Vauxhall Insignia MK I Sports Tourer

Welcome to your drivetrain specialist for the Vauxhall Insignia MK I Sports Tourer. As Swedish driveline specialists, we supply an extensive range of high-grade components tailored...

Products for Vauxhall Insignia MK I Sports Tourer

17 products
1 - 17 of 17
Item no.:628091
  • Position: Rear
  • Total length: 2,310 mm
  • Number of joints: 4
  • Number of centre bearings: 2
Item no.:112007
  • Position: Front left
  • Splines gearbox side: 25
  • Splines wheel side: 30
  • Total length: 632 mm
  • Diameter 1: 84 mm
Item no.:215795
  • Position: Front right
  • Splines gearbox side: 25
  • Splines wheel side: 30
  • Total length: 1,008 mm
  • Joint diameter: 84 mm
Item no.:3590665
  • Position: Outer
  • Inner splines: 27
  • Seal diameter: 59 mm
  • Outer splines: 30
  • ABS teeth: 29
Item no.:113534
  • Position: Front left
  • Splines gearbox side: 25
  • Splines wheel side: 30
  • Total length: 624 mm
  • Joint diameter: 91 mm
Item no.:114396
  • Position: Front left
  • Splines gearbox side: 25
  • Splines wheel side: 30
  • Total length: 624 mm
  • Diameter 1: 91 mm
Item no.:2179877
  • Position: Front right
  • Splines gearbox side: 34
  • Splines wheel side: 30
  • Total length: 606 mm
  • Joint diameter: 91 mm
Item no.:2190026
  • Position: Front right
  • Splines gearbox side: 27
  • Splines wheel side: 30
  • Total length: 614 mm
  • Joint diameter: 91 mm
Item no.:350661
  • Position: Front, Outer
  • Inner splines: 26
  • Seal diameter: 53 mm
  • Outer splines: 30
  • Thread size: M24X1.5
Item no.:0529917
  • Position: Front, Outer
  • Inner splines: 27
  • Splines wheel side: 30
  • Outer diameter: 100 mm
Item no.:0435387
  • Position: Front, Inner
  • Inner splines: 26
  • Seal diameter: 35 mm
  • Total length: 161 mm
  • Outer splines: 26
Item no.:3592808
  • Position: Front, Outer
  • Inner splines: 26
  • Seal diameter: 60 mm
  • Outer splines: 30
  • Thread size: M24X1,5
Item no.:3574612
  • Position: Front, Outer
  • Inner splines: 23
  • Seal diameter: 52,3 mm
  • Outer splines: 30
  • Thread size: M24X1,5
Item no.:115049
  • Splines gearbox side: 34
  • Splines wheel side: 30
  • Total length: 665 mm
  • Diameter 1: 91 mm
  • Diameter 2: 86 mm
Item no.:315579
  • Splines gearbox side: 34
  • Splines wheel side: 30
  • Total length: 606 mm
  • Joint diameter: 91 mm
  • Joint diameter, gearbox side: 94 mm
Item no.:215155
  • Position: Front right
  • Splines gearbox side: 27
  • Splines wheel side: 30
  • Total length: 614 mm
  • Joint diameter: 91 mm
Item no.:118549
  • Splines gearbox side: 34
  • Splines wheel side: 30
  • Total length: 665 mm
  • Diameter 1: 91 mm
  • Diameter 2: 86 mm

Drivetrain for Vauxhall Insignia MK I Sports Tourer

The Vauxhall Insignia MK I Sports Tourer is an estate that combines generous space with solid performance, placing demanding loads on the vehicle drivetrain. The driveline is the heart of the car's ability to transfer power smoothly and safely, and for a heavy estate like the Sports Tourer, component condition is critical for both driving dynamics and fuel efficiency. At CVJoint24 you will find a carefully selected range of parts precisely engineered for this model. We understand the importance of precision when it comes to the drivetrain, supplying components that meet or exceed original equipment specifications.

Maintaining the drivetrain on a Vauxhall Insignia MK I Sports Tourer is not just about resolving acute faults; it is about preventing future failures. By choosing the right spare parts, you ensure that engine torque reaches the wheels without unnecessary energy loss or vibration. Our focus is on parts that guarantee a perfect fit, reducing installation time and extending the service life of your repair. With a wide range in our catalogue for this specific estate, we cover virtually every driveline requirement across the car's lifecycle.

How the drivetrain is engineered on the Vauxhall Insignia MK I Sports Tourer

The drivetrain on the Vauxhall Insignia MK I Sports Tourer is a sophisticated assembly designed to handle front-wheel drive and, on certain models, all-wheel drive. The system comprises several interacting components, with the drive shafts playing a central role in transferring power from the gearbox to the wheel hubs. Each drive shaft is fitted with two constant velocity joints: an inner CV joint closest to the gearbox and an outer CV joint at the wheel hub. These joints allow the shaft to rotate smoothly while the suspension articulates and the front wheels steer.

