Volkswagen Passat CC 2.0 TSI

Spare parts and drivetrain components for Volkswagen Passat CC 2.0 TSI. Verify fitment using your make, model, and engine variant before ordering.

Products for Volkswagen Passat CC 2.0 TSI

33 products
1 - 24 of 33
Item no.:0420017
  • Position: Inner
  • Inner splines: 28
  • Seal diameter: 108 mm
  • Total length: 32 mm
  • Joint diameter: 108 mm
Item no.:0475932
  • Position: Front right, Inner
  • Inner splines: 34
  • Seal diameter: 46 mm
  • Total length: 128,5 mm
  • Joint diameter: 85 mm
Item no.:0585947
  • Position: Outer
  • Inner splines: 27
  • Seal diameter: 59 mm
  • Outer splines: 36
  • Thread size: M16X1,5
Item no.:1181541
  • Position: Front left
  • Splines wheel side: 36
  • Total length: 495 mm
  • Joint diameter: 98 mm
  • Joint diameter, gearbox side: 108 mm
Item no.:2192108
  • Position: Front right
  • Splines wheel side: 36
  • Total length: 795 mm
  • Joint diameter: 98 mm
  • Joint diameter, gearbox side: 108 mm
Item no.:140675
  • Position: Inner
  • Inner splines: 34
  • Seal diameter: 31 mm
  • Total length: 156 mm
  • Joint diameter: 85 mm
Item no.:654398
  • Position: Rear, Outer
  • Inner splines: 33
  • Seal diameter: 59 mm
  • Outer splines: 36
  • Joint diameter: 82 mm
Item no.:1172752
  • Position: Front left
  • Splines gearbox side: 26
  • Splines wheel side: 36
  • Total length: 584 mm
  • Joint diameter: 90 mm
Item no.:1287412
  • Position: Front left
  • Splines gearbox side: 28
  • Splines wheel side: 27
  • Total length: 405 mm
Item no.:2203395
  • Position: Front right
  • Splines gearbox side: 28
  • Splines wheel side: 27
  • Total length: 715 mm
Item no.:341178
  • Position: Front right, Inner
  • Inner splines: 28
  • Seal diameter: 50 mm
  • Total length: 300 mm
  • Joint diameter: 102 mm
Item no.:0473955
  • Position: Inner
  • Inner splines: 33
  • Seal diameter: 100 mm
  • Total length: 34 mm
  • Joint diameter: 100 mm
Item no.:344594
  • Position: Front, Inner
  • Inner splines: 28
  • Seal diameter: 108 mm
  • Total length: 32 mm
  • Joint diameter: 107 mm
Item no.:0950373
  • Inner diameter: 67 mm
  • Outer diameter: 83 mm
Item no.:0647080
  • Position: Rear
  • Total length: 59 mm
Item no.:0684107
  • Total length: 102 mm
Item no.:0968484
  • Inner diameter: 65 mm
  • Outer diameter: 88 mm
Item no.:0660763
  • Total length: 118 mm
Item no.:0650425
  • Total length: 125 mm
Item no.:0983140
  • Inner diameter: 42 mm
  • Outer diameter: 83 mm
Item no.:0633246
  • Total length: 111 mm
Item no.:0986860
  • Inner diameter: 38 mm
  • Outer diameter: 63 mm
Item no.:0970823
  • Inner diameter: 32 mm
  • Outer diameter: 44 mm
Showing 1–24 of 33 products

Drivetrain for Volkswagen Passat CC 2.0 TSI

The Volkswagen Passat CC 2.0 TSI places exacting demands on its mechanical systems, particularly when it comes to the drivetrain and power transmission. As a car with a distinctly sporty character and an engine that produces substantial torque right from low revs, the drive shafts and CV joints are subjected to high stress under acceleration. At CVJoint24, you will find a carefully curated range of components designed specifically to meet these rigorous demands. With an extensive inventory for this exact model variant, we provide the specialist expertise and precision parts needed to keep your vehicle performing at its best. Investing in premium drivetrain components is not just a matter of mechanical reliability, but also of preserving the refined driving dynamics that define the Passat CC. As a dedicated Swedish driveline specialist, we understand the technical nuances of Volkswagen engineering.

How the drivetrain is engineered on the Volkswagen Passat CC 2.0 TSI

The drivetrain layout of the Volkswagen Passat CC 2.0 TSI is a sophisticated piece of engineering designed to balance touring comfort with sharp performance. Power is produced by the turbocharged engine and channelled through either a manual gearbox or a DSG dual-clutch transmission. From the gearbox, power is distributed to the front wheels via heavy-duty drive shafts. If your vehicle features 4Motion all-wheel drive, the setup also includes a propeller shaft running down the length of the vehicle to a rear differential. Each drive shaft relies on an inner CV joint closest to the gearbox to absorb axial movement, and an outer CV joint at the wheel hub to accommodate steering articulation. These components operate in unison to handle suspension travel and steer angles smoothly, without power loss or unwanted vibration. Precision engineering is vital here, as even the slightest imbalance can resonate through the chassis, degrading ride comfort and wearing adjacent suspension components prematurely.

