Volkswagen EOS 3.2 V6
Spare parts and drivetrain components for the Volkswagen EOS 3.2 V6. Select your make, model and engine to ensure correct fitment before ordering.
Products for Volkswagen EOS 3.2 V6
- Position: Inner
- Inner splines: 28
- Seal diameter: 108 mm
- Total length: 32 mm
- Joint diameter: 108 mm
- Position: Outer
- Inner splines: 27
- Seal diameter: 59 mm
- Outer splines: 36
- Thread size: M16X1,5
- Position: Front left
- Splines wheel side: 36
- Total length: 495 mm
- Joint diameter: 98 mm
- Joint diameter, gearbox side: 108 mm
- Position: Front left
- Splines gearbox side: 28
- Splines wheel side: 27
- Total length: 405 mm
- Position: Front right
- Splines wheel side: 36
- Total length: 795 mm
- Joint diameter: 98 mm
- Joint diameter, gearbox side: 108 mm
- Position: Front left
- Splines wheel side: 36
- Total length: 470 mm
- Joint diameter: 98 mm
- Joint diameter, gearbox side: 119 mm
- Position: Front right, Inner
- Inner splines: 28
- Seal diameter: 50 mm
- Total length: 300 mm
- Joint diameter: 102 mm
- Position: Front right
- Splines wheel side: 36
- Total length: 754 mm
- Joint diameter: 98 mm
- Joint diameter, gearbox side: 119 mm
- Position: Front, Inner
- Inner splines: 34
- Seal diameter: 119 mm
- Total length: 78 mm
- Joint diameter: 119 mm
Drivetrain for Volkswagen EOS 3.2 V6
The Volkswagen EOS 3.2 V6 is a unique car that combines the elegance of a convertible with the punch of a six-cylinder engine. To transfer this power to the road smoothly and without vibration, the drivetrain must be in first-class condition. The drivetrain on an EOS 3.2 V6 is engineered to manage the higher torque generated by the VR6 engine, meaning its components face considerably greater strain than those on smaller engine models. Proper drivetrain maintenance is vital for both driving comfort and safety. Here you will find the specific components required to maintain your car's original handling and performance.
As driveline specialists, we understand the technical nuances of the Volkswagen EOS. We focus on providing parts that not only fit physically, but also withstand the operating conditions generated by a 3.2 V6 engine. Whether you need to replace a worn CV joint or a complete drive shaft, you can trust our parts to deliver the highest quality. By choosing the right components, you extend your car's lifespan and protect against consequential damage to the gearbox and suspension.
How the Volkswagen EOS 3.2 V6 drivetrain is constructed
The drivetrain of a Volkswagen EOS 3.2 V6 is a sophisticated layout that typically pairs front-wheel drive with a DSG automatic gearbox, although specifications can vary. Power transfers from the gearbox through the drive shafts to the front wheels. Each drive shaft is fitted with two joints: an inner CV joint closest to the gearbox and an outer CV joint at the wheel hub. The inner joint accommodates axial travel as the suspension moves up and down, while the outer joint enables smooth steering angles while continuously transmitting power.
Because the 3.2 V6 engine is heavier and more powerful than the four-cylinder alternatives, the drive shafts and joints are reinforced to withstand this additional load. It is therefore crucial never to fit parts intended for smaller engines, as they can quickly fail under the torque of the V6 engine. In certain cases, a propeller shaft may also be relevant depending on specific chassis designs or drivetrain configurations for the model. Understanding this layout is essential for correctly diagnosing any issues.
Common faults and symptoms
Several clear signs indicate that your Volkswagen EOS 3.2 V6 drivetrain is wearing out. One of the most common symptoms is a clicking or knocking sound when turning on full lock at low speed. This typically points to a defective outer CV joint, frequently caused by a split CV boot allowing grease to leak out and dirt to enter. If you instead notice vibrations throughout the car under acceleration, the inner CV joint is often the culprit. These vibrations can be felt through both the steering wheel and seats, and usually worsen under heavier throttle.
Another issue to watch out for is imbalance or abnormal noises at higher speeds, which can stem from a bent driveshaft or problems with a propeller shaft if fitted. Acting quickly when these symptoms appear is vital. In the worst cases, a failed CV joint can cause the drive shaft to detach entirely, leaving the car stranded and risking severe damage to surrounding components. Regular inspection of the drive shaft boots is the best way to prevent expensive repairs later on.
