Toyota Yaris

Spare parts and drivetrain components for the Toyota Yaris.

Products for Toyota Yaris

137 products
1 - 24 of 137
Item no.:1146066
  • Position: Front left
  • Splines gearbox side: 23
  • Splines wheel side: 26
  • Total length: 658 mm
  • Joint diameter: 85 mm
Item no.:7316775
  • Position: Front left
  • Splines gearbox side: 23
  • Splines wheel side: 26
  • Total length: 655 mm
Item no.:7316774
  • Position: Front left
  • Splines gearbox side: 23
  • Splines wheel side: 24
  • Total length: 652 mm
  • ABS teeth: 48
Item no.:2128796
  • Position: Front right
  • Splines gearbox side: 23
  • Splines wheel side: 26
  • Total length: 896 mm
  • Joint diameter: 85 mm
Item no.:256464
  • Position: Outer
  • Inner splines: 20
  • Splines wheel side: 26
Item no.:1114244
  • Position: Front left
  • Splines gearbox side: 20
  • Splines wheel side: 26
  • Total length: 629 mm
  • Joint diameter: 77 mm
Item no.:2145616
  • Position: Front right
  • Splines gearbox side: 20
  • Splines wheel side: 26
  • Total length: 914 mm
  • Joint diameter: 77 mm
Item no.:1197478
  • Position: Front left
  • Splines gearbox side: 23
  • Splines wheel side: 26
  • Total length: 670 mm
  • Joint diameter: 73 mm
Item no.:2142001
  • Position: Front right
  • Splines gearbox side: 23
  • Splines wheel side: 26
  • Total length: 885 mm
  • Joint diameter: 70 mm
Item no.:0491311
  • Position: Inner
  • Inner splines: 20
  • Splines gearbox side: 23
  • Seal diameter: 34 mm
  • Outer splines: 23
Item no.:0539466
  • Position: Outer
  • Inner splines: 20
  • Seal diameter: 56 mm
  • Outer splines: 26
  • Thread size: M22X1,5
Item no.:0513956
  • Position: Outer
  • Inner splines: 21
  • Splines wheel side: 26
  • Seal diameter: 55 mm
  • Outer splines: 26
Item no.:151575
  • Position: Outer
  • Inner splines: 23
  • Seal diameter: 55,5 mm
  • Outer splines: 26
  • Thread size: M22X1,5
Item no.:333105
  • ABS teeth: 48
  • Inner diameter: 70 mm
  • Outer diameter: 80 mm
  • Width: 9 mm
Item no.:0394393
  • Position: Front
  • ABS teeth: 48
  • Inner diameter: 70 mm
  • Outer diameter: 80 mm
  • Width: 9 mm
Item no.:0594025
  • Position: Outer
  • Inner splines: 26
  • Seal diameter: 58 mm
  • Outer splines: 24
  • ABS teeth: 48
Item no.:0571382
  • Position: Outer
  • Inner splines: 28
  • Splines wheel side: 24
  • Seal diameter: 56 mm
  • ABS teeth: 48
Item no.:140204
  • Position: Inner
  • Inner splines: 20
  • Splines gearbox side: 23
  • Total length: 91 mm
  • Inner diameter: 19 mm
Item no.:7308191
  • Position: Front right
  • Splines gearbox side: 23
  • Splines wheel side: 24
  • Total length: 868 mm
  • Joint diameter: 80 mm
Item no.:7308190
  • Position: Front right
  • Splines gearbox side: 23
  • Splines wheel side: 24
  • Total length: 864 mm
  • ABS teeth: 48
Item no.:0548622
  • Position: Outer
  • Inner splines: 19
  • Seal diameter: 58 mm
  • Outer splines: 24
  • ABS teeth: 48
Item no.:0664086
  • Outer diameter: 21 mm
  • Diameter: 76 mm
Item no.:353746
  • Position: Outer
  • Inner splines: 22
  • Splines wheel side: 26
  • Seal diameter: 55 mm
  • Outer diameter: 83 mm
Item no.:652373
  • Position: Rear, Outer
  • Inner splines: 19
  • Splines wheel side: 26
  • Total length: 144 mm
Showing 1–24 of 137 products

Toyota Yaris drivetrain

The Toyota Yaris is renowned for its reliability and nimble handling, but like all front-wheel-drive cars, its drivetrain is subjected to significant stress during everyday driving. The drivetrain is the system that transfers power from the engine to the wheels, and for a compact car such as the Yaris, every component is optimised for efficiency and durability. With us, you will find a carefully selected range of parts ensuring your vehicle's power transmission performs flawlessly year after year. We understand the specific demands of this model and supply solutions that meet or exceed original standards to preserve the car's driving characteristics.

Maintaining the drivetrain is vital for both safety and motoring economy. A defective component can cause consequential damage to the gearbox or suspension if not addressed in good time. By choosing the right spare parts from a specialist, you ensure your Toyota Yaris remains as dependable as when it left the showroom. We have gathered the most relevant parts so you can easily find what you need, whether carrying out a routine repair or replacing wear items as a preventative measure.

How the Toyota Yaris drivetrain is constructed

The Toyota Yaris uses a classic front-wheel-drive layout with the engine and gearbox mounted transversely in the engine bay. Power travels from the gearbox via an inner CV joint to the drive shaft, and onwards through an outer CV joint to the wheel hub. This design requires immense flexibility to handle suspension travel and steering angles simultaneously whilst delivering torque. It is a compact, efficient system that saves both weight and space, which is central to the Yaris design philosophy.

