Volkswagen Passat Variant 2.5 TDI Syncro

Spare parts and drivetrain components for Volkswagen Passat Variant 2.5 TDI Syncro. Confirm exact fitment by selecting your make, model and engine.

Products for Volkswagen Passat Variant 2.5 TDI Syncro

21 products
1 - 21 of 21
Item no.:1104152
  • Position: Front left
  • Flange diameter: 130 mm
  • Total length: 625 mm
  • Splines wheel side: 38
  • ABS teeth: 45
Item no.:4129775
  • Position: Rear left
  • Flange diameter: 130 mm
  • Total length: 526 mm
  • Splines wheel side: 38
  • ABS teeth: 45
Item no.:2104437
  • Position: Front right
  • Flange diameter: 130 mm
  • Total length: 500 mm
  • Splines wheel side: 38
  • ABS teeth: 45
Item no.:0405465
  • Position: Inner
  • Seal diameter: 130 mm
  • Inner splines: 34
Item no.:0441515
  • Position: Inner
  • Seal diameter: 100 mm
  • Inner splines: 33
  • Joint diameter: 100 mm
Item no.:0560549
  • Position: Outer
  • ABS teeth: 45
  • Seal diameter: 59 mm
  • Inner splines: 27
  • Outer splines: 38
Item no.:0517596
  • Position: Outer
  • ABS teeth: 45
  • Seal diameter: 53 mm
  • Inner splines: 30
  • Outer splines: 33
Item no.:1117338
  • Position: Front left
  • Flange diameter: 130 mm
  • Total length: 602 mm
  • Splines wheel side: 38
  • ABS teeth: 45
Item no.:6146600
  • Position: Rear left, Rear right
  • Flange diameter: 100 mm
  • Total length: 618 mm
  • Splines wheel side: 33
  • ABS teeth: 45
Item no.:0323592
  • ABS teeth: 45
  • Inner diameter: 77 mm
  • Outer diameter: 81 mm
  • Width: 11 mm
Item no.:332818
  • Position: Front
  • ABS teeth: 45
  • Inner diameter: 77 mm
  • Outer diameter: 81 mm
  • Width: 11 mm
Item no.:0679409
  • Position: Front
  • Diameter: 91 mm
  • Outer diameter: 24 mm
Item no.:219836
  • Position: Front right
  • Diameter: 86 mm
  • Flange diameter: 100 mm
  • Total length: 640 mm
  • ABS teeth: 45
Item no.:111028
  • Position: Front left
  • Flange diameter: 130 mm
  • Total length: 601 mm
  • Splines wheel side: 38
  • ABS teeth: 45
Item no.:118152
  • Total length: 600 mm
  • Splines wheel side: 38
Item no.:314558
  • Total length: 625 mm
  • Splines wheel side: 38
  • ABS teeth: 45
Item no.:341265
  • Position: Front, Inner
  • Inner splines: 34
Item no.:0523725
  • Position: Outer
  • ABS teeth: 45
  • Seal diameter: 60 mm
  • Inner splines: 30
  • Outer splines: 38
Item no.:0377170
  • ABS teeth: 45
  • Inner diameter: 77 mm
  • Outer diameter: 81 mm
  • Width: 11 mm
Item no.:0636528
  • Inner diameter: 24 mm
  • Total length: 92 mm
Item no.:314270
  • Total length: 625 mm
  • Splines wheel side: 38

Drivetrain for Volkswagen Passat Variant 2.5 TDI Syncro

The Volkswagen Passat Variant 2.5 TDI Syncro combines practical space with a muscular V6 diesel engine and an advanced all-wheel-drive system. To retain the stability and traction that the Syncro system provides, every single drivetrain component must operate without fault. The drivetrain on this specific model is engineered to handle substantial torque, which means components such as drive shafts and CV joints endure severe stress over the vehicle's lifespan. With us, you will find an extensive range tailored specifically to this engine and drive combination.

Owning a 2.5 TDI Syncro means valuing dependable operation in all weather conditions. Because the system divides power between the front and rear axles, keeping every mechanical component in peak condition is vital. Worn parts not only create annoying noises, but also compromise handling and fuel economy. We focus on providing parts that meet or exceed original equipment specifications, ensuring your Volkswagen remains as reliable as the day it left the factory.

How the drivetrain is engineered on Volkswagen Passat Variant 2.5 TDI Syncro

The drivetrain on the Volkswagen Passat Variant 2.5 TDI Syncro uses a longitudinal engine layout, typical for this generation of Passat when fitted with larger engine options. Power from the 2.5-litre V6 diesel travels through the gearbox to a central differential, which distributes drive to both the front and rear axles. This demands a robust set of drive shafts front and rear to cope with constant torque delivery. Unlike front-wheel-drive models, the Syncro estate features a more sophisticated rear suspension assembly with its own dedicated driveshafts and joints.

Each drive shaft is equipped with two joints: an inner CV joint mounted at the gearbox or differential, and an outer CV joint located at the wheel hub. The outer joint must handle both power transmission and steering angles, while the inner joint accommodates the axial plunge created as the suspension moves. On the Syncro model, precision tolerances in these components are crucial to prevent vibrations throughout the four-wheel-drive system. Furthermore, ABS reluctor rings play a critical role by supplying the vehicle's safety electronics with exact wheel-speed data.

