Volkswagen Passat 2.0 TDI 4MOTION

Spare parts and drivetrain components for the Volkswagen Passat 2.0 TDI 4MOTION. Select your make, model and engine to verify fitment before ordering.

Products for Volkswagen Passat 2.0 TDI 4MOTION

53 products
1 - 24 of 53
Item no.:0551624
  • Position: Outer
  • Seal diameter: 59 mm
  • Inner splines: 27
  • Outer splines: 36
  • Joint diameter: 97,95 mm
Item no.:650288
  • Position: Rear, Outer
  • Seal diameter: 59 mm
  • Inner splines: 33
  • Outer diameter: 82 mm
  • Splines wheel side: 36
Item no.:0494484
  • Position: Inner
  • Seal diameter: 100 mm
  • Inner splines: 33
  • Joint diameter: 100 mm
Item no.:2102697
  • Position: Front right
  • Flange diameter: 119 mm
  • Total length: 586 mm
  • Splines wheel side: 36
Item no.:0465336
  • Position: Inner
  • Inner splines: 34
  • Outer splines: 40
Item no.:1144847
  • Position: Front left
  • Flange diameter: 119 mm
  • Total length: 481 mm
  • Splines wheel side: 36
Item no.:2118371
  • Position: Front right
  • Flange diameter: 119 mm
  • Total length: 772 mm
  • Splines wheel side: 36
Item no.:1184001
  • Position: Front left
  • Total length: 562 mm
  • Splines gearbox side: 37
  • Splines wheel side: 36
Item no.:0447306
  • Position: Inner
  • Seal diameter: 119 mm
  • Inner splines: 34
Item no.:4178831
  • Position: Rear left
  • Flange diameter: 94 mm
  • Total length: 611 mm
  • Splines wheel side: 36
Item no.:5118996
  • Position: Rear right
  • Flange diameter: 94 mm
  • Total length: 650 mm
  • Splines wheel side: 36
Item no.:2117420
  • Position: Front right
  • Total length: 590 mm
  • Splines gearbox side: 40
  • Splines wheel side: 36
Item no.:4120567
  • Position: Rear left
  • Flange diameter: 100 mm
  • Total length: 600 mm
  • Splines wheel side: 36
Item no.:5144663
  • Position: Rear right
  • Flange diameter: 100 mm
  • Total length: 640 mm
  • Splines wheel side: 36
Item no.:0231187
  • Diameter: 30 mm
  • Hole spacing c/c: 410 mm
  • Bearing thickness: 37 mm
Item no.:0287159
  • Number of centre bearings: 1
  • Number of joints: 1
  • Total length: 2,160 mm
Item no.:5196853
  • Position: Rear right
  • Flange diameter: 100 mm
  • Total length: 631 mm
  • Splines wheel side: 36
Item no.:646127
  • Position: Rear, Inner
  • Diameter: 86 mm
  • Splines gearbox side: 33
  • Width: 34 mm
Item no.:629350
  • Position: Rear
  • Diameter: 30 mm
  • Hole spacing c/c: 410 mm
  • Bearing thickness: 37 mm
Item no.:2194623
  • Position: Front right
  • Flange diameter: 119 mm
  • Total length: 555 mm
  • Splines wheel side: 36
Item no.:340439
  • Position: Inner
  • Inner splines: 28
Item no.:1183206
  • Position: Front left
  • Flange diameter: 108 mm
  • Total length: 488 mm
  • Splines wheel side: 36
Showing 1–24 of 53 products

Drivetrain for Volkswagen Passat 2.0 TDI 4MOTION

The Volkswagen Passat 2.0 TDI 4MOTION represents one of the most popular combinations of power and capability on European roads. For this all-wheel-drive machine to perform at its peak, it requires a world-class drivetrain. The 4MOTION system is engineered to manage the high torque generated by the 2.0 TDI engine, placing rigorous demands on material quality and precision across every single component. A weak link in the power transmission can not only cause irritating noises, but also compromise handling and driving safety.

At CVJoint24, we focus on providing parts that match or exceed original specifications, ensuring your Passat continues to deliver the stability and traction you expect, whether tackling snowy winter roads or embarking on long motorway journeys. We understand how essential it is that every component, from the smallest CV boot to the complete propeller shaft, works in seamless harmony to minimise energy losses and wear.

