Vauxhall Insignia MK I Saloon

Welcome to CVJoint24, your Swedish driveline specialist for the Vauxhall Insignia MK I Saloon. We stock an extensive range of high-grade components designed to maintain your vehicle's...

Products for Vauxhall Insignia MK I Saloon

16 products
1 - 16 of 16
Item no.:316619
  • Position: Front right
  • Splines gearbox side: 27
  • Splines wheel side: 30
  • Total length: 614 mm
  • Joint diameter: 91 mm
Item no.:622616
  • Position: Rear
  • Total length: 2,310 mm
  • Number of joints: 4
  • Number of centre bearings: 2
Item no.:0449291
  • Position: Front, Inner
  • Inner splines: 26
  • Seal diameter: 35 mm
  • Total length: 161 mm
  • Outer splines: 26
Item no.:115842
  • Position: Front left
  • Splines gearbox side: 25
  • Splines wheel side: 30
  • Total length: 632 mm
  • Diameter 1: 84 mm
Item no.:211784
  • Position: Front right
  • Splines gearbox side: 25
  • Splines wheel side: 30
  • Total length: 1,008 mm
  • Joint diameter: 84 mm
Item no.:3572055
  • Position: Outer
  • Inner splines: 27
  • Seal diameter: 59 mm
  • Outer splines: 30
  • ABS teeth: 29
Item no.:113339
  • Position: Front left
  • Splines gearbox side: 25
  • Splines wheel side: 30
  • Total length: 624 mm
  • Diameter 1: 91 mm
Item no.:2121983
  • Position: Front right
  • Splines gearbox side: 34
  • Splines wheel side: 30
  • Total length: 606 mm
  • Joint diameter: 91 mm
Item no.:354979
  • Position: Front, Outer
  • Inner splines: 26
  • Seal diameter: 53 mm
  • Outer splines: 30
  • Thread size: M24X1.5
Item no.:0567333
  • Position: Front, Outer
  • Inner splines: 27
  • Splines wheel side: 30
  • Outer diameter: 100 mm
Item no.:3574996
  • Position: Front, Outer
  • Inner splines: 26
  • Seal diameter: 60 mm
  • Outer splines: 30
  • Thread size: M24X1,5
Item no.:3589190
  • Position: Front, Outer
  • Inner splines: 23
  • Seal diameter: 52,3 mm
  • Outer splines: 30
  • Thread size: M24X1,5
Item no.:114406
  • Splines gearbox side: 34
  • Splines wheel side: 30
  • Total length: 665 mm
  • Diameter 1: 91 mm
  • Diameter 2: 86 mm
Item no.:2162199
  • Position: Front right
  • Splines gearbox side: 27
  • Splines wheel side: 30
  • Total length: 614 mm
  • Joint diameter: 91 mm
Item no.:316794
  • Splines gearbox side: 34
  • Splines wheel side: 30
  • Total length: 606 mm
  • Joint diameter: 91 mm
  • Joint diameter, gearbox side: 94 mm
Item no.:111054
  • Splines gearbox side: 34
  • Splines wheel side: 30
  • Total length: 665 mm
  • Diameter 1: 91 mm
  • Diameter 2: 86 mm

Drivetrain for Vauxhall Insignia MK I Saloon

The Vauxhall Insignia MK I Saloon is well regarded for its road comfort and stability, but keeping those qualities intact requires a drivetrain in first-rate condition. As driveline specialists, we understand the specific demands placed on the power transmission in this particular model. With 16 carefully matched items in our range, we cover most repair and maintenance needs for your car's drivetrain system. Choosing the right components is vital to prevent unnecessary wear on related parts such as the gearbox and wheel bearings. We focus on supplying parts that meet or exceed original specifications, giving you complete peace of mind over every mile. Whether you drive a diesel or petrol variant of the Insignia Saloon, driveline integrity is essential for a safe, quiet drive. By investing in quality parts from an expert, you ensure your Vauxhall keeps delivering the performance you rely on.

How the drivetrain works on the Vauxhall Insignia MK I Saloon

The drivetrain layout on a Vauxhall Insignia MK I Saloon is a sophisticated assembly engineered to transfer engine torque smoothly to the wheels with minimal power loss. The setup centres on a gearbox connected via inner CV joints to robust drive shafts. These shafts extend outwards to the outer constant velocity joints seated in the wheel hubs. This design allows the road wheels to move vertically with suspension travel and horizontally when steering, while delivering an uninterrupted flow of power. Every component in this assembly is precision-balanced to minimise vibrations and maximise the working life of bearings and seals. Given the weight and power output of the Insignia, these parts must be properly dimensioned. A healthy drivetrain is not just about forward momentum; it also underpins vehicle dynamics and fuel economy, as lower friction across joints and shafts directly benefits running costs.

