Volkswagen Passat CC 2.0 TDI 4MOTION

Drivetrain components and spare parts for the Volkswagen Passat CC 2.0 TDI 4MOTION. Select your vehicle make, model and engine to ensure an exact fit.

Products for Volkswagen Passat CC 2.0 TDI 4MOTION

32 products
1 - 24 of 32
Item no.:0248790
  • Diameter: 30 mm
  • Hole spacing c/c: 410 mm
  • Bearing thickness: 37 mm
Item no.:0450505
  • Position: Inner
  • Seal diameter: 119 mm
  • Inner splines: 34
Item no.:0496755
  • Position: Inner
  • Seal diameter: 100 mm
  • Inner splines: 33
  • Joint diameter: 100 mm
Item no.:0437802
  • Position: Inner
  • Inner splines: 34
  • Outer splines: 40
Item no.:0518875
  • Position: Outer
  • Seal diameter: 59 mm
  • Inner splines: 27
  • Outer splines: 36
  • Joint diameter: 97,95 mm
Item no.:0260249
  • Number of centre bearings: 1
  • Number of joints: 1
  • Total length: 2,160 mm
Item no.:1164372
  • Position: Front left
  • Flange diameter: 119 mm
  • Total length: 475 mm
  • Splines wheel side: 36
Item no.:2123997
  • Position: Front right
  • Flange diameter: 119 mm
  • Total length: 754 mm
  • Splines wheel side: 36
Item no.:2163000
  • Position: Front right
  • Flange diameter: 119 mm
  • Total length: 555 mm
  • Splines wheel side: 36
Item no.:4144017
  • Position: Rear left
  • Flange diameter: 100 mm
  • Total length: 594 mm
  • Splines wheel side: 36
Item no.:5128700
  • Position: Rear right
  • Flange diameter: 100 mm
  • Total length: 631 mm
  • Splines wheel side: 36
Item no.:143859
  • Position: Front left, Inner
  • Seal diameter: 31 mm
  • Inner splines: 34
  • Outer diameter: 85 mm
  • Splines gearbox side: 26
Item no.:646297
  • Position: Rear, Inner
  • Diameter: 86 mm
  • Splines gearbox side: 33
  • Width: 34 mm
Item no.:654455
  • Position: Rear, Outer
  • Seal diameter: 59 mm
  • Inner splines: 33
  • Outer diameter: 82 mm
  • Splines wheel side: 36
Item no.:626234
  • Position: Rear
  • Diameter: 30 mm
  • Hole spacing c/c: 410 mm
  • Bearing thickness: 37 mm
Item no.:319323
  • Position: Front left
  • Flange diameter: 108 mm
  • Joint diameter: 108 mm
  • Total length: 495 mm
  • Splines wheel side: 36
Item no.:217080
  • Position: Front right
  • Flange diameter: 108 mm
  • Joint diameter: 108 mm
  • Total length: 795 mm
  • Splines wheel side: 36
Item no.:0447624
  • Position: Inner
  • ABS teeth: 0
  • Inner splines: 28
  • Joint diameter: 108 mm
  • Outer diameter: 108 mm
Item no.:344933
  • Position: Inner
  • Seal diameter: 130 mm
  • Inner splines: 34
Item no.:0693879
  • Height: 85 mm
  • Inner diameter: 22 mm
  • Outer diameter: 80 mm
Item no.:0421000
  • Position: Inner
  • Seal diameter: 94 mm
  • Inner splines: 33
  • Number of joints: 3
  • ABS teeth: 0
Item no.:0554244
  • Position: Outer
  • Seal diameter: 59 mm
  • Inner splines: 27
  • Outer splines: 36
  • Joint diameter: 97,95 mm
Item no.:148736
  • Position: Front left, Inner
  • Seal diameter: 31 mm
  • Inner splines: 34
  • Outer diameter: 85 mm
  • Splines gearbox side: 26
Showing 1–24 of 32 products

Drivetrain for Volkswagen Passat CC 2.0 TDI 4MOTION

The Volkswagen Passat CC 2.0 TDI 4MOTION combines elegant coupé styling with capable all-wheel drive. Maintaining the performance and safety provided by the 4MOTION system requires components in top condition. The drivetrain in this specific model is engineered to handle the torque delivered by the 2.0 TDI engine whilst distributing power efficiently across all four wheels. At CVJoint24, you will find a dedicated range of 13 high-quality parts precisely tailored to this vehicle specification. We understand the importance of precision when it comes to power transmission, which is why we only supply car parts that meet or exceed original equipment standards.

Owning an all-wheel-drive car means having more moving components in the drivetrain compared to a two-wheel-drive alternative. This includes everything from the central propeller shaft to the individual drive shafts at each wheel hub. Choosing the correct spare parts ensures not only dependable operation, but also optimal fuel economy and ride comfort. Our focus is on providing the right part at the right price, backed by the expertise that only a specialist in Volkswagen drivetrains can offer.

How the drivetrain is engineered on the Volkswagen Passat CC 2.0 TDI 4MOTION

The drivetrain on a Volkswagen Passat CC 2.0 TDI 4MOTION is a sophisticated system where engine power travels through the gearbox to a transfer box. From here, drive is directed forward to the front axle and rearward via a prop shaft to the rear differential. The 4MOTION system relies on an electronically controlled coupling to regulate torque delivery to the rear wheels depending on road conditions and driving style. This demands that every component, including constant velocity joints and shafts, remains perfectly balanced to prevent vibrations and premature wear on the differentials and gearbox.