Because the Yaris is frequently driven in urban conditions with constant stopping, starting and sharp turns, the outer joints in particular face continuous torque and large angular changes. The drive shafts are engineered to withstand these loads, but they rely entirely on intact CV boots to protect the precision bearings inside the joints. A healthy drivetrain on a Yaris is characterised by quiet running and vibration-free acceleration, the result of precision-engineered components working in perfect harmony.

Common faults and symptoms

One of the most frequent signs of drivetrain trouble on a Toyota Yaris is a clicking or knocking sound on full steering lock at low speeds. This noise almost always indicates a worn outer CV joint where the bearing balls have developed play. If you instead notice vibrations through the steering wheel or bodywork under acceleration, it typically points towards an inner constant velocity joint problem or an unbalanced drive shaft. These symptoms should be addressed promptly to prevent the component from failing completely while driving.

Another common issue, particularly on older Yaris models, is an illuminated ABS warning light. This is frequently caused by a cracked or corroded ABS ring. When the ring fractures, the clearance to the sensor changes and the control unit loses its signal. Inspecting these components regularly allows you to catch problems early. A visual check of the CV joint boots is equally essential; if they split, grease leaks out and abrasive dirt enters, rapidly destroying the joint.

Common parts to replace on the Toyota Yaris

To help your search, we have organised our range around the most frequent replacement needs for the Toyota Yaris:

  • Drive shaft for Toyota Yaris – Complete shafts for a fast, straightforward replacement.
  • Outer CV joint for Toyota Yaris – The most common wear item when clicking noises occur while turning.
  • Inner CV joint for Toyota Yaris – To cure vibrations under acceleration.
  • ABS ring for Toyota Yaris – The solution when the ABS system flags a wheel speed sensor fault.

These parts are tailored specifically to fit the various generations of the Yaris. By supplying both complete driveshafts and individual CV joints, we give you the flexibility to choose the most cost-effective solution for your repair. Our ABS rings are produced from corrosion-resistant materials that outperform original components, extending their service life in harsh European winters.

How to find the right part for your Toyota Yaris

Navigate directly to the appropriate section for the Toyota Yaris:

On a model with several potential drivetrain faults, starting in the right category makes all the difference. By comparing the exact component sections for the Toyota Yaris, you can easily distinguish between drive shaft, CV joint or propeller shaft issues and proceed to the page that best matches your symptoms and fitment.

Choosing the correct spare part for a Toyota Yaris can be tricky, as technical specifications vary depending on engine size, gearbox type and model year. Differences exist in shaft lengths as well as spline counts on the CV joints across different variants. The most reliable way to ensure compatibility is to select your vehicle by make, model and engine variant in our store. This filters the selection down to parts verified for your exact car.

Once you have identified the right category, it is always wise to double-check technical specifications such as external and internal spline counts where provided. This is especially helpful if the car has had previous modifications or if multiple technical revisions exist for the same model year. Our catalogue is structured to minimise the risk of incorrect orders, saving you both time and hassle. If you are unsure which component will resolve a particular symptom, you can always rely on our expert driveline knowledge.

Why shop with CVJoint24?

As a dedicated Swedish driveline specialist, we bring technical expertise that general car-parts retailers often lack. We focus exclusively on power transmission, giving us comprehensive in-depth knowledge of components such as drive shafts and CV joints for the Toyota Yaris. Our mission is to provide outstanding accuracy in fitment and quality, paired with customer service that truly understands the technical details behind every product. We know that receiving the correct part the first time is crucial for an efficient repair.

When you buy from us, you can trust that you are getting components built to withstand harsh conditions, salted winter roads and fluctuating temperatures. We combine an extensive stockholding with rapid dispatch from our Swedish warehouse across the EU, making us the natural choice for DIY mechanics and professional workshops alike. With an emphasis on precise specifications and high-grade materials, we help you keep your Toyota Yaris running safely and smoothly.

Frequently Asked Questions about Drivetrain Parts for Toyota Yaris

How do I know if my Toyota Yaris needs a new drive shaft?

The most common symptoms are heavy vibrations under acceleration or a persistent clunking noise from beneath the car. If a CV joint fails completely, the vehicle may lose drive entirely, making replacing the complete drive shaft the most practical solution.

Why is there a clicking noise when I turn in my Toyota Yaris?

A clicking noise when cornering is usually caused by a worn outer CV joint. It occurs when the bearings inside the joint wear down, often because a split CV boot has allowed dirt to enter or grease to escape.

Can I replace just the ABS ring on my Toyota Yaris?

Yes, on many Yaris models you can replace just the ABS ring if it has cracked or corroded, provided the constant velocity joint itself is still in good working order. This is a very cost-effective repair.

What is the difference between an inner and an outer CV joint?

The outer CV joint sits at the wheel hub and allows for steering movement, whilst the inner CV joint is located by the gearbox and primarily accommodates suspension travel. A failing outer joint typically causes noise when turning, whereas an inner joint problem creates vibrations.

How do I find the correct number of splines for my CV joint?

The easiest method is to select your car's make, model and engine variant. If several options exist for your model, we specify the tooth count in the product description so you can match it against your original part.

Are your Toyota Yaris drive shafts supplied complete?

Yes, our complete drive shafts are supplied fully assembled with both the inner and outer CV joints as well as the CV boots, ready to fit directly to the car to save repair time.