Common faults and symptoms

Several distinct warning signs indicate that the drivetrain on your Vauxhall Insignia MK I Saloon is worn and due for attention. One of the most typical symptoms is a rhythmic clicking or knocking sound on tight turns at low speed. This almost always points to a worn outer CV joint for the Vauxhall Insignia MK I Saloon that has developed play in its internal bearing tracks. If you instead feel vibrations through the steering wheel or chassis during acceleration, particularly at higher speeds, an inner CV joint for the Vauxhall Insignia MK I Saloon may be failing. It is equally essential to check the boots regularly: if a boot splits, vital grease escapes while road grit and water get in. This accelerates wear drastically and can cause total failure. Ignoring early warning signs can lead to a snapped driveshaft, leaving the car stranded and risking secondary damage to surrounding components.

Common parts to replace on the Vauxhall Insignia MK I Saloon

On the Vauxhall Insignia MK I Saloon, certain driveline parts experience heavier wear than others due to the vehicle's weight and torque. In our catalogue you will find a broad selection of critical components. We currently stock several drive shaft variants for the Vauxhall Insignia MK I Saloon, catering to the model's different engine and gearbox combinations. Alongside complete driveshafts, we also supply various outer CV joints and multiple inner CV joints. Replacing only the worn joint is often a cost-effective fix, but where a shaft is damaged or has covered substantial mileage, fitting a complete drive shaft can be the quickest, most durable solution. All our replacement parts are carefully selected for precise fitment and durability—essential requirements for a car of the Insignia's size. We also supply the necessary fitting hardware to make sure the job is done right first time.

How to find the right part for your Vauxhall Insignia MK I Saloon

Navigate directly to the right category for your Vauxhall Insignia MK I Saloon:

When troubleshooting driveline problems, it pays to start in the right section right away. By narrowing down the specific component categories for the Vauxhall Insignia MK I Saloon, you can easily distinguish between drive shaft, CV joint and prop shaft issues, taking you straight to the products that match your car's symptoms and specifications.

Navigating technical specifications can seem daunting, but we keep the selection process simple and dependable. To find the exact match for your Vauxhall Insignia MK I Saloon, start by selecting your car's make, model and engine variant in our vehicle selector. This will filter our range down to components verified for your exact vehicle. Keep in mind that within the same model year, variations can occur depending on engine size and whether the car is manual or automatic. It is always wise to double-check key technical details such as spline counts and overall shaft length. Key categories for your model include:

  • Drive shafts – complete assemblies for quick, hassle-free replacement.
  • Outer CV joints – the most common wear item behind clicking noises on full lock.
  • Inner CV joints – the answer to shuddering and vibrations under acceleration.
With our specialised support and intuitive search tools, you can order the correct replacement parts with confidence, avoiding costly downtime during repairs. We help you choose the right part from the outset.

Why buy from CVJoint24?

CVJoint24 is your dedicated specialist for Vauxhall driveline components. As a Swedish driveline specialist shipping across Europe from our warehouse in Helsingborg, Sweden, we combine a comprehensive catalogue with the technical know-how needed to ensure you buy with absolute confidence. We understand how important day-to-day vehicle reliability is, which is why we prioritise prompt order processing and rapid dispatch on our stocked products. Our fitment accuracy gives you peace of mind that the parts you select for your vehicle will fit correctly. Centred on proven quality, technical expertise and customer satisfaction, CVJoint24 is the trusted choice for DIY mechanics and professional garages looking for durable solutions. Count on us for competitively priced driveline parts dispatched promptly from our central Swedish warehouse, backed by friendly, knowledgeable advice whenever you need it.

Frequently Asked Questions about Drivetrain for Vauxhall Insignia MK I Saloon

How can I tell if a CV joint is failing on my Vauxhall Insignia MK I Saloon?

The most common sign is a clicking noise on full steering lock while driving, which indicates wear in the outer joint. Vibrations during acceleration often point to a fault in the inner joint.

Do all drive shafts fit every engine variant for the MK I Saloon?

No, drive shafts vary depending on engine output, gearbox type (manual/automatic) and sometimes chassis number. Always select your car's make, model and engine to find the correct version for your vehicle.

How does your fitment guarantee work for Vauxhall parts?

When you select your vehicle's make, model and engine, we filter parts verified for your specific car. If a part unexpectedly fails to fit despite choosing the correct vehicle details, you are covered by our guarantee.

Do your CV joint kits include everything needed for the replacement?

Yes, our kits for outer and inner CV joints are normally supplied complete with CV boot, grease, clips and the necessary mounting hardware to make the job easier.

Why should I choose a complete drive shaft instead of just a joint?

A complete drive shaft is often quicker to install and eliminates the risk of future problems with the other joint or the shaft itself, which can be more cost-effective in the long run.

Can I drive with a split CV boot on my Insignia?

It is not recommended. A split CV boot lets in dirt and water, which quickly ruins the CV joint and leads to a significantly more expensive repair than simply replacing the boot in good time.