Volkswagen Passat 2.0 FSI 4MOTION

Spare parts and drivetrain components for the Volkswagen Passat 2.0 FSI 4MOTION. Select your exact model and engine before ordering.

Products for Volkswagen Passat 2.0 FSI 4MOTION

36 products
25 - 36 of 36
Item no.:0637479
  • Total length: 111 mm
Item no.:0926244
  • Inner diameter: 38 mm
  • Outer diameter: 63 mm
Item no.:0983120
  • Inner diameter: 32 mm
  • Outer diameter: 44 mm
Item no.:0600660
  • Position: Front
  • Total length: 107 mm
  • Height: 112 mm
Item no.:0921844
  • Inner diameter: 61 mm
  • Outer diameter: 74 mm
Item no.:0909998
  • Inner diameter: 38 mm
  • Outer diameter: 74 mm
Showing 25–36 of 36 products

Drivetrain for Volkswagen Passat 2.0 FSI 4MOTION

The Volkswagen Passat 2.0 FSI 4MOTION is a car that combines comfort with the extra traction provided by four-wheel drive. For this system to operate at its best, every part of the drivetrain must be in top condition. Power transmission in a 4MOTION vehicle is significantly more complex than in a front-wheel-drive variant, as it involves more moving parts such as a central propeller shaft and rear drive shafts. Here at CVJoint24, you will find a dedicated range developed to meet the technical requirements of this specific engine and drivetrain configuration.

Maintaining the drivetrain on a Passat with 4MOTION is vital to prevent expensive secondary damage to differentials and four-wheel-drive couplings. Because the 2.0 FSI engine delivers its power linearly, it is essential that CV joints and shafts can handle the load without play. We focus on offering components that match or exceed original quality, giving you complete peace of mind. Choosing the right parts ensures the car's intelligent all-wheel-drive system distributes power exactly as intended from the factory.

How the drivetrain works on the Volkswagen Passat 2.0 FSI 4MOTION

The drivetrain on a Volkswagen Passat 2.0 FSI 4MOTION is built around a transverse engine that feeds power through a gearbox to a front differential. From there, power is distributed to the front wheels via front drive shafts. What distinguishes the 4MOTION system is the bevel gear unit (transfer box) that directs power rearwards via a multi-piece propeller shaft. This shaft runs along the underside of the car and is supported by centre bearings to minimise vibrations and imbalance while driving. At the rear axle, an electronically controlled coupling regulates how much torque is sent to the rear wheels.

The rear drive shafts on this model feature a unique design compared to the front units, both in terms of length and joint dimensions. Each driveshaft consists of an inner and an outer CV joint protected by rubber CV boots. These boots are critical, as they retain the lubricating grease while keeping out dirt and water. On a 4MOTION car, the inner joints are often subjected to heavy stress under hard acceleration, making the high-grade materials in our spare parts essential for long-term durability and reliability.

Common faults and symptoms

One of the most frequent signs of drivetrain trouble on a Passat 2.0 FSI 4MOTION is a clicking or knocking noise on full steering lock. This usually indicates that an outer constant velocity joint is worn. If you experience vibrations through the car body under acceleration instead, especially between 50 and 80 km/h, the inner CV joints have often developed play. Because the 4MOTION system puts load on all four joints, pinpointing exactly which side is at fault can sometimes be difficult without a thorough inspection.

For vehicles with a prop shaft, a typical symptom of wear is a high-frequency vibration felt through the car floor or seats. This is often caused by a failing centre bearing or universal joint. If you notice grease spots under the car around the drive shaft mountings, a split boot is usually to blame; once grease leaks out, the joint quickly fails due to friction and dirt ingress. Acting promptly on these symptoms saves substantial money by avoiding the need to replace the complete shaft assembly.

