Volkswagen Golf VII 2.0 R 360S 4MOTION

Welcome to your driveline specialist for the Volkswagen Golf VII 2.0 R 360S 4MOTION. This high-performance model demands components engineered to withstand high torque outputs and an...

Products for Volkswagen Golf VII 2.0 R 360S 4MOTION

5 products
1 - 5 of 5
Item no.:214336
  • Position: Front right
  • Flange diameter: 108 mm
  • Total length: 590 mm
  • Splines gearbox side: 40
  • ABS teeth: 0
Item no.:319074
  • Position: Front left
  • Flange diameter: 108 mm
  • Joint diameter: 108 mm
  • Total length: 495 mm
  • ABS teeth: 0
Item no.:0408018
  • Position: Inner
  • Seal diameter: 94 mm
  • Inner splines: 33
  • Number of joints: 3
  • ABS teeth: 0
Item no.:343252
  • Position: Inner
  • Inner splines: 28
Item no.:651969
  • Position: Rear, Outer
  • Seal diameter: 59 mm
  • Inner splines: 33
  • Outer diameter: 82 mm
  • Splines wheel side: 36

Drivetrain for Volkswagen Golf VII 2.0 R 360S 4MOTION

The Volkswagen Golf VII 2.0 R 360S 4MOTION is a car that combines everyday practicality with extreme performance. Developing 360 hp coupled with an advanced four-wheel drive system, it places exceptionally high demands on every individual component in the drivetrain. Power transfer from the engine to the road must happen without losses and with pinpoint precision to retain the car’s unique handling dynamics. As a specialist in drivetrain parts, we understand the importance of fitting components that precisely match original equipment specifications for this specific variant. Whether you need to replace an entire drive shaft or a single joint, our aim is to provide components built to withstand the heavy loads that the 360S model generates during spirited driving.

Maintaining the drivetrain on a high-performance machine like this is vital for both safety and durability. Wear on drive shafts and CV joints can lead to consequential damage to the gearbox and differential if neglected. We have gathered the most essential parts for your Golf R 360S to make finding the right replacement straightforward. Drawing on our driveline expertise, you can rely on our car parts being of the highest standard and ready to fit directly to your vehicle for flawless operation.

How the drivetrain is configured on the Volkswagen Golf VII 2.0 R 360S 4MOTION

The drivetrain of the Volkswagen Golf VII 2.0 R 360S 4MOTION is an impressive engineering feat built around the 4MOTION all-wheel-drive system. This setup actively distributes torque between the front and rear axles based on driving conditions and available traction. For this to operate seamlessly, it demands robust drive shafts front and rear that can manage rapid torque spikes. The inner CV joint mounts to the gearbox or differential, allowing essential axial plunge, whilst the outer CV joint at the wheel hub accommodates steering angles whilst delivering continuous torque. On a 360S model, these components are frequently uprated compared to standard hatchbacks to handle the substantial output.

Every part in the system operates in tandem to deliver the remarkable stability and acceleration synonymous with the Golf R. The drive shafts serve as the final mechanical link before power meets the tarmac. Should one link in this chain fail, the entire vehicle dynamic suffers. For this reason, it is critical that all four driveshafts and their matching constant velocity joints remain in peak condition. Imbalance or play within a joint produces vibrations that travel throughout the entire chassis, which over time can cause premature wear to sensitive four-wheel-drive couplings.

Common faults and symptoms

There are several telltale signs that the drivetrain on your Volkswagen Golf VII 2.0 R 360S 4MOTION is nearing the end of its service life. One of the most typical symptoms is a clicking or knocking sound on full steering lock at lower speeds, which almost always points to a worn outer CV joint. Conversely, if you notice vibrations through the steering wheel or seat base during hard acceleration, it suggests an inner CV joint has developed excess play or that a drive shaft has lost its balance. Given the high power output of the 360S, these symptoms can surface much earlier than on standard models if driven hard.

Another telltale indicator is grease splattered across the inside of the alloy wheel or lining the wheel arch. This is almost invariably caused by a split CV boot. Once the boot fails, lubricating grease escapes whilst road grit and water penetrate the joint, resulting in rapid breakdown of the internal races and balls. If caught early enough, fitting a replacement boot may save the joint, but often internal damage has already occurred. Ignoring these warning signs risks complete driveline failure, which on an all-wheel-drive performance car can prove dangerous and costly.

Common parts to replace on the Volkswagen Golf VII 2.0 R 360S 4MOTION

For this specific performance variant, we have singled out the core components that most frequently require replacement. Our inventory currently includes five dedicated items matched precisely to the Golf VII 2.0 R 360S 4MOTION. These are primarily drive shafts and CV joints dimensioned to withstand the vehicle's high torque ratings. By selecting the appropriate category, you can quickly locate available options for either side of the vehicle, whether you require front-axle assemblies or the specific rear components designed for the 4MOTION drivetrain.

