Item no.:0900950
  • Inner diameter: 39 mm
  • Outer diameter: 74 mm
Item no.:0973974
  • Inner diameter: 38 mm
  • Outer diameter: 74 mm
Item no.:0946256
  • Inner diameter: 41 mm
  • Outer diameter: 74 mm
Item no.:0907137
  • Inner diameter: 41 mm
  • Outer diameter: 61 mm
Item no.:0948650
  • Inner diameter: 40 mm
  • Outer diameter: 59 mm
Item no.:3545558
  • Position: Outer
  • Inner splines: 29
  • Splines wheel side: 30
  • Seal diameter: 70 mm
  • Outer diameter: 106 mm
Item no.:0954930
  • Inner diameter: 30 mm
  • Outer diameter: 45 mm
Item no.:0953846
  • Inner diameter: 32 mm
  • Outer diameter: 53 mm
Item no.:0639902
  • Total length: 124 mm
Item no.:0967834
  • Inner diameter: 41 mm
  • Outer diameter: 58 mm
Item no.:0936520
  • Inner diameter: 43 mm
  • Outer diameter: 88 mm
  • Height: 17 mm
Item no.:0950054
  • Inner diameter: 42 mm
  • Outer diameter: 58 mm
Showing 1–24 of 29 products

Toyota Tacoma Drivetrain

The Toyota Tacoma is renowned worldwide for its exceptional durability and ability to tackle demanding conditions. To maintain this level of performance, it is crucial that the vehicle's drivetrain is kept in peak condition. The transmission and driveline system are the heart of your pickup's capability, and every component from the gearbox to the wheel hubs plays a critical role. At CVJoint24, you will find a dedicated range tailored specifically to your Tacoma, engineered to meet the heavy demands placed on a modern pickup. We focus on components that do not simply fit precisely, but are also designed to withstand the stresses of heavy hauling and off-road driving. Choosing the right spare parts ensures your truck remains just as dependable as the day it left the factory, no matter how many kilometres are on the clock.

How the Toyota Tacoma drivetrain is engineered

The drivetrain layout on a Toyota Tacoma is rugged and purposeful, though it varies depending on whether the vehicle is rear-wheel drive or four-wheel drive. Central to the setup on most models is a long propeller shaft that transmits torque from the gearbox to the rear axle. Due to the length of the shaft and the truck's wheelbase, a centre bearing is frequently used on the Toyota Tacoma to stabilise rotation and minimise vibrations throughout the chassis. On 4WD models, a transfer box and front drive shafts are added. These driveshafts feature inner and outer CV joints that maintain smooth power delivery even as the front wheels steer and articulate over rough terrain. To protect these hard-working joints, CV boots are fitted to serve as an impenetrable barrier against grit, water, and salt. The entire assembly relies on a precise balance between strength and flexibility, where every component must work in harmony to prevent premature wear.

Common faults and symptoms

There are several telltale signs that driveline components on your Tacoma are nearing the end of their service life. One of the most frequent symptoms of a failing centre bearing is vibration travelling through the floorpan, especially noticeable under acceleration or within specific speed ranges between 40 and 80 km/h. A whining or grinding noise coming from beneath the cab can also point to a bearing that has lost its lubrication or suffered moisture ingress. Where the drive shafts are concerned, the flexible boots are usually the weakest link. If a CV boot splits, essential lubricating grease escapes while road dirt and water enter the constant velocity joint. A distinct clicking or knocking noise on full steering lock is a classic indicator that an outer CV joint is already worn. Ignoring these early warning signs can lead to severe component failure, potentially leaving you stranded mid-journey.

Common parts to replace on the Toyota Tacoma

To preserve the legendary reliability of your Toyota Tacoma, certain components require closer inspection than others. Based on our workshop experience and parts demand, items linked to the prop shaft and driveshaft protection are the most frequent candidates for replacement during the truck's working life. We keep extensive stock across these categories to ensure quick dispatch whenever repairs arise. Key parts for your truck's driveline include:

  • Propeller shaft centre bearings for Toyota Tacoma – Essential for eliminating driveline vibrations and protecting the prop shaft.
  • CV boots for Toyota Tacoma – The most effective, cost-efficient defence for your CV joints against dirt and corrosion.

By inspecting these assemblies during routine servicing, you can catch hairline cracks in a rubber boot or slight play in a centre bearing before secondary damage occurs. Replacing a worn boot in good time costs a fraction of the price of an entire replacement drive shaft later on. We ensure that all our car parts meet or exceed original equipment standards to deliver long-lasting durability.

How to find the right part for your Toyota Tacoma

Navigate to the specific part category for your Toyota Tacoma:

When troubleshooting driveline issues, starting in the precise subcategory saves valuable time. By comparing the targeted product sections for the Toyota Tacoma, it is straightforward to differentiate between drive shaft, CV joint, or prop shaft faults, allowing you to choose the exact parts that match your vehicle's symptoms and fitment.

Pinpointing the exact component for your Toyota Tacoma can occasionally be intricate, as specifications often vary across different production generations, engine configurations, and whether the vehicle sits at factory height or has been lifted. The most reliable way to locate compatible parts is to select your vehicle's make, model, and engine variant using our store selector. Our cataloguing system automatically narrows the catalogue down to verified parts for your specific vehicle setup. This avoids costly ordering mistakes and ensures the parts arrive with matching dimensions and mounting points straight out of the box. If your vehicle features aftermarket modifications, such as an off-road suspension lift, remember to check that replacement components accommodate the altered driveline angles. We always recommend a quick visual comparison with your existing unit before fitting to ensure complete peace of mind.

Why buy from CVJoint24?

CVJoint24 is the international webshop of a Swedish driveline specialist based in Helsingborg, Sweden, dedicated entirely to power transmission and drivetrain components. Unlike general automotive factors, we offer focused technical expertise and an uncompromising commitment to correct vehicle fitment. When sourcing parts for your Toyota Tacoma from us, you can trust our dedicated catalogue data and product vetting. We offer an exact-fit guarantee for complete purchasing confidence. We also know that workshop downtime needs to be kept to a minimum; that is why our streamlined European logistics dispatch stocked orders swiftly across the EU. Our mission is to deliver dependable, high-grade car parts that keep your pickup working without compromise. Discover the difference of ordering directly from a dedicated specialist.

Frequently asked questions about Toyota Tacoma drivetrain parts

How do I know if the centre bearing on my Toyota Tacoma needs replacing?

The most common symptoms are vibrations through the floorpan or seats, often between 40 and 80 km/h. You might also hear a grinding or whining noise coming from the propeller shaft beneath the vehicle.

Do your CV boots fit all model years of the Tacoma?

We stock CV boots for most model years, but it is essential to filter by your car's make, model and engine to ensure you get the exact size and specification for your vehicle.

What is included when I buy a CV boot for my Tacoma?

Our CV boot kits are normally supplied complete with the necessary retaining clips and specialised grease to ensure a proper, long-lasting installation from the start.

Can a worn centre bearing damage other components on my Toyota?

Yes, if vibrations from a failing centre bearing are left unattended, they can cause premature wear to both the gearbox output shaft and the rear differential.

Is it difficult to replace a CV boot yourself on a Tacoma?

It requires proper tools and some mechanical know-how, as the drive shaft usually has to be removed. It is well within reach for a competent DIY mechanic, but thorough cleaning and correct regreasing are critical.

How quickly can I receive my spare parts?

We offer fast delivery on all in-stock items, meaning you will usually receive your parts swiftly after placing your order.