Common faults and symptoms

Spotting drivetrain issues early can save both time and money. On the Volkswagen Passat CC 2.0 TSI, there are specific warning signs to watch out for. One of the most typical indicators is a rhythmic clicking or snapping noise when cornering on full lock, which almost always points to a worn outer CV joint. Conversely, if you notice strong vibrations or juddering through the vehicle under acceleration that disappear once you lift off the accelerator, an inner constant velocity joint is commonly at fault. Another frequent problem is a split CV boot; these rubber gaiters retain the lubricating grease and keep out contaminants. Once a boot tears, road grime enters and the joint degrades rapidly. On all-wheel-drive models, the prop shaft can also generate a low-frequency hum or continuous vibration if the centre bearing or universal joints begin to wear out. Routine inspection of these components is your best defence against costly breakdowns.

Common parts to replace on the Volkswagen Passat CC 2.0 TSI

In our range for the Volkswagen Passat CC 2.0 TSI, we have structured our categories to make finding the right repair solution straightforward. Many customers opt to replace the complete drive shaft assembly rather than rebuilding a single joint, which frequently reduces workshop labour costs and gives you a brand-new unit with fresh boots and bearings. Our stock includes the following categories:

  • Drive shafts: We supply several complete drive shaft options tailored for both the offside and nearside, as well as distinct gearbox variants.
  • Outer CV joints: For targeted repairs, we provide outer joints supplied complete with all necessary fitting hardware and grease.
  • Inner CV joints: We offer 3 different inner CV joints, essential for eliminating driveline vibrations under load.
  • Propeller shafts: For 4Motion variants, we stock 2 high-grade propeller shafts to restore smooth, vibration-free power transfer to the rear axle.

By fitting the correct part from the outset, you ensure your Volkswagen retains its factory performance, safety, and longevity over many miles.

Finding the right part for your Volkswagen Passat CC 2.0 TSI

Navigate directly to the relevant subcategory for your Volkswagen Passat CC 2.0 TSI:

When troubleshooting driveline issues, selecting the correct category first simplifies your repair. Comparing the exact component sections for the Volkswagen Passat CC 2.0 TSI helps you isolate whether you need a drive shaft, a CV joint, or a prop shaft, leading straight to the parts matching your symptoms and technical specifications.

We also advise verifying whether your car has a manual or automatic transmission, as this often determines driveshaft lengths and spline configurations. If you are ever unsure, our technical support team is readily available to assist with component specifications. Our priority is ensuring that the part you order fits your vehicle accurately right out of the box.

Why shop at CVJoint24

Choosing CVJoint24 means partnering with an established Swedish specialist focused exclusively on driveline systems. We are not a generalist motor factor; our dedicated technical expertise allows us to provide high-quality replacement parts specifically tailored for your Volkswagen Passat CC 2.0 TSI. Backed by rigorous quality control and accurate fitment data, you can rely on every component to meet demanding standards. When drivetrain components fail, prompt dispatch is vital; operating from our central warehouse in Helsingborg, Sweden, we supply customers efficiently throughout the EU. Our specialised approach delivers personal service and in-depth technical knowledge that general retailers often lack. Whether you are a DIY mechanic or running a professional workshop, we are here to provide the right part to get your vehicle driving safely and smoothly again.

Frequently Asked Questions about Drivetrain Parts for Volkswagen Passat CC 2.0 TSI

How do I know if my Passat CC 2.0 TSI needs a new drive shaft?

The most common signs are vibrations under acceleration or noises when cornering. If the vibrations cease as soon as you lift off the accelerator, it is often the inner joint or the shaft itself that is worn.

Does the same CV joint fit both manual and DSG gearboxes?

No, specifications can differ between gearbox types. Always select your car's exact make, model and engine to ensure you get the correct part for your specific configuration.

What is the difference between an inner and an outer CV joint?

The outer CV joint sits at the wheel and accommodates steering angles, whereas the inner joint sits by the gearbox and absorbs the vehicle's suspension movements in the longitudinal direction.

How often should I inspect the CV boots on my Volkswagen?

We recommend a visual inspection at every service or wheel change. A split CV boot quickly leads to constant velocity joint failure due to ingress of dirt and loss of grease.

Can I replace just the CV joint instead of the complete drive shaft?

Yes, this is entirely possible if the shaft itself is undamaged. We supply both individual CV joints and complete drive shafts, depending on what is most cost-effective for your repair.

Do you stock parts for Passat CC models with 4Motion four-wheel drive?

Yes, we have a dedicated range for 4Motion models, including propeller shafts and matched drive shafts for both the front and rear axles.