Volkswagen Golf 2.0 R 4MOTION

Spare parts and drivetrain components for the Volkswagen Golf 2.0 R 4MOTION. Select your exact make, model and engine to ensure correct fitment.

Products for Volkswagen Golf 2.0 R 4MOTION

33 products
25 - 33 of 33
Item no.:627001
  • Position: Rear
  • Total length: 2,170 mm
  • Number of joints: 1
  • Outer diameter 1: 16 mm
  • Bolt circle diameter 1: 96 mm
Item no.:3599691
  • Position: Front, Outer
  • Inner splines: 33
  • Seal diameter: 59 mm
  • Outer splines: 36
  • Thread size: M16X1,5
Item no.:340212
  • Position: Front, Inner
  • Inner splines: 34
  • Seal diameter: 119 mm
  • Total length: 78 mm
  • Joint diameter: 119 mm
Item no.:148833
  • Position: Front left, Inner
  • Inner splines: 34
  • Seal diameter: 31 mm
  • Joint diameter: 85 mm
  • Outer splines: 37
Item no.:346768
  • Position: Inner
  • Inner splines: 28
  • Seal diameter: 108 mm
  • Total length: 32 mm
  • Joint diameter: 108 mm
Item no.:653527
  • Position: Rear, Outer
  • Inner splines: 33
  • Seal diameter: 59 mm
  • Outer splines: 36
  • Joint diameter: 82 mm
Item no.:346281
  • Position: Front, Inner
  • Inner splines: 28
  • Seal diameter: 108 mm
  • Total length: 32 mm
  • Joint diameter: 107 mm
Item no.:642114
  • Position: Rear, Inner
  • Splines gearbox side: 33
  • Outer splines: 33
  • Diameter: 86 mm
  • Width: 34 mm
Showing 25–33 of 33 products

Drivetrain for Volkswagen Golf 2.0 R 4MOTION

The Volkswagen Golf 2.0 R 4MOTION represents the pinnacle of engineering within the Golf range, where serious performance meets sophisticated all-wheel drive. Handling such high torque and rapid acceleration demands a drivetrain engineered to withstand extraordinary loads. At CVJoint24, you will find a carefully selected range of components engineered specifically for this model. We know that Golf R owners demand exceptional durability and precision, which is why we only supply parts that meet or exceed original equipment specifications.

Maintaining the drivetrain on a performance car such as the Golf R is essential to preserve its handling and dynamics. Every part, from the smallest CV boot to the complete propeller shaft, plays a vital role in distributing power between the wheels. By choosing the right replacement parts, you ensure the 4MOTION system operates as intended, delivering optimal traction and stability in all road conditions. We specialise in supplying the right parts for your car, so you can enjoy driving with total peace of mind.

How the drivetrain works on the Volkswagen Golf 2.0 R 4MOTION

The drivetrain on the Volkswagen Golf 2.0 R 4MOTION is an intricate system that differs substantially from front-wheel-drive Golf models. At its core is 4MOTION technology, which utilises an electronically controlled multi-plate clutch to distribute torque between the front and rear axles. Drive leaves the gearbox and is sent directly to the front wheels via front drive shafts, whilst power also travels rearwards via a propeller shaft for the Volkswagen Golf 2.0 R 4MOTION. This prop shaft is a critical link that must be precisely balanced to prevent vibrations at motorway speeds.

At the rear axle, power enters a rear differential that distributes torque to the rear wheels via rear driveshafts. The entire system works in tandem with the car's stability and traction control systems to divert torque instantly to where grip is strongest. Because the Golf R produces significantly more power than standard versions, the drivetrain components are dimensioned to endure rapid torque changes during aggressive driving. This calls for strict material standards and tight manufacturing tolerances across all joints and shafts.

Common faults and symptoms

Despite their robust design, drivetrain components on a Volkswagen Golf 2.0 R 4MOTION naturally experience wear, especially under spirited driving. A classic sign of a worn outer CV joint for the Volkswagen Golf 2.0 R 4MOTION is a distinct clicking or knocking noise when accelerating on full lock. This is commonly caused by a split CV boot, which allows road grime in and grease out, rapidly ruining the joint's bearing tracks.

Vibration during acceleration typically points to a faulty inner CV joint on the Volkswagen Golf 2.0 R 4MOTION. These constant velocity joints accommodate suspension travel and are particularly sensitive to play or binding. If vibrations occur at steady cruising speeds instead or resonate through the bodyshell, the prop shaft or its centre bearing may be failing. Addressing these symptoms promptly prevents secondary damage to the gearbox or differential, saving you from far more costly repairs later.

