Volkswagen ID 5

Spare parts and drivetrain components for the Volkswagen ID 5.

Choose version

Choose a version to refine the results and get closer to the right product.

Products for Volkswagen ID 5

36 products
25 - 36 of 36
Item no.:612125
  • Position: Rear left
  • Splines gearbox side: 42
  • Splines wheel side: 38
  • Total length: 638 mm
Item no.:613016
  • Position: Rear right
  • Splines gearbox side: 42
  • Splines wheel side: 38
  • Total length: 852 mm
Item no.:0575682
  • Position: Outer
  • Inner splines: 28
  • Seal diameter: 59,5 mm
  • Outer splines: 38
  • Total length: 115 mm
Item no.:118184
  • Position: Front left
  • Splines gearbox side: 33
  • Splines wheel side: 38
  • Total length: 663 mm
Item no.:410739
  • Position: Rear left
  • Splines gearbox side: 37
  • Splines wheel side: 38
  • Total length: 634 mm
Item no.:516287
  • Position: Rear right
  • Splines gearbox side: 37
  • Splines wheel side: 38
  • Total length: 859 mm
Item no.:616679
  • Position: Rear left
  • Splines gearbox side: 42
  • Splines wheel side: 38
  • Total length: 638 mm
Item no.:616590
  • Position: Rear right
  • Splines gearbox side: 42
  • Splines wheel side: 38
  • Total length: 852 mm
Item no.:0541838
  • Position: Outer
  • Inner splines: 28
  • Seal diameter: 59,5 mm
  • Outer splines: 38
  • Total length: 115 mm
Item no.:116491
  • Position: Front left
  • Splines gearbox side: 33
  • Splines wheel side: 38
  • Total length: 663 mm
Item no.:619217
  • Position: Rear left
  • Splines gearbox side: 42
  • Splines wheel side: 38
  • Total length: 638 mm
Item no.:618154
  • Position: Rear right
  • Splines gearbox side: 42
  • Splines wheel side: 38
  • Total length: 852 mm
Showing 25–36 of 36 products

Drivetrain for Volkswagen ID 5

The Volkswagen ID 5 represents a new era of electric mobility, combining aerodynamic styling with high performance. The drivetrain in this model is fundamentally different from conventional internal combustion vehicles, placing unique demands on spare parts. As a driveline specialist, we understand the importance of every single component—from the smallest CV boot to the complete drive shaft—working in perfect harmony. The ID 5 is built on Volkswagen’s MEB platform, featuring an optimised weight distribution and a drivetrain engineered for maximum efficiency. Maintaining these parts properly is essential to protect your vehicle’s range and driving dynamics. We offer expert guidance and car parts specifically engineered to withstand the demanding stresses of electric power delivery in harsh European winters.

How the drivetrain is engineered on the Volkswagen ID 5

The drivetrain on the Volkswagen ID 5 centres around its electric drive unit. Depending on whether your car is rear-wheel drive or equipped with all-wheel drive (GTX), power is delivered via one or two compact motor assemblies. Output flows from the electric motor through a single-speed reduction gearbox directly to the road wheels via heavy-duty drive shafts. Because there is no multi-gear transmission, the drive shafts are subjected to continuous, instantaneous torque. Both the inner and outer CV joints are vital components that must endure sharp articulation angles and heavy loads simultaneously. This refined, direct architecture relies on high-precision parts to minimise energy losses and eliminate drivetrain vibrations, which is crucial in an otherwise whisper-quiet electric car.

Common faults and symptoms

Although electric vehicles generally feature fewer moving components, drivetrain parts on the Volkswagen ID 5 remain subject to wear and tear. A typical symptom of a worn outer CV joint is a noticeable clicking noise during sharp turns at low speeds. If you notice vibrations through the steering wheel or seat under brisk acceleration, this often points towards failing inner CV joints. Because the ID 5 develops maximum torque from a dead stop, even minor tears in a CV boot can quickly cause lubricating grease to escape and road grit to enter, destroying the constant velocity joint prematurely. We recommend inspecting the rubber drive shaft boots regularly to avoid expensive damage to the complete shaft assembly and to maintain vehicle reliability.

Common replacement parts for the Volkswagen ID 5

The core component to look after in the power transmission system is undoubtedly the drive shaft. For the Volkswagen ID 5, we provide dedicated solutions tailored to the most frequent maintenance requirements. Our product range includes components in the category Drive shafts for Volkswagen ID 5. These are specifically built to manage the steep torque delivery characteristic of electric drivetrains. Alongside complete shafts, replacement CV boot kits are frequently fitted as a preventative measure. Renewing a split or perished boot promptly can significantly extend the operating life of your existing driveshaft. We supply car parts that match original factory specifications, ensuring safety, balance and long-term durability over many kilometres of driving.

How to find the correct parts for the Volkswagen ID 5

Explore the specific section for your Volkswagen ID 5:

When dealing with a vehicle that has multiple driveline configurations, starting in the right category saves time. By checking the relevant product sections for the Volkswagen ID 5, you can easily distinguish between drive shaft, CV joint or propeller shaft issues and navigate straight to the items matching your symptoms and technical specifications.

Selecting the precise category ensures you quickly identify the exact components required for your repair, fully matched to your vehicle's mechanical setup.

Why buy from CVJoint24?

As a Swedish specialist in All car makes and driveline components, we combine deep technical know-how with an extensive range of parts. We focus exclusively on the vehicle drivetrain, allowing us to provide greater precision and technical support than general car parts retailers. When buying components for your Volkswagen ID 5 from us, you can trust in an accurate fit and OEM-grade quality. We dispatch orders across the European Union from our central warehouse in Helsingborg, Sweden, ensuring prompt delivery. By simply choosing your vehicle’s make, model and engine, both private motorists and professional garages can source dependable drivetrain parts with complete confidence.

Frequently Asked Questions about Drivetrain Parts for the Volkswagen ID 5 – Guaranteed Perfect Fit

How often should I check the drivetrain on my ID 5?

We recommend a visual inspection of the drive shafts and CV boots at every routine service or seasonal tyre change to catch any damage early.

Can I fit a drive shaft from another Volkswagen model?

No, the Volkswagen ID 5 features a dedicated design based on the MEB platform. Always select your car's exact make, model and engine variant to find the correct part.

What are the first signs of a failing drive shaft on an electric car?

Unusual clicking noises when cornering or vibrations under hard acceleration are the most common signs of drivetrain wear.

Do drive shafts for the ID 5 come with everything needed for fitting?

Yes, our complete drive shafts are supplied fully assembled with joints and boots fitted, ready for a straightforward installation.

Why is an exact fit so critical on the ID 5 specifically?

The instant, high torque of electric vehicles demands precise tolerances throughout the drivetrain to avoid premature wear and ensure power is transmitted smoothly to the wheels.