Volkswagen Golf VII Variant 1.6

Welcome to CVJoint24, your Swedish driveline specialist for the Volkswagen Golf VII Variant 1.6. We offer a carefully selected range of high-quality components engineered to preserve...

Products for Volkswagen Golf VII Variant 1.6

7 products
1 - 7 of 7
Item no.:0493987
  • Position: Inner
  • Seal diameter: 94 mm
  • Inner splines: 33
  • Number of joints: 3
  • ABS teeth: 0
Item no.:627403
  • Number of centre bearings: 1
  • Number of joints: 1
  • Total length: 2,160 mm
Item no.:113154
  • Position: Front left
  • Diameter: 83 mm
  • Flange diameter: 100 mm
  • Total length: 524 mm
  • ABS teeth: 0
Item no.:110589
  • Position: Front left
  • Flange diameter: 108 mm
  • Total length: 525 mm
  • Splines gearbox side: 108
  • ABS teeth: 0
Item no.:214022
  • Position: Front right
  • Flange diameter: 100 mm
  • Total length: 815 mm
  • Splines wheel side: 36
  • ABS teeth: 0
Item no.:2190850
  • Position: Front right
  • Total length: 883 mm
  • Splines gearbox side: 26
  • Splines wheel side: 36
  • ABS teeth: 0
Item no.:657521
  • Position: Rear, Outer
  • Seal diameter: 59 mm
  • Inner splines: 33
  • Outer diameter: 82 mm
  • Splines wheel side: 36

Drivetrain for Volkswagen Golf VII Variant 1.6

The drivetrain in a Volkswagen Golf VII Variant 1.6 is an intricate piece of engineering responsible for transferring engine power to the wheels with minimal loss and maximum control. As the owner of this versatile estate, you know that reliability is everything, especially when the car is used for both daily commuting and longer family trips. The drivetrain consists of several interacting components, from the gearbox out to the wheel hubs, and each part plays a vital role in the vehicle's driving dynamics. Here at CVJoint24, you will find a dedicated range tailored specifically for the 1.6 version of the Golf VII Variant. We understand the technical nuances that distinguish this model from others in the Volkswagen family, allowing us to supply components that meet or exceed original equipment specifications.

Maintaining the drivetrain is an investment in your car's longevity and your safety on the road. By choosing the correct spare parts, you ensure that power delivery remains smooth and vibration-free for many kilometres to come. Our focus is on providing components that endure the demanding conditions of European roads and winters, which is especially important for an estate car that often carries heavy loads.

How the drivetrain is engineered on the Volkswagen Golf VII Variant 1.6

The layout of the drivetrain on a Volkswagen Golf VII Variant 1.6 is based on Volkswagen's proven MQB platform, featuring a transverse engine and front-wheel drive as standard. Power originates in the engine and passes through the gearbox to a drive shaft on each side. Each drive shaft is fitted with two joints: an inner joint that connects to the gearbox and an outer joint located at the wheel hub. The inner joint allows for axial movement as the suspension travels up and down—essential for ride comfort—while the outer CV joint enables steering while delivering power smoothly.

For models equipped with four-wheel drive, a propeller shaft is added to send drive to the rear axle via a Haldex coupling. The entire assembly is protected by rubber CV boots that retain the lubricating grease and keep out road grime. The precision of these components is critical to prevent imbalance and premature wear on surrounding chassis parts, such as wheel bearings and gearbox mounts. Understanding this layout will help you identify which part needs replacement when issues arise.

Common faults and symptoms

There are several clear warning signs that the drivetrain on your Volkswagen Golf VII Variant 1.6 is beginning to wear. One of the most typical symptoms is a clicking or knocking noise when taking tight turns at low speeds, which usually points to a defective outer CV joint. If you instead experience vibrations through the steering wheel or the car's body during acceleration, it may indicate that an inner constant velocity joint or the drive shaft itself suffers from imbalance or internal wear. This is often most noticeable at motorway speeds or under load when climbing hills.

On all-wheel-drive models, vibrations occurring at specific speeds can frequently be traced to faults in the prop shaft or its centre bearing. It is also essential to inspect the CV boots regularly; a split boot quickly leads to grease loss and dirt ingress, ruining the joint in very little time. Ignoring these warning signs can result in complete failure and leave you stranded. Early diagnosis and action are always the best course to keep repair costs down and ensure your Volkswagen remains thoroughly dependable.

