Volkswagen Passat Variant 1.8 Syncro

Car parts and drivetrain components for Volkswagen Passat Variant 1.8 Syncro. Always check the fit before ordering.

Products for Volkswagen Passat Variant 1.8 Syncro

13 products
1 - 13 of 13
Item no.:1138757
  • Position: Front left
  • Flange diameter: 100 mm
  • Total length: 615 mm
  • Splines wheel side: 33
  • ABS teeth: 45
Item no.:2195311
  • Position: Front right
  • Flange diameter: 100 mm
  • Total length: 636 mm
  • Splines wheel side: 33
  • ABS teeth: 45
Item no.:0458204
  • Position: Inner
  • Seal diameter: 100 mm
  • Inner splines: 33
  • Joint diameter: 100 mm
Item no.:0581824
  • Position: Outer
  • ABS teeth: 45
  • Seal diameter: 53 mm
  • Inner splines: 30
  • Outer splines: 33
Item no.:1150148
  • Position: Front left
  • Flange diameter: 108 mm
  • Total length: 609 mm
  • Splines wheel side: 33
  • ABS teeth: 45
Item no.:2102571
  • Position: Front right
  • Flange diameter: 108 mm
  • Total length: 630 mm
  • Splines wheel side: 33
  • ABS teeth: 45
Item no.:0383753
  • ABS teeth: 45
  • Inner diameter: 64 mm
  • Outer diameter: 74 mm
  • Width: 8,1 mm
Item no.:0338328
  • ABS teeth: 45
  • Inner diameter: 77 mm
  • Outer diameter: 81 mm
  • Width: 11 mm
Item no.:335352
  • Position: Front
  • ABS teeth: 45
  • Inner diameter: 64 mm
  • Outer diameter: 74 mm
  • Width: 8,1 mm
Item no.:0613307
  • Position: Front
  • Diameter: 84 mm
  • Outer diameter: 23 mm
Item no.:0409480
  • Position: Inner
  • ABS teeth: 0
  • Inner splines: 28
  • Joint diameter: 108 mm
  • Outer diameter: 108 mm
Item no.:6123049
  • Position: Rear left, Rear right
  • Flange diameter: 100 mm
  • Total length: 618 mm
  • Splines wheel side: 33
  • ABS teeth: 45
Item no.:0332573
  • ABS teeth: 45
  • Inner diameter: 77 mm
  • Outer diameter: 81 mm
  • Width: 11 mm

Frequently Asked Questions about Drivetrain Parts for Volkswagen Passat Variant 1.8 Syncro

How do I know if my Passat 1.8 Syncro needs a new drive shaft?

The most common signs are heavy vibrations under acceleration or unusual noises coming from underneath the vehicle. Because the Syncro features four-wheel drive, you should inspect both the front and rear shafts if you experience an imbalance.

Do CV joints from a standard front-wheel-drive Passat fit a Syncro?

Usually not. The Syncro version often features specific dimensions and mountings engineered to handle the four-wheel-drive system. Always select your vehicle by make, model and engine to ensure you get the exact parts designed for the 1.8 Syncro variant.

Why is the ABS warning light on in my Volkswagen Passat Variant?

A very common fault is a cracked ABS ring caused by corrosion. This breaks the signal to the sensor. We stock 3 different ABS rings for the 1.8 Syncro to cover the various versions fitted to this model.

What is the difference between an inner and an outer CV joint?

The outer CV joint sits at the wheel and allows for steering movement, whilst the inner joint sits at the gearbox or differential and accommodates length changes in the shaft as the suspension travels. Failing outer joints typically produce clicking noises when turning, whereas worn inner joints cause vibrations.

Is everything I need included in a CV joint kit?

Yes, when you buy a CV joint from us, it normally includes the joint itself, a vehicle-specific CV boot, specialised grease, circlips and clamps so that you can carry out a complete replacement straight away.

How quickly can I get my parts delivered?

We aim to dispatch promptly on working days so that your parts arrive swiftly, getting your Volkswagen Passat Variant 1.8 Syncro back on the road without delay.