Volkswagen Passat Variant 2.0 TSI

Spare parts and drivetrain components for Volkswagen Passat Variant 2.0 TSI. Verify fitment by vehicle make, model and engine before ordering.

Products for Volkswagen Passat Variant 2.0 TSI

33 products
1 - 24 of 33
Item no.:0533266
  • Position: Outer
  • Inner splines: 27
  • Seal diameter: 59 mm
  • Outer splines: 36
  • Thread size: M16X1,5
Item no.:650008
  • Position: Rear, Outer
  • Inner splines: 33
  • Seal diameter: 59 mm
  • Outer splines: 36
  • Joint diameter: 82 mm
Item no.:0432867
  • Position: Front right, Inner
  • Inner splines: 34
  • Seal diameter: 46 mm
  • Total length: 128,5 mm
  • Joint diameter: 85 mm
Item no.:0412898
  • Position: Inner
  • Inner splines: 28
  • Seal diameter: 108 mm
  • Total length: 32 mm
  • Joint diameter: 108 mm
Item no.:2123636
  • Position: Front right
  • Splines wheel side: 36
  • Total length: 795 mm
  • Joint diameter: 98 mm
  • Joint diameter, gearbox side: 108 mm
Item no.:0401905
  • Position: Inner
  • Inner splines: 33
  • Seal diameter: 100 mm
  • Total length: 34 mm
  • Joint diameter: 100 mm
Item no.:7309621
  • Position: Inner
  • Inner splines: 33
  • Seal diameter: 94 mm
  • Total length: 32 mm
  • Joint diameter: 94 mm
Item no.:348242
  • Position: Front, Inner
  • Inner splines: 28
  • Seal diameter: 108 mm
  • Total length: 32 mm
  • Joint diameter: 107 mm
Item no.:0929501
  • Inner diameter: 67 mm
  • Outer diameter: 83 mm
Item no.:0681850
  • Position: Rear
  • Total length: 59 mm
Item no.:0624054
  • Total length: 102 mm
Item no.:0631929
  • Total length: 125 mm
Item no.:0685736
  • Total length: 111 mm
Item no.:313151
  • Position: Front left
  • Splines wheel side: 36
  • Total length: 495 mm
  • Joint diameter: 98 mm
  • Joint diameter, gearbox side: 108 mm
Item no.:114832
  • Position: Front left
  • Splines wheel side: 36
  • Total length: 492 mm
  • Joint diameter: 98 mm
  • Flange diameter: 119 mm
Item no.:347088
  • Position: Front right, Inner
  • Inner splines: 28
  • Seal diameter: 50 mm
  • Total length: 300 mm
  • Joint diameter: 102 mm
Item no.:315787
  • Position: Front right
  • Splines wheel side: 36
  • Total length: 798 mm
  • Joint diameter: 90 mm
  • Joint diameter, gearbox side: 100 mm
Item no.:313154
  • Position: Front
  • Splines wheel side: 36
  • Total length: 480 mm
  • Joint diameter: 110 mm
  • ABS teeth: 28
Item no.:3591100
  • Position: Front, Outer
  • Inner splines: 33
  • Seal diameter: 59 mm
  • Outer splines: 36
  • Thread size: M16X1,5
Item no.:0642617
  • Total length: 120 mm
Item no.:347127
  • Position: Front, Inner
  • Inner splines: 34
  • Seal diameter: 119 mm
  • Total length: 78 mm
  • Joint diameter: 119 mm
Showing 1–24 of 33 products

Drivetrain for Volkswagen Passat Variant 2.0 TSI

The Volkswagen Passat Variant 2.0 TSI combines everyday practicality with robust engine performance. Its turbocharged 2.0 TSI petrol engine delivers plenty of torque low down in the rev range, offering a responsive drive while putting the car's drivetrain under steady mechanical strain. The transmission and driveline system forms the vital link ensuring that every ounce of power reaches the tarmac predictably. To maintain performance, roadholding and safety, precision-engineered parts matched to this specific engine code are essential. Choosing the right replacement parts for your Volkswagen Passat Variant is not just about keeping the car on the road, but about safeguarding the refined driving dynamics the estate is renowned for. We supply parts that meet or exceed original equipment specifications, ensuring long-lasting reliability in all driving conditions.

How the drivetrain is engineered on the Volkswagen Passat Variant 2.0 TSI

The drivetrain setup on a Volkswagen Passat Variant 2.0 TSI is engineered to balance performance with smooth refinement. The system originates at the gearbox, which directs torque outwards to the drive shafts. Each drive shaft comprises a solid steel shaft fitted with constant velocity joints at either end. The inner CV joint, mounted to the gearbox, is usually a plunge joint that accommodates axial movement as the suspension articulates over road imperfections. The outer CV joint sits at the wheel hub, handling the intricate task of transmitting power while permitting the angles necessary for steering. For the high-output 2.0 TSI unit, these parts are often reinforced to withstand substantial thermal and mechanical stress. The entire assembly is shielded by durable CV boots packed with specialised grease, which prevent friction, moisture ingress and premature wear.