Common parts to replace on the Volkswagen EOS 3.2 V6
To make finding parts simpler, we have categorised the most essential components for your car's power delivery. Here are the most common parts that EOS 3.2 V6 owners need to service or replace:
- Drive shaft for Volkswagen EOS 3.2 V6 – Complete shafts for both left and right sides, built to cope with V6 engine torque.
- Outer CV joint for Volkswagen EOS 3.2 V6 – The most frequent wear component, often replaced due to clicking noises on full lock.
- Inner CV joint for Volkswagen EOS 3.2 V6 – Vital for resolving vibrations under acceleration and ensuring smooth power transfer.
- Propeller shaft for Volkswagen EOS 3.2 V6 – For configurations where power delivery requires a longitudinal prop shaft.
By replacing worn parts promptly, you preserve your car's performance and ensure that the power from the 3.2-litre engine is handled safely. We always recommend inspecting both sides at the same time, as wear on the left and right sides is often comparable.
How to find the right part for your Volkswagen EOS 3.2 V6
Proceed to the relevant category for your Volkswagen EOS 3.2 V6:
On a vehicle with several possible driveline faults, it pays to start in the correct section immediately. By comparing the exact component areas for the Volkswagen EOS 3.2 V6, it is easier to isolate issues between the drive shaft, CV joint or propeller shaft, and move directly to the page that matches your symptoms and fitment.
- Drive shafts for Volkswagen EOS 3.2 V6
- Outer CV joints for Volkswagen EOS 3.2 V6
- Inner CV joints for Volkswagen EOS 3.2 V6
- Propeller shafts for Volkswagen EOS 3.2 V6
Locating the exact replacement part for a specific model like the Volkswagen EOS 3.2 V6 can sometimes be tricky due to differences across model years and gearbox types. The most reliable way to select the right part is to filter by your car's make, model and engine variant. This narrows down the selection to components technically verified for your specific car, removing any guesswork around dimensions, spline counts and other technical details that vary between drive shafts.
Once you have filtered the results for your car, we recommend reading the product descriptions carefully for detailed dimensions and technical specifications. If you are unsure whether an inner or outer constant velocity joint is responsible for your issue, feel free to contact our customer support team for expert advice. Our aim is to help you order the correct item straight away, avoiding unnecessary returns and saving you time and money on your repair.
Why shop with CVJoint24
CVJoint24 is the international shop of a Swedish driveline specialist. We maintain a focused, in-depth range, allowing us to offer technical expertise that general car parts stores rarely possess. For your Volkswagen EOS 3.2 V6, this means access to high-quality components with guaranteed fitment. We understand the importance of getting your car back on the road quickly, and we dispatch promptly across the EU from our central Swedish warehouse.
Our business is built on supplying the correct part at competitive prices without compromising on quality. When you select your vehicle's make, model and engine, you can order with total confidence. We combine the personal support of a dedicated specialist with the convenience of a modern online shop. Choose CVJoint24 for a hassle-free experience and driveline components built to last for many thousands of kilometres.
Frequently Asked Questions about Drivetrain for Volkswagen EOS 3.2 V6
What are the most common signs of a worn CV joint on my EOS 3.2 V6?
The most common symptoms are a clicking noise when cornering sharply (outer CV joint) or vibrations through the car during acceleration (inner CV joint). Because the 3.2 V6 engine produces high torque, these symptoms can be more pronounced than on smaller models.
Do drive shafts from a standard Golf fit my Volkswagen EOS 3.2 V6?
No, you should always select parts specific to your model. The EOS 3.2 V6 often features reinforced components and specific dimensions designed to handle the power of the VR6 engine and the car's unique chassis design. Always select your exact make, model and engine to find the right part.
How often should I inspect the CV boots on my EOS?
We recommend inspecting the CV boots at every service or seasonal tyre change. A split CV boot quickly leads to constant velocity joint failure, so replacing an inexpensive boot in good time can save you the expense of a complete drive shaft.
Why does my car vibrate under acceleration but not at a constant speed?
This is a classic symptom of a worn inner CV joint. When accelerating, the joint is subject to the greatest load, and any play or wear inside the joint housing creates vibrations that travel through the drivetrain.
Is everything I need included when I buy a CV joint from you?
Yes, our CV joint kits are normally supplied complete with the CV joint, CV boot, grease, clamps and, where required, the fixing bolt or nut. Everything you need for a straightforward replacement.
Can I replace just the CV joint, or do I need to replace the entire drive shaft?
On the Volkswagen EOS 3.2 V6, you can often replace just the outer or inner CV joint if the shaft itself is undamaged. This is a cost-effective repair method, although fitting a complete drive shaft can sometimes be quicker and easier.