Common parts to replace on the Volkswagen Golf VII Variant 1.6

On the Volkswagen Golf VII Variant 1.6, certain driveline parts require attention more frequently due to natural wear and road conditions. In our catalogue you will find complete driveshafts, which resolve most common issues for this model. A complete drive shaft is often the most cost-effective option for major wear because you replace the entire assembly at once, saving valuable workshop time. If the fault is isolated to the wheel side, an outer CV joint may be all that is needed, whereas an inner joint addresses problems closer to the gearbox.

Here is a quick overview of the most relevant categories for your vehicle:

  • Drive shaft - Complete shafts for straightforward installation and maximum service life.
  • Outer CV joint - To cure clicking noises during cornering on full steering lock.
  • Inner CV joint - To eliminate vibrations under acceleration and heavy load.
  • Propeller shaft - For all-wheel-drive models suffering from driveline vibration or imbalance.

By selecting the appropriate category, you can quickly navigate to the components suited to your car's exact configuration and engine variant.

Find the right part for your Volkswagen Golf VII Variant 1.6

Proceed to the relevant section for your Volkswagen Golf VII Variant 1.6:

When dealing with driveline issues, it is best to start in the right component section straight away. By comparing the exact areas for your Volkswagen Golf VII Variant 1.6, it becomes much easier to distinguish between drive shaft, CV joint, or prop shaft faults, leading you directly to the correct parts.

Finding the correct car parts for a Volkswagen Golf VII Variant can sometimes seem daunting due to technical revisions across production years. To ensure you receive a component that fits perfectly, simply select your car's make, model, and engine variant in our store. This automatically filters our catalogue so that only compatible parts for your specific Volkswagen Golf VII Variant 1.6 are displayed. This is especially vital for drive shafts and joints, where factors such as spline counts, overall length, and circlip styles can differ between manual and DSG transmissions.

Whether you are unsure which side requires replacement, or need both inner and outer components, you can rely on our accurate and up-to-date technical data. We aim to help you get the right part on the first attempt, saving both time in the garage and unnecessary return shipping costs. Our database accounts for every technical detail of the 1.6 engine, giving you total confidence with every order.

Why buy from CVJoint24?

CVJoint24 is not just another general car parts retailer; we are the international shop of a Swedish driveline specialist shipping directly from our central warehouse in Helsingborg, Sweden. When you purchase parts for your Volkswagen Golf VII Variant 1.6 from us, you benefit from specialist knowledge that is hard to find elsewhere. We provide an exact-fit guarantee so you can be confident that the parts you order will install on your car without modification. Our dedication to getting it right the first time minimises the risk of incorrect orders and garage downtime.

We also understand how important it is to get your vehicle back on the road quickly, which is why we dispatch our extensive range of in-stock parts promptly across the EU. Our comprehensive inventory and technical expertise make us the ideal partner for DIY mechanics and professional garages seeking quality and precision. Choose CVJoint24 for a smooth purchasing experience, expert support, and driveline components built to perform reliably in every condition.

Frequently Asked Questions about Drivetrain for Volkswagen Golf VII Variant 1.6

How do I know if my Golf VII Variant 1.6 needs a new drive shaft?

The most common signs are vibrations under acceleration or a clicking noise when cornering. If vibrations persist despite balanced tyres, the drive shaft is a likely cause.

Do all CV joints fit all Golf VII models?

No, CV joints vary in size and spline count depending on the engine and gearbox. The 1.6 model has specific dimensions that differ from, for example, the GTI or R.

What is included in a CV joint kit from you?

Our kits normally contain the CV joint itself, a model-specific CV boot, high-grade grease, circlips and the necessary clamps for a complete installation.

Can I replace just the CV boot if it is split?

Yes, if you catch the damage early before dirt and grit have penetrated the joint, replacing just the CV boot may be sufficient. If the joint has already started making noises, the entire joint must be replaced.

How quickly are parts delivered for my Volkswagen?

We dispatch quickly across Europe so that you can get your car back on the road as soon as possible.

Does the fitment guarantee apply when selecting my vehicle details?

Yes, when you select your vehicle's make, model and engine, we guarantee that the displayed parts will fit your specific Volkswagen Golf VII Variant 1.6.