Common parts to replace on the Volkswagen Golf 2.0 R 4MOTION

For Golf R 2.0 4MOTION owners, certain parts require closer attention to sustain peak performance. Our range for this model includes multiple drive shaft variants covering different production years and technical revisions. Installing a complete drive shaft is often the most cost-effective solution for significant wear, as you receive new inner and outer CV joints alongside factory-fitted CV boots in a single unit. This cuts workshop installation time and ensures every component is in as-new condition.

In addition to complete shafts, separate CV joints and propeller shafts are common replacement items. We supply outer and inner CV joints for this model, as well as propeller shafts suited to the 4MOTION layout. Replacing an individual CV joint is a sensible option when the shaft itself remains undamaged. We also recommend inspecting all CV boots during regular servicing, as a supple, undamaged boot is the best preventative measure against expensive driveline failures.

Finding the right part for your Volkswagen Golf 2.0 R 4MOTION

Proceed to the relevant section for your Volkswagen Golf 2.0 R 4MOTION:

With several interconnected driveline assemblies, it is wise to start in the correct section immediately. By comparing the specific categories for the Volkswagen Golf 2.0 R 4MOTION, diagnosing drive shaft, CV joint or propeller shaft issues becomes simpler, leading you directly to the correct fitment.

Locating the exact spare parts for a performance Volkswagen Golf requires precision. Because the Golf R features unique driveline dimensions compared to standard models, relying on the model badge alone is never enough. The most dependable method to secure correct fitment on cvjoint24.com is selecting your exact make, model and engine variant. Filtering by these specifications displays only parts verified for your car, eliminating guesswork and unwanted returns.

Here are the categories available for your Volkswagen Golf 2.0 R 4MOTION:

  • Drive shafts for Volkswagen Golf 2.0 R 4MOTION
  • Outer CV joints for Volkswagen Golf 2.0 R 4MOTION
  • Inner CV joints for Volkswagen Golf 2.0 R 4MOTION
  • Propeller shafts for Volkswagen Golf 2.0 R 4MOTION
Exploring these product sections allows you to review exact technical data, dimensions and fitment details. We keep key parts in stock so your car spends minimal time off the road.

Why shop with CVJoint24

CVJoint24 is the international shop of a Swedish driveline specialist, dispatching orders across the EU from our central warehouse in Helsingborg, Sweden. By specialising exclusively in driveline components, we provide an extensive inventory and dedicated technical knowledge that general motor factors rarely match. When ordering components for your Volkswagen Golf 2.0 R 4MOTION, you benefit from our precise fitment guarantee. We know your time matters, and getting the right part the first time is our priority.

With prompt dispatch and swift delivery across Europe, we help keep garage downtime to a minimum. Our commitment to strict quality control makes us the trusted source for both enthusiasts and professional garages requiring dependable parts. As your Volkswagen drivetrain specialist, we ensure you receive components built to handle the power of your Golf R.

Frequently asked questions about drivetrains for the Volkswagen Golf 2.0 R 4MOTION

How do I know if a CV joint is worn on my Golf R?

The most common symptoms are a clicking noise on tight turns (outer CV joint) or vibrations through the steering wheel and bodywork during acceleration (inner CV joint). Also check for grease splatters on the inside of the wheel rim, which indicates a split CV boot.

Do drive shafts from a standard Golf fit a 2.0 R 4MOTION?

No, usually not. The Golf R features a bespoke drivetrain adapted for four-wheel drive and significantly higher torque. It is therefore vital to select your car's exact make, model and engine variant to ensure parts are specifically dimensioned for the R model.

What is the benefit of buying a complete drive shaft rather than just a CV joint?

A complete drive shaft includes both the inner and outer joints as well as new CV boots, fully assembled and dynamically balanced. This saves considerable installation time and prevents other ageing components on the shaft from needing replacement soon after.

Why does my car vibrate at higher speeds?

On a 4MOTION vehicle, high-speed vibrations can often be traced back to the propeller shaft. If the prop shaft is unbalanced or its centre bearing is worn, vibrations will travel throughout the entire cabin. Worn inner constant velocity joints can also cause similar issues.

Do you offer a guaranteed fit when I order from you?

Yes, we offer a guaranteed fit when you find parts by selecting your vehicle's make, model and engine. This ensures the spare part will fit your specific Volkswagen Golf 2.0 R 4MOTION, giving you complete peace of mind.

How quickly can I get my spare parts delivered?

We dispatch all in-stock items swiftly from our warehouse. If you place your order early, your car parts are typically dispatched the same day so that you can get your Golf R back on the road without delay.