Volkswagen Golf 1.8 I CAT

Welcome to your specialist for Volkswagen Golf 1.8 I CAT drivetrain components. We stock a carefully curated selection of 15 targeted parts for your model, including complete drive...

Products for Volkswagen Golf 1.8 I CAT

15 products
1 - 15 of 15
Item no.:0443791
  • Position: Inner
  • Seal diameter: 94 mm
  • Inner splines: 33
  • Joint diameter: 94 mm
Item no.:0597015
  • Position: Outer
  • Seal diameter: 50 mm
  • Inner splines: 30
  • Outer splines: 22
  • Joint diameter: 81 mm
Item no.:1173980
  • Position: Front left
  • Flange diameter: 94 mm
  • Total length: 540 mm
  • Splines wheel side: 22
Item no.:2188924
  • Position: Front right
  • Flange diameter: 100 mm
  • Total length: 769 mm
  • Splines wheel side: 22
Item no.:0600893
  • Inner diameter: 22 mm
  • Total length: 111 mm
Item no.:0617389
  • Inner diameter: 21 mm
  • Total length: 100 mm
Item no.:0494069
  • Position: Inner
  • Seal diameter: 100 mm
  • Inner splines: 33
  • Joint diameter: 100 mm
Item no.:0562610
  • Position: Outer
  • Seal diameter: 51 mm
  • Inner splines: 30
  • Outer splines: 22
Item no.:112431
  • Total length: 539 mm
  • Splines wheel side: 22
  • ABS teeth: 0
Item no.:2192133
  • Position: Front right
  • Flange diameter: 94 mm
  • Total length: 750 mm
  • Splines wheel side: 22
Item no.:0635109
  • Inner diameter: 22 mm
  • Total length: 111 mm
Item no.:0647050
  • Inner diameter: 21 mm
  • Total length: 100 mm
Item no.:354554
  • Position: Outer
  • Inner splines: 30
  • Outer diameter: 81 mm
  • Splines wheel side: 22
Item no.:2173819
  • Position: Front right
  • Flange diameter: 94 mm
  • Total length: 773 mm
  • Splines wheel side: 22
Item no.:217891
  • Total length: 773 mm
  • Splines wheel side: 22
  • ABS teeth: 0

Drivetrain for Volkswagen Golf 1.8 I CAT

The drivetrain in a Volkswagen Golf 1.8 I CAT is the heart of the car's power delivery, responsible for transferring torque efficiently from the engine to the wheels. For this specific model, which combines classic German engineering with a dependable 1.8-litre engine, it is crucial that every driveline component works in perfect harmony. A properly functioning drivetrain ensures not only vehicle performance but also your safety on the road. Here at CVJoint24, you will find a comprehensive range of parts engineered specifically for the Golf 1.8 I CAT, allowing you to maintain that original driving feel. We understand the importance of precision on older models where wear and tear has often taken its toll on moving components.

Our focus is on supplying components that meet or exceed original equipment specifications. Choosing the right parts for your Volkswagen Golf minimises the risk of unwanted vibrations and future breakdowns. We stock everything from complete shafts to vital fitting hardware to make your repair as smooth as possible. Maintaining the drivetrain is an investment in the longevity and reliability of your car, especially for a classic like the Golf 1.8 I CAT.

How the drivetrain is engineered on the Volkswagen Golf 1.8 I CAT

The layout of the drivetrain on a Volkswagen Golf 1.8 I CAT relies on a time-tested front-wheel-drive design that is both efficient and compact. Power is produced by the engine and channelled through the gearbox. From there, the drive shafts take over to transfer that power out to the front wheels. Each drive shaft is fitted with two joints: an inner joint mounted at the gearbox and an outer joint at the wheel hub. This assembly must withstand substantial stresses, especially under hard acceleration and tight cornering when the joint angles are at their greatest.

For Golf owners, this means maintaining a robust yet service-critical setup where CV boots for the Volkswagen Golf 1.8 I CAT play an essential part. The boots act as a protective barrier, keeping the vital lubricating grease inside the joints while sealing out dirt, road salt and moisture. If a boot splits, the finely machined bearing surfaces of the CV joint are immediately exposed to grit and water, accelerating wear rapidly. Understanding how these parts interact is the first step towards identifying when a component needs replacing before it causes consequential damage to more expensive transmission components.

Common faults and symptoms

There are several telltale signs that the drivetrain on your Golf is wearing out and requires attention. One of the most common symptoms is a rhythmic clicking or knocking noise on full steering lock while driving. This sound almost invariably points to a worn outer CV joint with excessive play in its raceways. If you instead notice vibrations through the steering wheel or bodywork, especially under brisk acceleration, the issue can often be traced to an inner CV joint on your Volkswagen Golf 1.8 I CAT. These vibrations are sometimes mistaken for wheel imbalance, but if they disappear when you come off the throttle, the drivetrain is usually the cause.

