Vauxhall Cavalier MK II Saloon

Welcome to CVJoint24, your Swedish driveline specialist supplying quality parts for the Vauxhall Cavalier MK II Saloon across Europe. We understand the importance of precise fitment for...

Products for Vauxhall Cavalier MK II Saloon

9 products
1 - 9 of 9
Item no.:111735
  • Position: Front left
  • Splines gearbox side: 22
  • Splines wheel side: 22
  • Total length: 585 mm
  • Joint diameter: 81 mm
Item no.:215463
  • Position: Front right
  • Splines gearbox side: 22
  • Splines wheel side: 22
  • Total length: 920 mm
  • Joint diameter: 81 mm
Item no.:354192
  • Position: Outer
  • Inner splines: 22
  • Seal diameter: 52 mm
  • Outer splines: 22
  • Thread size: M20X1,5
Item no.:0418880
  • Position: Front, Inner
  • Inner splines: 22
  • Outer diameter: 84 mm
  • Splines wheel side: 22
Item no.:348138
  • Position: Front, Inner
  • Inner splines: 22
  • Seal diameter: 35 mm
  • Total length: 132,5 mm
  • Joint diameter: 81 mm
Item no.:344187
  • Position: Inner
  • Inner splines: 25
  • Seal diameter: 35 mm
  • Total length: 100 mm
  • Joint diameter: 92 mm
Item no.:0608946
  • Total length: 113 mm
Item no.:0693375
  • Outer diameter: 19 mm
  • Diameter: 76 mm
Item no.:340764
  • Position: Inner
  • Inner splines: 22
  • Seal diameter: 35 mm
  • Total length: 132,5 mm
  • Joint diameter: 81 mm

Drivetrain for Vauxhall Cavalier MK II Saloon

The Vauxhall Cavalier MK II Saloon is a classic model that requires specific components for optimal power transmission. As a specialist in All car makes, we offer a comprehensive range tailored specifically to this car model. Maintaining the drivetrain is vital for both driving comfort and safety. A well-functioning drivetrain ensures the engine's power reaches the wheels without energy loss or unwanted noises. At CVJoint24, we focus on providing parts that meet or exceed original specifications, which is particularly important for older vehicles where wear is often more extensive. By choosing the right parts, you extend the lifespan of your car and avoid costly secondary damage to the gearbox and suspension. Preserving a Vauxhall Cavalier MK II Saloon in original condition means refusing to compromise on spare part quality. The drivetrain is the heart of your vehicle's motion, and the slightest imbalance can lead to increased wear on other components, such as wheel bearings and engine mounts.

How the drivetrain is engineered on the Vauxhall Cavalier MK II Saloon

The drivetrain layout on a Vauxhall Cavalier MK II Saloon follows the traditional front-wheel-drive arrangement with a transverse engine. Power transfers from the gearbox via two drive shafts to the front wheels. Each drive shaft is fitted with an inner and an outer CV joint. The inner CV joint sits closest to the gearbox and accommodates axial movement as the suspension works, whilst the outer CV joint at the wheel enables steering. The entire setup is protected by rubber CV boots that retain lubricating grease and seal out dirt and moisture. As the Cavalier MK II is an older design, materials and tolerances are specific to this era. Inner CV joints on these models are often tripod joints, which offer a robust design but remain sensitive to lubrication loss. The outer joints are Rzeppa joints, which allow the sharp angles required for steering. Understanding how these components interact to transfer torque is essential for diagnosing issues accurately.

Common faults and symptoms

Several clear signs indicate that the drivetrain on your Vauxhall Cavalier MK II Saloon is wearing out. One of the most common symptoms is a clicking or knocking noise at full steering lock, which typically points to a worn outer CV joint. If you instead experience vibrations through the steering wheel or bodywork during acceleration, the inner CV joint is often the culprit. Another critical warning sign is grease splattered across the inside of the wheel rim or wheel arch, indicating a split boot. When a CV boot fails, the constant velocity joint is exposed to road grime and water, quickly leading to complete failure. Regularly inspecting your CV joint boots for cracks is therefore vital. Ignoring these symptoms can cause a driveshaft to snap, leaving the car stranded. Furthermore, extreme temperature shifts can cause boot rubber to harden and crack prematurely, leading to grease leakage and leaving the joint unprotected.