Common faults and symptoms

There are several distinct signs indicating that drivetrain components on your Volkswagen Passat Variant 2.5 TDI Syncro are wearing out. One of the most frequent symptoms is a clicking or knocking sound heard when cornering sharply at low speeds. This typically points to a worn outer CV joint for Volkswagen Passat Variant 2.5 TDI Syncro, or a split CV boot that has allowed road grit to enter the bearing raceway. If ignored, the constant velocity joint can ultimately fail completely, causing an immediate loss of drive.

Vibrations under acceleration, especially at higher road speeds or under heavy load, frequently point to an issue with an inner CV joint for Volkswagen Passat Variant 2.5 TDI Syncro. Because the 2.5 TDI engine produces high torque, inner joints suffer premature wear if you frequently tow or carry heavy loads. Another regular complaint is the ABS warning light illuminating, or the ABS pulsating during gentle braking. This is often caused by a cracked or corroded ABS ring for Volkswagen Passat Variant 2.5 TDI Syncro, which disrupts the sensor's pulse signal.

Common replacement parts for Volkswagen Passat Variant 2.5 TDI Syncro

Depending on driving style and mileage, certain parts are ordered more frequently for this model. We have structured our catalogue so you can navigate straight to the right category. Here are the most sought-after component groups for your car:

  • Drive shaft for Volkswagen Passat Variant 2.5 TDI Syncro – Complete assemblies for quick and straightforward replacement.
  • Outer CV joint for Volkswagen Passat Variant 2.5 TDI Syncro – To eliminate clicking sounds on full steering lock.
  • Inner CV joint for Volkswagen Passat Variant 2.5 TDI Syncro – The reliable fix for shudder under acceleration.
  • ABS ring for Volkswagen Passat Variant 2.5 TDI Syncro – Essential for restoring proper ABS and stability functions.

Replacing worn components promptly prevents secondary damage to other expensive parts in the drivetrain system. A split CV joint boot left unaddressed will quickly ruin the entire joint, turning a minor maintenance job into an expensive repair. We always advise checking every drive shaft boot thoroughly at each scheduled service to catch early splits before grease is lost.

Finding the right part for Volkswagen Passat Variant 2.5 TDI Syncro

Navigate directly to the relevant sub-category for your Volkswagen Passat Variant 2.5 TDI Syncro:

On an all-wheel-drive car with multiple possible drivetrain issues, pinpointing the correct category immediately is sensible. By comparing the exact sections for the Volkswagen Passat Variant 2.5 TDI Syncro, it becomes much easier to distinguish between drive shaft, CV joint or propeller shaft faults, taking you straight to the products that match your car's symptoms and fitment.

Selecting the right spare part for a specific model like the 2.5 TDI Syncro can occasionally be tricky, as variations exist depending on chassis number or production month. To make your selection straightforward and accurate, our vehicle selector allows you to filter by make, model and engine variant. This isolates the exact 12 products verified for your car's drivetrain configuration, eliminating misorders and saving valuable time in the garage.

When looking for parts for your Volkswagen Passat Variant, always confirm key technical details, such as the ABS ring tooth count or CV joint spline count, if you are purchasing individual components. Our customer service team and detailed technical product pages provide all the specifications required to get it right first time. With our dedicated driveline expertise, you can order with absolute confidence that every component will fit accurately and perform reliably.

Why shop with CVJoint24

CVJoint24 is your dedicated specialist for vehicle driveline parts. As the international shop of a Swedish driveline specialist, we have accumulated decades of technical experience and a catalogue that covers even complex models such as the Volkswagen Passat Variant 2.5 TDI Syncro. We appreciate that getting parts quickly is essential to keep downtime to an absolute minimum, backing every order with rigorous quality standards and dispatch straight from our central warehouse.

We provide a reliable fitment guarantee across our range so you can make your purchase with total peace of mind. Simply select your car's make, model and engine, and we guarantee the part fits or we will help you find the correct match. CVJoint24 is the trusted choice for both professional garages and DIY mechanics looking for specialist expertise, premium build quality and prompt delivery across the EU.

Frequently Asked Questions about the Volkswagen Passat Variant 2.5 TDI Syncro

Which driveline components most commonly need replacing on a Passat 2.5 TDI Syncro?

The most common parts are outer CV joints, inner CV joints and ABS rings. Due to the high torque of the 2.5 TDI engine and the loads placed by the Syncro four-wheel-drive system, these components wear faster than on standard models.

How do I know if the ABS ring is broken on my Volkswagen Passat?

Common symptoms include an illuminated ABS warning light or the ABS pulsating during low-speed braking on dry surfaces. A visual inspection will often reveal cracks or severe corrosion on the ring.

Does the same drive shaft fit both the front and rear axles on a Syncro?

No, the front and rear drive shafts differ in both length and design. It is therefore essential to select your exact vehicle specifications to ensure you choose the correct axle position for your repair.

Why does my car vibrate under acceleration?

Vibrations under load are often caused by worn inner CV joints. On a four-wheel-drive vehicle like the Syncro, it can also stem from issues with the propeller shaft or its centre bearing, but worn inner joints are a very common cause.

Can I replace just the CV joint, or do I need to replace the complete drive shaft?

It is often possible to replace just the CV joint if the shaft itself is undamaged. We offer both individual CV joints and complete drive shafts so you can choose the solution that best fits your needs and budget.

How quickly do you deliver parts for my Volkswagen Passat Variant?

We offer fast delivery across Europe on our stocked items. Place your order in time and your parts are dispatched promptly so you can get your repair underway as quickly as possible.