For the Sports Tourer estate, these parts are dimensioned to withstand the extra weight and payload capacity of a large estate car. The inner joint is engineered to accommodate axial plunge, which is essential as the vehicle's suspension travels under load. The outer joint is built to handle significant steering angles without sacrificing efficiency. The entire assembly is shielded by durable CV boots that retain grease and keep out dirt, which is critical to avoid premature wear on the precision-machined bearing surfaces inside the joints.

Common faults and symptoms

There are several telltale signs that the drivetrain on your Vauxhall Insignia MK I Sports Tourer is wearing out. One of the most frequent symptoms of a failing outer CV joint is a rhythmic clicking or knocking noise clearly audible during sharp turns at low speeds. This occurs when the balls inside the joint develop play in their tracks due to wear or lack of lubrication. If you notice vibrations through the steering wheel or car chassis under acceleration, it usually points to a worn inner CV joint.

Another common warning sign is grease splattered inside the wheel rim or around the wheel arch. This is typically caused by a split CV boot. Once the boot tears, lubricating grease escapes and road dirt enters, rapidly destroying the joint. It is therefore vital to inspect these rubber gaiters regularly. If a complete drive shaft becomes bent or unbalanced, it will generate constant vibrations that intensify with vehicle speed, compromising ride comfort and risking long-term damage to gearbox bearings and suspension components.

Common parts to replace on the Vauxhall Insignia MK I Sports Tourer

Within our drivetrain category for the Vauxhall Insignia MK I Sports Tourer, certain items are particularly sought-after. We stock complete drive shafts, allowing you to replace the entire assembly for a faster, more dependable repair. Replacing the complete driveshaft is often more cost-effective over time, as you receive brand-new inner and outer joints alongside pre-fitted CV boots. This eliminates the risk of an old joint failing shortly after replacing the opposite end.

In addition to complete shafts, we supply separate outer CV joints and inner CV joints for situations where the shaft itself remains undamaged. Deciding between a single joint or a complete driveshaft depends on mileage and the overall condition of the surrounding driveline. For Insignia owners, replacing CV boot kits is also routine maintenance, as these form the primary barrier against water, grit and road salt. With our comprehensive selection for Vauxhall, you can be sure of finding the precise part for your Sports Tourer.

How to find the correct part for your Vauxhall Insignia MK I Sports Tourer

Navigate directly to the relevant subcategory for your Vauxhall Insignia MK I Sports Tourer:

When diagnosing drivetrain issues, it is best to narrow down the correct section immediately. By comparing the dedicated categories for the Vauxhall Insignia MK I Sports Tourer, you can readily differentiate between problems in the drive shaft, CV joints or propeller shaft and proceed to the exact section matching your symptoms and specifications.

Following these links provides a complete view of the components available. If you are uncertain whether you require an inner or outer joint, or if a complete driveshaft is the wiser option, our customer support team is ready to assist with technical expertise gained from years of working with Vauxhall drivelines.

Why buy from CVJoint24?

Choosing CVJoint24 means ordering from a Swedish driveline specialist dedicated to vehicle power transmission. We are not a general car parts retailer, but specialists who understand every detail of drive shafts and their operation. Our focus is on offering accurate product matching and reliable technical advice, ensuring you select the correct part straight away. We understand how essential your Vauxhall Insignia MK I Sports Tourer is to daily life, which is why we maintain high stock availability in our warehouse and provide rapid delivery across the EU.

We back our range with an exact-fit guarantee: choose your car's make, model and engine variant, and if a part does not fit as intended, we resolve it without extra hassle. That is part of our commitment to supplying the correct component first time. With our in-depth knowledge of driveline systems, we offer guidance that goes beyond simple sales, helping you achieve a durable, lasting repair. Rely on CVJoint24 for dependable parts that keep your Vauxhall running smoothly for thousands of kilometres.

Frequently asked questions about drivetrain parts for Vauxhall Insignia MK I Sports Tourer

How do I know which drive shaft fits my Vauxhall Insignia MK I Sports Tourer?

The simplest and most reliable way is to select your vehicle's make, model, and engine variant on our website. This filters our range so that only the parts matching your specific car are displayed.

What are the most common signs of a failing outer CV joint?

A clicking or knocking noise when turning sharply, particularly at low speeds, is the most typical symptom that an outer CV joint is worn and requires replacement.

Is it better to replace the complete drive shaft rather than just a CV joint?

Replacing the complete drive shaft is often more cost-effective, as you receive both inner and outer joints alongside brand new CV boots fully assembled, reducing labour costs and the risk of future failures.

What causes vibrations during acceleration in my Insignia?

Vibrations under acceleration are frequently caused by wear in the inner CV joint. They can also stem from an imbalance in the drive shaft itself if it has suffered damage.

Are CV boots included when I purchase a CV joint from you?

Yes, when you purchase a CV joint kit from us, it normally includes the CV boot, specialist grease, and all necessary fitting hardware such as clips and circlips.

Do you offer a fitment guarantee on parts for Vauxhall?

Yes, we offer a fitment guarantee when you choose parts using your car's exact make, model, and engine variant, ensuring that the component will fit your Vauxhall Insignia MK I Sports Tourer.