Another critical warning sign that every driver should watch for is grease splattered on the inside of the wheel rim or in the wheel arch. This is direct evidence of a torn CV boot. If caught early enough, fitting a replacement boot kit and repacking the joint with fresh grease may suffice, but dirt has often already entered. Ignoring these symptoms will eventually lead to complete failure, leaving the vehicle stranded without drive. Paying close attention to unusual noises and visual signs will save both time and money by letting you tackle the job before a shaft snaps or a constant velocity joint seizes completely.

Common replacement parts for the Volkswagen Golf 1.8 I CAT

On the Volkswagen Golf 1.8 I CAT, certain components naturally need replacing more often due to age and mileage. Our range is tailored to cover all power transmission requirements for this model. Here are our most frequently supplied categories:

  • Drive shafts: We stock 6 different variants to cover all requirements, for both the right- and left-hand side.
  • Outer CV joints: 3 specific models engineered for smooth wheel-end power delivery and full steering angles.
  • Inner CV joints: 2 variants designed for the gearbox end, accommodating essential axial plunge.
  • CV boots: 4 complete boot kits supplied with grease and clamps for a thorough, lasting repair.

Replacing a complete drive shaft on your Volkswagen Golf 1.8 I CAT is often far more time-effective than rebuilding individual joints, particularly if the original shaft has covered high mileage or suffers from imbalance. A replacement shaft arrives balanced and fully assembled with joints pre-fitted, saving time in the garage and reducing the risk of installation errors. For DIY mechanics looking for a targeted repair, all individual parts are readily available in our catalogue as well.

How to find the correct part for your Volkswagen Golf 1.8 I CAT

Navigate directly to the relevant category for your Volkswagen Golf 1.8 I CAT:

When diagnosing driveline faults, it helps to start in the correct product category. By narrowing down the specific component groups for the Volkswagen Golf 1.8 I CAT, you can quickly distinguish between issues with the drive shaft, CV joints or prop shaft, and proceed to the section that best matches your symptoms and fitment needs.

Finding the right replacement part for a classic model like the Golf 1.8 I CAT can occasionally present challenges due to running production changes or specification differences across model years. The most reliable way to find compatible parts in our catalogue is by selecting your exact make, model and engine variant. This filters our inventory to the 15 verified items suitable for your specific car, taking the guesswork out of ordering and ensuring you receive parts with the correct spline count and dimensions.

You can also browse directly through our main subcategories for an overview:

  • Drive shafts for Volkswagen Golf 1.8 I CAT
  • Outer CV joints for Volkswagen Golf 1.8 I CAT
  • Inner CV joints for Volkswagen Golf 1.8 I CAT
  • CV boots for Volkswagen Golf 1.8 I CAT
Our fitment guarantee gives you full peace of mind that the parts you order will fit your car seamlessly during installation. If you are ever unsure whether you need an outer constant velocity joint or an entire driveshaft assembly for your Volkswagen Golf 1.8 I CAT, simply compare our detailed technical specifications with the parts currently fitted to your vehicle.

Why shop with CVJoint24

CVJoint24 is the international shop of a Swedish driveline specialist shipping across the EU from our warehouse in Helsingborg, Sweden. We focus dedicatedly on drivetrain and power transmission components, giving us specialist knowledge and depth of stock that general car parts stores rarely match. When ordering from us, you get premium components backed by our accurate fitment guarantee and dependable EU-wide dispatch. We know how important it is to get your car back on the road quickly, whether it is your everyday commuter or a cherished project.

By choosing a specialist supplier like CVJoint24, you receive parts selected specifically for their durability and dimensional precision. We deal only with proven manufacturers to guarantee that every Volkswagen component meets exacting standards. With an emphasis on the correct part, sound technical guidance and attentive customer support, we are the trusted choice for Volkswagen Golf 1.8 I CAT owners who value quality at every link of the driveline. Select the right part first time and experience the difference of having a dedicated specialist on your side.

Frequently Asked Questions about Drivetrain for Volkswagen Golf 1.8 I CAT

How do I know if my Volkswagen Golf 1.8 I CAT needs a new drive shaft?

The most common signs are heavy vibrations under acceleration or unusual noises that do not disappear after replacing a CV joint. If the shaft is bent or the splines are damaged, the entire drive shaft should be replaced.

What is the difference between an inner and outer CV joint on a Golf?

The outer CV joint sits at the wheel and accommodates steering, whilst the inner joint sits at the gearbox and handles the suspension's up-and-down movement. Outer joints typically click when cornering, whereas inner joints cause vibrations.

Do all CV joints fit all Golf models?

No, there are substantial differences in splines and dimensions. For the Volkswagen Golf 1.8 I CAT, it is vital to select your exact make, model and engine variant to find the correct parts tailored to your engine and gearbox.

How often should I inspect the CV boots on my car?

We recommend a visual inspection during every service or seasonal tyre change. A split CV boot should be replaced immediately to prevent dirt and moisture from destroying the CV joint.

Are grease and clamps included when I buy a CV joint or boot?

Yes, at CVJoint24 our CV joints and CV boot kits are supplied complete with high-grade grease and the necessary fixings to ensure a correct installation.

Can I replace just the boot if the CV joint is still working?

Yes, if you catch a split early and the joint has not started to make noises, cleaning it out, repacking it with grease and fitting a new CV boot can extend its lifespan considerably.