Volkswagen ID 4 Performance

Spare parts and drivetrain components for the Volkswagen ID 4 Performance. Select your make, model and engine to ensure correct fitment before ordering.

Products for Volkswagen ID 4 Performance

3 products
1 - 3 of 3
Item no.:4125881
  • Position: Rear left
  • Total length: 634 mm
  • Splines gearbox side: 37
  • Splines wheel side: 38
Item no.:5161298
  • Position: Rear right
  • Total length: 859 mm
  • Splines gearbox side: 37
  • Splines wheel side: 38
Item no.:112802
  • Position: Front left
  • Total length: 658 mm
  • Splines gearbox side: 33
  • Splines wheel side: 38

Drivetrain for Volkswagen ID 4 Performance

The Volkswagen ID 4 Performance represents a new era of electric mobility where power transfer takes place with a level of precision and immediacy distinctly different from traditional combustion engines. The drivetrain in this model is engineered to handle the instant torque of the electric motor, meaning every single component must be dimensioned for heavy loads right from a standstill. At CVJoint24, you will find the specific parts required to maintain and repair your Volkswagen ID 4 in its Performance specification. We focus on offering components that meet or exceed original equipment specifications to ensure a long service life and optimal operation.

Owning an electric car means fewer moving parts in the motor, yet the components that actually transmit power to the wheels, such as the drive shafts, are subjected to substantial stress. Selecting the correct spare parts preserves your car's handling dynamics and energy efficiency. Our range is carefully chosen to fit the Performance variant, where we know the requirements for material strength and tolerances are exceptionally demanding. We help you navigate the car parts catalogue smoothly so your car remains in peak condition.

How the drivetrain is designed on the Volkswagen ID 4 Performance

The drivetrain of a Volkswagen ID 4 Performance is centred around an efficient electric motor mounted on the rear axle, or in some configurations twin motors for all-wheel drive. Unlike a vehicle with an internal combustion engine, there is no conventional multi-gear gearbox; instead, a single-speed reduction gearbox transfers drive directly to the wheels via robust drive shafts. This construction allows for a very compact and efficient layout, but it also places high demands on the All car makes drivetrain and its mechanical components to cope with linear power delivery without vibrations or energy loss.

The drive shafts on an ID 4 Performance are critical components connecting the reduction gearbox to the wheel hubs. They must accommodate severe articulation angles during suspension travel and steering while rotating at high speeds. Inner and outer CV joints are protected by CV boots that retain lubricating grease and keep out dirt. Because an electric car is so quiet, the slightest noises from these components quickly become noticeable to the driver, making high-quality replacement parts even more vital for refined comfort.

Common faults and symptoms

Although electric vehicle drivetrains generally demand less maintenance than petrol or diesel equivalents, they are not immune to wear and tear. One of the most typical signs of drivetrain trouble on a Volkswagen ID 4 Performance is vibration under acceleration. Because the electric motor produces maximum torque instantly, worn inner constant velocity joints can cause judder that resonates right through the bodywork. Another frequent symptom is a clicking or knocking sound on full steering lock, which usually indicates an outer CV joint is beginning to fail, often due to a split CV boot that has allowed moisture and grit to enter.

You should also inspect for oil seepage where the drive shafts mate with the reduction gearbox. Even though it is not engine oil, the unit relies on vital lubricants essential for component longevity. If you notice the car feels unstable or produces abnormal noises that vary with road speed, it is high time to inspect the drive shafts. Catching a damaged boot early often saves considerable expense, allowing you to replace merely the boot before the joint itself suffers permanent wear from road dirt and lack of grease.

Common parts to replace on the Volkswagen ID 4 Performance

When repairing the transmission system on this model, driveshafts are the primary focus. Owing to the high output of the Performance model, material fatigue can develop over time, especially under spirited driving. We see growing demand for complete drive shafts, as fitting a complete unit is often a far more cost-effective and quicker solution than rebuilding individual joints. Here are the most relevant categories for your vehicle:

  • Drive shaft Volkswagen ID 4 Performance – complete assemblies for both offside and nearside.
  • CV joint kits – including the joint, CV boot, grease, and fitting hardware.
  • CV boot kits – for preventive maintenance and dependable joint protection.