The most common parts in our stock for this model comprise:

  • Drive shaft for Volkswagen Golf VII 2.0 R 360S 4MOTION – We offer 2 distinct variants available to match your vehicle's requirements.
  • Outer CV joint for Volkswagen Golf VII 2.0 R 360S 4MOTION – 1 high-grade unit engineered for smooth steering and torque delivery.
  • Inner CV joint for Volkswagen Golf VII 2.0 R 360S 4MOTION – 2 variants tailored for gearbox and differential fitment.
These spare parts are precision-engineered to withstand the harsh forces produced by a 360-horsepower engine. Fitting the correct component from the outset saves both time and unnecessary expense in the workshop.

How to find the correct part for the Volkswagen Golf VII 2.0 R 360S 4MOTION

Navigate directly to the appropriate component category for your Volkswagen Golf VII 2.0 R 360S 4MOTION:

When troubleshooting driveline problems on a high-performance car, starting in the right category makes all the difference. By comparing the exact component sections for the Volkswagen Golf VII 2.0 R 360S 4MOTION, it becomes easy to distinguish between drive shaft, CV joint or propeller shaft issues, allowing you to narrow down the correct side and axle to match your symptoms.

Finding accurate replacement parts for an exclusive performance model like the Golf VII 2.0 R 360S 4MOTION might seem complex, but our catalogue makes the process straightforward. The most reliable approach is to select your car's exact make, model and engine variant in our vehicle selector. This filters out incompatible parts, presenting only technically verified components for your exact car and removing any risk of accidentally ordering parts meant for standard Golf variants, which cannot handle the R model's drivetrain loads.

Once filtered, browse through the relevant subcategories to locate the exact item needed. We always advise checking whether you require the left-hand or right-hand side, as well as confirming front or rear fitment. If you are unsure which component is producing the fault, use our symptom guidelines or get in touch with our team for expert advice. Our priority is ensuring you select the correct part first time, getting your car back on the road promptly with parts built to fit perfectly.

Why shop with CVJoint24

CVJoint24 is your Swedish driveline specialist, supplying vehicle owners across the EU from our central warehouse in Helsingborg, Sweden. We concentrate on a focused, highly specialised range of driveline products rather than general motoring accessories. This dedicated approach gives us deep technical expertise in components like drive shafts and CV joints, especially for performance platforms like the Volkswagen Golf VII 2.0 R 360S 4MOTION. Whenever you order, you benefit from our accurate fitment standards, ensuring the parts chosen for your model will fit cleanly and operate reliably.

We know how essential your car is and that downtime needs to be kept to a minimum, which is why we maintain fast dispatch on our stocked products across Europe. With an emphasis on premium quality and component relevance, we make sure you obtain the right part at a competitive price. Our specialist positioning provides confidence and technical backing that standard motor factors rarely match. When you order from us, you receive a dependable, technically sound solution engineered to preserve your car's true performance over the long haul.

Frequently asked questions about Drivetrain for Volkswagen Golf VII 2.0 R 360S 4MOTION

How do I know if a drive shaft fits my Golf R 360S?

The most reliable method is to select your car's exact make, model and engine variant in our store. Because the 360S model features a unique drivetrain designed for higher performance demands than a standard Golf, we filter out precisely the parts verified for your car's specifications.

What are the most common signs of a failing CV joint on a 4MOTION car?

The most common symptoms are clicking noises when turning (outer joint) or vibrations under acceleration (inner joint). On 4MOTION models, vibrations can also originate from the rear drive shafts, affecting the car's overall stability.

Do you offer a fitment guarantee on drivetrain parts for Volkswagen?

Yes, we always provide a fitment guarantee when you select your vehicle by make, model and engine. This means we guarantee that the part you order will fit your Volkswagen Golf VII 2.0 R 360S 4MOTION.

Can I replace just the CV boot if it is split?

Yes, if you catch the damage early and the joint is still clean and properly lubricated, replacing only the CV boot may be sufficient. However, if the joint has begun making noises or dirt has penetrated inside, we always recommend replacing the entire CV joint.

How quickly are parts delivered for my Golf VII?

We dispatch all orders for in-stock items promptly from our central warehouse. We know how important it is to get your car back on the road as quickly as possible.

Why are the drive shafts on the 360S model different from a standard Golf?

The 360S model produces significantly more torque and power. As a result, the drive shafts and joints are often built to heavier-duty dimensions to withstand the increased load and ensure durability under high stress.