Volkswagen Golf 2.0 SDI

Spare parts and drivetrain components for Volkswagen Golf 2.0 SDI. Select your make, model and engine to verify fitment before ordering.

Products for Volkswagen Golf 2.0 SDI

11 products
1 - 11 of 11
Item no.:0448338
  • Position: Inner
  • Seal diameter: 100 mm
  • Inner splines: 33
  • Joint diameter: 100 mm
Item no.:0580348
  • Position: Outer
  • Seal diameter: 60 mm
  • Inner splines: 30
  • Outer splines: 36
  • Joint diameter: 89,9 mm
Item no.:1114029
  • Position: Front left
  • Flange diameter: 100 mm
  • Total length: 520 mm
  • Splines wheel side: 36
Item no.:2117301
  • Position: Front right
  • Flange diameter: 100 mm
  • Total length: 814 mm
  • Splines wheel side: 36
Item no.:655783
  • Position: Rear, Outer
  • Seal diameter: 59 mm
  • Inner splines: 33
  • Outer diameter: 82 mm
  • Splines wheel side: 36
Item no.:119532
  • Position: Front left
  • Flange diameter: 108 mm
  • Total length: 525 mm
  • Splines wheel side: 36
Item no.:311331
  • Total length: 545 mm
  • Splines wheel side: 36
  • ABS teeth: 0
Item no.:0428712
  • Position: Inner
  • Seal diameter: 94 mm
  • Inner splines: 33
  • Number of joints: 3
  • ABS teeth: 0
Item no.:1194042
  • Position: Front left
  • Flange diameter: 100 mm
  • Total length: 544 mm
  • Splines wheel side: 36
Item no.:2175526
  • Position: Front right
  • Flange diameter: 100 mm
  • Total length: 798 mm
  • Splines wheel side: 36
Item no.:216185
  • Flange diameter: 100 mm
  • Total length: 810 mm
  • Splines wheel side: 36

Drivetrain for Volkswagen Golf 2.0 SDI

The Volkswagen Golf 2.0 SDI is well known for its robust construction and dependable engine, but just like any vehicle, its drivetrain demands regular maintenance and the occasional replacement of wear items. The drivetrain is the system that transfers power from the engine to the wheels, and in a front-wheel-drive car such as the Golf 2.0 SDI, components like drive shafts and CV joints are vital for both drivability and ride comfort. As a Swedish driveline specialist, we supply an extensive range tailored to the exact requirements of this model. Our focus is on delivering car parts that meet or exceed original equipment specifications to guarantee lasting reliability.

When selecting parts from us, you can be sure we have thoroughly evaluated the technical requirements for the Volkswagen Golf 2.0 SDI. With a total of 6 dedicated items for this specific engine variant, including four distinct drive shafts and dedicated CV joints, we cover most repair scenarios. Looking after your drivetrain is not merely about mending broken components; it also prevents consequential damage to the gearbox and suspension. Choosing the correct parts right from the start saves both time and money over the long haul.

How the drivetrain is configured on the Volkswagen Golf 2.0 SDI

The drivetrain on a Volkswagen Golf 2.0 SDI uses a traditional front-wheel-drive configuration. Power is produced by the naturally aspirated diesel engine and routed through the gearbox to the two drive shafts. Each driveshaft is fitted with two joints: an inner CV joint attached to the gearbox and an outer CV joint located at the wheel hub. This design enables the wheels to move up and down with the suspension while steering, all while maintaining continuous power delivery. On the 2.0 SDI, these parts are precisely sized to handle the engine's specific torque output and operating characteristics.

A critical element of this assembly is the CV boots—the durable rubber gaiters enclosing the constant velocity joints. Their role is to retain the lubricating grease inside the joint while keeping out road dirt, water and salt. If a boot splits, the precision bearings inside the joint are exposed to contaminants, rapidly leading to failure. On a Volkswagen Golf 2.0 SDI, it is therefore essential to inspect these protective boots regularly. The drive shafts themselves are solid steel shafts, balanced to eliminate running vibrations—vital for a refined drive in a car frequently used for the daily commute.

Common faults and symptoms

There are several telltale signs that the drivetrain on your Volkswagen Golf 2.0 SDI is starting to deteriorate. The most common symptom of a worn outer CV joint on a Volkswagen Golf 2.0 SDI is a rhythmic clicking or knocking noise when cornering on full lock under acceleration, such as during a U-turn or when pulling away at a junction. This noise occurs when the joint's bearings can no longer track smoothly within their races due to wear or lack of grease. If neglected, the joint can seize or fail completely, leaving the vehicle stranded.