Common faults and symptoms

Identifying drivetrain issues early saves both time and expensive repair bills. For owners of a Volkswagen Passat Variant 2.0 TSI, there are several key warning signs to listen and feel for. The most typical sign of a worn outer CV joint is a rhythmic clicking or knocking noise on full steering lock, such as when negotiating tight corners or manoeuvring into a parking space. If the noise disappears once the steering wheel straightens up, the outer joint is almost always the cause. Vibrations felt through the floorpan or seats under acceleration, particularly between 70 and 100 km/h, frequently point to play in an inner CV joint. Grease splattered across the inner wheel rim or suspension housing signals a split CV boot. If left unattended, grit penetrates the joint, causing rapid wear and eventual failure that could leave you stranded.

Common parts to replace on the Volkswagen Passat Variant 2.0 TSI

When repairs are due, several approaches are available depending on the extent of wear and your car's mileage. For the Volkswagen Passat Variant 2.0 TSI, our range covers everything from individual repair kits to complete assemblies. A complete drive shaft is often the most cost-effective, straightforward repair during major servicing, as it arrives with brand new inner and outer joints pre-assembled. Key components for this model include:

  • Drive shafts for Volkswagen Passat Variant 2.0 TSI: A complete replacement assembly when both inner and outer joints as well as the shaft require renewal for lasting peace of mind.
  • Outer CV joints for Volkswagen Passat Variant 2.0 TSI: The most frequent wear item, subject to continuous steering angles and road grit.
  • Inner CV joints for Volkswagen Passat Variant 2.0 TSI: Often the hidden culprit behind annoying vibrations under engine load.

Replacing worn components promptly prevents secondary damage to wheel bearings and gearbox seals, saving money over time. Well-maintained driveline parts safeguard your vehicle's reliability and resale value.

Find the right part for your Volkswagen Passat Variant 2.0 TSI

Navigate directly to the subcategory for your Volkswagen Passat Variant 2.0 TSI:

With several possible sources of driveline noise or play, targeting the right section saves diagnostic time. Comparing the exact component categories for the Volkswagen Passat Variant 2.0 TSI helps you distinguish between faults in the drive shaft, CV joints or prop shaft, leading you directly to the correct fitment.

Selecting automotive spares can be intricate, particularly for an advanced vehicle like the Volkswagen Passat Variant 2.0 TSI. Variations exist depending on production year, gearbox specification (manual or DSG), and whether the car is front-wheel drive or equipped with 4MOTION all-wheel drive. To find exact-fit components on cvjoint24.com, simply filter by your vehicle's make, model, and engine variant. You will be shown only the driveshafts and constant velocity joints designed for your vehicle's setup. For added assurance, we recommend verifying technical specifications such as inner and outer spline counts, especially on model transition years. Our product details and customer support team are available to help confirm exact measurements before ordering, ensuring an effortless installation in the garage.

Why shop at cvjoint24.com

Choosing cvjoint24.com connects you with an experienced Swedish driveline specialist. Operating from our central warehouse in Helsingborg, Sweden, we supply customers throughout the European Union with an extensive inventory engineered to handle demanding road conditions. When a driveline part fails, we understand that you need dependable replacements without delay, which is why we provide swift European dispatch and reliable logistics. We stand by our fitment accuracy, offering premium replacement car parts that match factory dimensions. Whether you are a professional garage technician or a DIY mechanic, our dedicated team is here to provide knowledgeable advice, first-rate build quality and dependable parts that keep your Volkswagen Passat running smoothly.

Frequently asked questions about drivetrain parts for Volkswagen Passat Variant 2.0 TSI

How do I know if the drive shaft on my Passat 2.0 TSI is damaged?

Common signs include clicking noises when turning sharply (outer CV joint) or vibrations through the chassis during acceleration (inner CV joint).

Can I replace just the CV joint, or do I need to replace the entire drive shaft?

It depends on the extent of the damage. Often, replacing just the outer or inner joint is enough, but in the case of extensive wear, a complete drive shaft is usually more cost-effective.

Does the same CV joint fit all Passat Variant models?

No, the 2.0 TSI engine often has specific requirements regarding dimensions and splines. Always select your car's make, model and engine to ensure you get the correct part for your variant.

What causes vibrations under acceleration on my Volkswagen Passat?

Vibrations are frequently caused by wear or play in the inner CV joint, creating an imbalance in power transmission from the gearbox.

How important is it to replace a damaged CV boot quickly?

Crucial. A split or damaged CV boot allows dirt and water to enter, which quickly ruins the bearing surfaces of the CV joint and leads to a much more costly replacement.

Why should I choose CVJoint24 for my spare parts?

We are Swedish driveline specialists focusing on precise fitment, fast dispatch and in-depth technical expertise for your car's drivetrain.