At the front, drive shafts fitted with both inner and outer CV joints accommodate steering angles and suspension travel. At the rear, similar driveshafts transfer power from the rear differential to each wheel. Every part of this system must operate in harmony. For instance, play in an inner CV joint can send vibrations running through the entire cabin, whilst a worn propeller shaft often generates distinct droning noises at specific road speeds. Understanding how these parts interact makes it far simpler to pinpoint issues before they cause costly secondary damage.

Common faults and symptoms

There are several clear warning signs when drivetrain components begin to fail on your Volkswagen Passat CC 2.0 TDI 4MOTION. One of the most typical symptoms is a clicking or knocking noise on full steering lock, usually indicating a worn outer CV joint. If you experience shuddering or vibrations through the floorpan under acceleration—particularly at motorway speeds—an inner CV joint or the propeller shaft is frequently the culprit. Because the 4MOTION setup is constantly active, prop shaft imbalance will be felt clearly throughout the vehicle.

Another vital inspection point is the rubber CV boots protecting the joints. If a boot splits, lubricating grease escapes while grit and moisture enter, quickly ruining the precision bearings inside. Regularly checking these flexible covers is essential. On all-wheel-drive models, you should also listen for rumbling noises underneath the car, which often point to play in the prop shaft centre bearing or universal joints. Leaving these symptoms unaddressed risks complete failure and an immobilised vehicle, leading to expensive recovery and repairs.

Common parts to replace on the Volkswagen Passat CC 2.0 TDI 4MOTION

Depending on mileage and driving conditions, certain components face more strain than others on this model. We have structured our range so you can locate what you need quickly for your repair. Here are the most frequently replaced product groups for the Volkswagen Passat CC 2.0 TDI 4MOTION:

  • Drive shaft for Volkswagen Passat CC 2.0 TDI 4MOTION – complete shafts for front and rear fitment (5 parts available).
  • Outer CV joint for Volkswagen Passat CC 2.0 TDI 4MOTION – the most common fix for clicking noises when cornering (2 parts available).
  • Inner CV joint for Volkswagen Passat CC 2.0 TDI 4MOTION – vital for curing vibrations under load and acceleration (3 parts available).
  • Propeller shaft for Volkswagen Passat CC 2.0 TDI 4MOTION – the central component delivering power to the rear axle (2 parts available).

Replacing worn components promptly protects the rest of the drivetrain and guarantees that your 4MOTION system performs reliably in all European driving conditions.

How to find the correct parts for your Volkswagen Passat CC 2.0 TDI 4MOTION

Navigate directly to the appropriate component category for your Volkswagen Passat CC 2.0 TDI 4MOTION:

When diagnosing drivetrain problems, starting in the precise category saves time. By comparing the exact sections for the Volkswagen Passat CC 2.0 TDI 4MOTION, it is easier to distinguish between drive shaft, CV joint, or prop shaft faults and proceed to the parts that match your vehicle's symptoms and fitment.

Finding the right spare parts for an advanced vehicle like the Volkswagen Passat CC 2.0 TDI 4MOTION is straightforward with CVJoint24. Select your vehicle by make, model and engine to display the items engineered specifically for your car's chassis and drivetrain setup. This step is critical on 4MOTION models, as drive shafts and CV joints often differ in overall length and spline counts compared to front-wheel-drive variants.

Once you view the matching parts, we recommend checking the technical dimensions provided, such as the tooth count on the ABS ring or overall shaft length, if multiple options exist. Should you require assistance, our customer service team is ready to verify compatibility. Our objective is to ensure you get the right part the first time, keeping garage downtime to an absolute minimum.

Why buy from CVJoint24?

CVJoint24 is the international shop of a Swedish driveline specialist, dispatching orders across the EU from our central warehouse in Helsingborg, Sweden. Driveline and power transmission components are our sole focus, allowing us to maintain a breadth of stock that general parts factors cannot match for specific models such as the Volkswagen Passat CC 2.0 TDI 4MOTION. We understand the engineering behind all-wheel-drive systems and source our catalogue selectively to guarantee premium quality.

Every purchase is backed by our fitment guarantee when ordered to your car's exact make, model and engine specifications. With fast dispatch across Europe on our stocked inventory, you receive the components you need without unnecessary delay. Combining technical expertise, rapid fulfilment, and accurate fitment, CVJoint24 is the trusted choice for maintaining your Volkswagen.

Frequently Asked Questions about Volkswagen Passat CC 2.0 TDI 4MOTION – Drivetrain & Spare Parts

How do I know whether the outer or inner CV joint has failed on my Passat CC 4MOTION?

A worn outer CV joint typically produces a clicking or snapping noise during sharp turns. A damaged inner CV joint, on the other hand, tends to cause vibrations through the entire vehicle under acceleration, whether driving straight or cornering.

Will drive shafts from a front-wheel-drive Passat fit my 2.0 TDI 4MOTION?

No. The drive shafts on 4MOTION models are specifically engineered to work with the all-wheel-drive differentials, and they often differ in length, dimensions and spline counts compared to front-wheel-drive versions.

What is included when I purchase a CV joint kit from you?

Our CV joint kits are complete and include the CV joint itself, a vehicle-specific CV boot, high-grade grease, circlips, and the necessary clamps for a professional installation.

Can a worn propeller shaft cause vibrations in my Volkswagen Passat CC?

Yes, absolutely. Because the propeller shaft rotates at high speed, even minor imbalance or a worn centre bearing can cause noticeable vibrations through the cabin, particularly at motorway speeds.

How does your fitment guarantee work?

When you select your car's exact make, model and engine variant before ordering, we guarantee that the part will fit. In the unlikely event that it does not, we will help you exchange it for the correct part without any fuss.

How quickly can my spare parts be delivered?

We dispatch all in-stock items quickly from our central warehouse so you receive your parts promptly and can get your car back on the road without unnecessary delay.