Symptoms of a failing inner CV joint on a Volkswagen Golf 2.0 SDI are usually quite different. Here, the defect typically manifests as vibrations throughout the vehicle under acceleration, particularly between 50 and 80 km/h. These vibrations are often felt through the seat or floor rather than the steering wheel. If you notice an imbalance that disappears as soon as you lift off the accelerator, that is a clear sign the inner joint is worn. In addition, always watch for grease splatters on the inside of the wheel rim or wheel arch, which is a definitive indicator of a split boot requiring prompt attention before the joint suffers permanent damage.

Common parts to replace on the Volkswagen Golf 2.0 SDI

For the Volkswagen Golf 2.0 SDI, drivetrain repairs generally involve three main component categories. Depending on the extent of the wear, you can choose to replace either the complete driveshaft assembly or just the damaged joint. Here are the most common parts we supply for this model:

  • Drive shafts: We stock 4 different complete drive shaft assemblies. Replacing the entire shaft is often the most time-efficient option when dealing with widespread wear.
  • Outer CV joints: The most heavily stressed component, frequently requiring replacement after many kilometres of steering angles and road load.
  • Inner CV joints: Replaced less frequently than the outer units, but essential for curing driveline vibrations under load.

Selecting the appropriate category ensures you target your repair precisely where needed. For the Volkswagen Golf 2.0 SDI, it is important to check whether the left or right side needs replacing, as drive shafts often differ in length. Our catalogue is structured so you can readily locate the correct component, whether you need a full drive shaft for your Volkswagen Golf 2.0 SDI or an individual joint. We also recommend inspecting related parts such as wheel bearings whenever the drivetrain is stripped down.

How to find the right part for your Volkswagen Golf 2.0 SDI

Navigate directly to the appropriate section for the Volkswagen Golf 2.0 SDI:

When troubleshooting driveline issues, it pays to start in the exact subcategory. Comparing the specific component categories for the Volkswagen Golf 2.0 SDI makes it straightforward to distinguish between faults in the drive shaft, CV joint or propeller shaft, directing you straight to the section matching your symptoms and fitment.

Once you have selected your part, you can rely on our fitment guarantee. This ensures that the component fits your vehicle correctly when you select your car's exact make, model and engine variant. If you ever feel unsure, our knowledgeable customer support team is on hand to guide you through the technical specifications, helping you complete your repair with confidence and get your car back on the road without delay.

Why shop with cvjoint24.com

CVJoint24 is far from an ordinary car parts retailer; we are a dedicated Swedish specialist with a sharp focus on drivelines and power transmission. For Volkswagen Golf 2.0 SDI owners, this means direct access to technical expertise that general retailers rarely offer. We understand the precise engineering of your vehicle and stock precision-manufactured parts accordingly. Our aim is to help you get the right part on the first attempt, avoiding frustrating returns and unnecessary repair delays.

We provide high-quality components at competitive prices, never compromising on durability. By dispatching quickly across Europe from our central warehouse, we help keep your vehicle off axle stands and back on tarmac as quickly as possible. Combining extensive specialist stock with straightforward vehicle selection and a dependable fitment guarantee, we are the trusted driveline partner for both DIY mechanics and independent workshops. When you order from us, you invest in your vehicle's long-term reliability with backing from true drivetrain specialists.

Frequently asked questions about drivetrain parts for the Volkswagen Golf 2.0 SDI

How do I know whether the outer or inner CV joint has failed on my Golf 2.0 SDI?

A clicking noise on full steering lock usually indicates a worn outer CV joint, whereas vibrations through the car under acceleration typically stem from the inner CV joint.

Do all drive shafts fit the Volkswagen Golf 2.0 SDI regardless of model year?

No, there can be variations in shaft length and spline counts. Always select your exact make, model and engine variant in our vehicle selector to ensure you receive the correct part for your specific year.

Are the CV boot and grease included when I buy a CV joint from you?

Yes, our CV joint kits are supplied complete with a CV boot, grease, clamps and all necessary mounting hardware to ensure a proper installation.

Can I replace just the CV joint instead of the entire drive shaft?

Yes, provided the shaft itself is straight and undamaged, it is usually sufficient to replace only the faulty CV joint, which is a more cost-effective repair.

What does your fitment guarantee mean for my Volkswagen Golf?

It means that if you choose parts matching your car's make, model and engine details, we guarantee the part will fit. In the unlikely event that it does not fit, we will help you source the correct component at no extra cost.

How quickly can I get my spare parts delivered?

We aim for next-day dispatch on all in-stock items, allowing you to get on with your repairs as quickly as possible once a fault is detected.