Common parts to replace on the Volkswagen Passat 2.0 FSI 4MOTION

To help you find what you need quickly, we have grouped our parts based on your car's specific requirements. Here are the key component categories for your Volkswagen Passat 2.0 FSI 4MOTION:

  • Drive shaft for Volkswagen Passat 2.0 FSI 4MOTION – We stock several options to suit the exact requirements of both front and rear axles.
  • Outer CV joint for Volkswagen Passat 2.0 FSI 4MOTION – The crucial component for smooth power delivery while steering.
  • Inner CV joint for Volkswagen Passat 2.0 FSI 4MOTION – We supply 4 specific inner joints that resolve driveline vibration issues.
  • Propeller shaft for Volkswagen Passat 2.0 FSI 4MOTION – Central power delivery to the rear axle, available in 2 balanced versions.

Clicking the links above takes you straight to the verified products for your model. We always recommend checking the condition of the drive shaft boots whenever you service or replace suspension components, as an inexpensive boot can save a costly CV joint.

How to find the right part for your Volkswagen Passat 2.0 FSI 4MOTION

Continue to the relevant product section for your Volkswagen Passat 2.0 FSI 4MOTION:

On a vehicle with several possible drivetrain faults, it pays to start in the correct category straight away. Comparing the exact component sections for the Volkswagen Passat 2.0 FSI 4MOTION makes it easier to tell whether the issue lies in a drive shaft, a CV joint or the prop shaft, and to head directly to the page that best matches your symptoms and fitment.

Finding the correct part for a Volkswagen Passat 2.0 FSI 4MOTION can be challenging because the 4MOTION setup differs markedly from front-wheel-drive Passat models. Variations include the spline count on the shaft as well as the exact overall component length. To make selection straightforward and reliable, select your car's make, model and engine to filter out parts that are technically compatible with your specific build.

Once you see the results, it is still wise to double-check technical specifications if your car has had modifications or if there are chassis number splits. Our customer service team are driveline experts and can help you verify OEM part numbers or measure your old components to ensure you order the right part first time. With our fitment guarantee, you can rest assured that the parts you order will fit your car, keeping garage downtime to an absolute minimum.

Why shop at CVJoint24

CVJoint24 is more than just a car parts retailer; we are Swedish driveline and power transmission specialists. Our priority is offering depth in our range that general motor factors often lack. For a specific model such as the Volkswagen Passat 2.0 FSI 4MOTION, this means having the technical insight into the fine details that ensure long-lasting reliability. We understand how important it is to get your vehicle back on the road, which is why we provide fast delivery across Europe and customer support backed by genuine technical expertise.

When you buy from us, you always receive the right part at a competitive price without compromising on quality. We combine specialist know-how with the convenience of modern e-commerce. With our fitment guarantee and accurate model search, choosing technically advanced driveline parts is simple and reliable. Choose CVJoint24 for your next repair and experience the advantage of buying from true drivetrain specialists.

Frequently asked questions about drivetrain parts for Volkswagen Passat 2.0 FSI 4MOTION

Do drive shafts from a front-wheel-drive Passat fit my 4MOTION?

No, the drive shafts on a 2.0 FSI 4MOTION usually feature different lengths and spline counts to suit the unique differentials and wheel hubs of the all-wheel-drive system.

What are the most common signs of a failing propeller shaft?

The most common symptoms are vibrations that increase with vehicle speed and can be felt through the car body, as well as abnormal noises from the centre bearing or universal joints.

How many inner CV joints are fitted to my Passat 4MOTION?

Your car has a total of four inner CV joints: two on the front axle and two on the rear axle, as it is a four-wheel-drive model.

Are a CV boot and grease included when I purchase a CV joint from you?

Yes, our CV joint kits come complete with a CV boot, grease, clips and mounting hardware to ensure a straightforward replacement.

How do I make sure I select the right parts for my car?

Simply select your car's exact make, model and engine variant on our website. It is the most reliable way to filter out the 15 parts tailored specifically to your Passat 2.0 FSI 4MOTION.

What does your fitment guarantee mean?

It means we guarantee the part will fit your car perfectly when selected according to your correct vehicle specifications, giving you complete peace of mind with your purchase.