Replacing an entire drive shaft guarantees that both the inner and outer joints are in factory condition, preventing repeat repairs. For the Volkswagen ID 4 Performance, it is crucial to ensure the replacement component is intended specifically for the Performance chassis, as lengths and splines can differ from standard models. We supply parts precisely manufactured to handle the specific torque curves of your electric vehicle.

How to find the right part for your Volkswagen ID 4 Performance

Proceed to the relevant section for the Volkswagen ID 4 Performance:

When diagnosing drivetrain faults, it is best to navigate straight to the exact category. Comparing the specific subcategories for the Volkswagen ID 4 Performance makes it simple to distinguish between drive shaft, CV joint, or propeller shaft issues, taking you straight to the page matching your symptoms and fitment.

Identifying the correct replacement part for an advanced electric vehicle like the Volkswagen ID 4 Performance calls for exact precision. The most reliable method is to use our vehicle selector to choose your make, model and engine variant. By selecting your exact car, you filter out all components except those technically verified for your specific build. This is particularly important for Volkswagen models, where running technical revisions occur during production years and the Performance package brings dedicated mechanical setups.

Once you view the matching results, cross-reference technical details such as overall length and spline tooth counts against the component fitted to your car. If you are unsure which side requires replacement, keep in mind that the left side represents the nearside (passenger side in the UK) and the right side represents the offside (driver side in the UK) relative to the direction of travel. Should you have any questions, our customer support team is always on hand to assist you across our full catalogue of Volkswagen ID 4 parts. Our goal is to ensure you select the right part first time and avoid unnecessary returns.

Why shop with CVJoint24

CVJoint24 is not merely another general car parts retailer; we are the international shop of a Swedish driveline specialist, operating from our main warehouse in Helsingborg, Sweden. For Volkswagen ID 4 Performance owners, this guarantees access to technical expertise that general suppliers simply cannot match. We understand the engineering requirements of EV drivetrains and stock premium components built to withstand the heavy loads of electric propulsion. With our fitment accuracy, you can order with complete peace of mind.

We dispatch fast orders across the EU, because we understand how vital it is to get your vehicle back on the road without delay. By combining an extensive product range with intuitive vehicle filtering and dedicated customer care, we have become the dependable choice for private motorists and professional garages seeking quality at fair prices. Choose CVJoint24 for accurate fitment, expert technical support, and the confidence of buying from a true drivetrain specialist for your Volkswagen.

Frequently asked questions about the drivetrain for Volkswagen ID 4 Performance

How do I know if the drive shaft on my ID 4 Performance needs replacing?

The most common symptoms are vibrations during acceleration or clicking noises when cornering. As the ID 4 Performance is so quiet, these mechanical noises are often much more noticeable than in a combustion-engined car.

Do all ID 4 drive shafts fit the Performance model?

No, the Performance model can feature reinforced components or different dimensions to manage the higher torque output. Always select your car's make, model and engine to ensure the correct fitment.

Is it more difficult to replace a drive shaft on an electric vehicle like the ID 4?

The mechanical replacement at the wheel hub is similar to conventional cars, but the mounting at the reduction gearbox may require specific tools and extra care around the sealing surfaces.

Do you offer a guaranteed fit on parts for the Volkswagen ID 4 Performance?

Yes, we always provide a fitment guarantee when you choose your specific make, model and engine, giving you complete peace of mind that the part will fit your vehicle.

Why does the drivetrain wear on an electric car?

The instant and high torque delivery of an electric vehicle like the ID 4 Performance places greater stress on drive shafts and CV joints than in a car where power builds up gradually.

Can I replace just the CV boot on my Volkswagen ID 4?

Yes, if you detect damage to the CV boot early before dirt and moisture penetrate the joint, you can replace just the boot to extend the service life of your driveshaft.