Common parts to replace on the Vauxhall Cavalier MK II Saloon

For this specific model, certain key components see recurring demand. Based on our data, drive shafts and inner joints are the most sought-after items to restore proper driveline operation. Here are the most relevant categories for your car:

  • Drive shafts for Vauxhall Cavalier MK II Saloon
  • Inner CV joints for Vauxhall Cavalier MK II Saloon
  • CV boots for Vauxhall Cavalier MK II Saloon
Replacing an entire drive shaft can often be more time-efficient than reconditioning individual joints, especially on higher-mileage vehicles. We offer two different variants of drive shafts and inner CV joints to cover the various engine options and model years across the MK II range. Access to the correct boots is also essential for preventive maintenance, as an inexpensive boot can save you substantial repair bills down the line.

How to find the right part for your Vauxhall Cavalier MK II Saloon

Select the relevant category for your Vauxhall Cavalier MK II Saloon:

When troubleshooting driveline issues, starting in the right category is essential. Comparing specific component sections for the Vauxhall Cavalier MK II Saloon makes it easier to pinpoint whether the issue lies with a drive shaft, CV joint or propeller shaft, directing you straight to the parts that match your symptoms and exact fitment.

Finding the correct replacement part for a classic like the Vauxhall Cavalier MK II Saloon can occasionally be tricky due to production changes over the years. The most reliable way to select the right part is to filter by your car's make, model and engine variant. This will narrow down the components engineered specifically for your vehicle. However, checking physical dimensions or spline counts on your old component is always recommended, as modifications may have occurred over the car's lifetime. Our specialist team possesses extensive experience with these models and is on hand to help you navigate our catalogue. Paying close attention to your gearbox type is especially important, as inner CV joints can vary between the manual and automatic gearboxes used across the MK II range.

Why shop at CVJoint24?

CVJoint24 is your dedicated partner for automotive power transmission. As an international shop backed by a Swedish driveline specialist, we combine specialist technical expertise with a focused catalogue that general parts suppliers struggle to match. Because we concentrate purely on drivetrain components, our fitment advice is exceptionally accurate. With our correct-part fitment guarantee, you can order with confidence and avoid unnecessary vehicle downtime. Most stocked items are dispatched quickly so you can get your car back on the road without delay. When shopping with us, you receive high-grade spare parts backed by specialists who understand the engineering behind your Vauxhall Cavalier MK II Saloon. We take pride in being the trusted destination for drivers across Europe seeking quality and dependability for their drivetrain.

Frequently asked questions about Drivetrain for Vauxhall Cavalier MK II Saloon

How do I know if my Vauxhall Cavalier MK II needs a new drive shaft?

The most common signs are heavy vibrations under acceleration or persistent front-end noises that do not disappear when cornering.

Can I replace just the CV boot if the joint is still working?

Yes, if you catch a split CV boot early and the joint has not started making noise, you can clean the joint, repack it with fresh grease and fit a new boot.

What tools are needed to replace an inner CV joint on a Cavalier?

You will typically need a socket set, a ball joint splitter, and specialist pliers to tension the CV boot clamps correctly.

Do the parts fit all engine variants of the MK II Saloon?

No, drive shafts and CV joints can vary depending on engine size and gearbox. Always select your vehicle's exact make, model and engine to ensure the correct fit.

What is the advantage of buying a complete drive shaft?

A complete drive shaft saves time during installation and eliminates the risk of old, worn components causing new issues shortly after the repair.

How quickly will parts be delivered for my Vauxhall?

We offer fast delivery across the EU for most of our 7 matching products for Vauxhall Cavalier MK II Saloon when in stock.