How the drivetrain works on the Volkswagen Passat 2.0 TDI 4MOTION

The technical layout of the drivetrain on a Volkswagen Passat 2.0 TDI 4MOTION is an impressive feat of engineering that enables intelligent four-wheel drive. At the heart of the system is the transverse engine paired with a gearbox that routes torque outward via an angle drive (power transfer unit). At the front, two drive shafts manage both propulsion and steering forces, leaving them particularly susceptible to wear due to the wide angles experienced at full steering lock.

Power is channelled to the rear axle through a multi-piece propeller shaft supported by centre bearings to minimise body vibrations and resonance. Mounted at the rear axle is a Haldex coupling that adjusts torque transfer to the rear drive shafts in fractions of a second. This mechanical complexity means there are more potential points of wear than on a front-wheel-drive car, making it vital to choose replacement components with precise fitment and superior durability to maintain drivetrain balance and longevity.

Common faults and symptoms

Identifying drivetrain issues early can save significant time and expense. On a Volkswagen Passat 2.0 TDI 4MOTION, worn outer CV joints typically reveal themselves through a rhythmic clicking sound when turning sharply at low speeds. If vibrations travel through the car floor during acceleration instead, the cause is often worn inner CV joints closer to the gearbox or rear differential, as these experience more linear wear.

Because this model features a prop shaft, you should also listen for whining or rumbling noises coming from beneath the centre of the vehicle, which can indicate a failing centre bearing or an unbalanced shaft. Always inspect the CV boots regularly; a tiny split in the rubber allows grease to escape and road grit to enter, quickly destroying the precision-ground bearing surfaces inside the constant velocity joint. An illuminated ABS warning light can also point to a cracked or corroded ABS ring on the driveshaft, a frequent issue in regions using road salt during winter.

Common replacement parts for Volkswagen Passat 2.0 TDI 4MOTION

When the time comes to replace worn components on your Volkswagen Passat 2.0 TDI 4MOTION, knowing your options is essential. Our range is tailored to this specific model and includes everything required for a comprehensive overhaul of your power transmission:

  • Drive shafts for Volkswagen Passat 2.0 TDI 4MOTION – We offer over 20 distinct variants covering both front and rear axles across various model years.
  • Outer CV joints for Volkswagen Passat 2.0 TDI 4MOTION – Premium-grade joints supplied complete with CV joint boot, grease, and all necessary mounting hardware.
  • Inner CV joints for Volkswagen Passat 2.0 TDI 4MOTION – Precision-engineered components designed to eliminate vibrations and restore factory ride smoothness.
  • Propeller shafts for Volkswagen Passat 2.0 TDI 4MOTION – Heavy-duty shafts built to endure the demanding torque and balance requirements of the 4MOTION system.

Replacing worn components with parts matched to exact factory specifications prevents secondary damage to costly units such as the gearbox and rear differential. Selecting the correct category above allows you to find parts suited specifically to your car's drivetrain configuration.

Find the right part for your Volkswagen Passat 2.0 TDI 4MOTION

Navigate directly to the relevant component section for your Volkswagen Passat 2.0 TDI 4MOTION:

When troubleshooting an all-wheel-drive system with several possible fault locations, starting in the right category makes all the difference. Comparing the specific component categories for the Volkswagen Passat 2.0 TDI 4MOTION makes it straightforward to distinguish between faults in a drive shaft, CV joint, or propeller shaft, taking you directly to the correct parts catalogue.

Finding the correct replacement parts demands precision, particularly for a sophisticated car like the Volkswagen Passat 2.0 TDI 4MOTION. Begin by selecting your car's make, model, and engine variant in our catalogue. This filters the selection down to parts engineered for your specific vehicle configuration. Because car manufacturers occasionally source from multiple tier-one suppliers within the same production run, we always recommend verifying the technical dimensions on the product page.

This includes counting the splines (teeth) on the shaft ends or checking the overall compressed length of your original part prior to ordering. Cross-referencing these measurements with the specifications in our shop guarantees you receive the right part on the first attempt. Our goal is to take the guesswork out of ordering car parts, ensuring a seamless repair whether you are working in your own garage or booking into a workshop.

Why buy from CVJoint24?

CVJoint24 is the international shop of a Swedish driveline specialist, operating from our central warehouse in Helsingborg, Sweden. When purchasing parts for your Volkswagen Passat 2.0 TDI 4MOTION from us, you benefit from specialist engineering expertise that general retailers cannot match. We know the exact requirements of the 4MOTION drivetrain and supply high-precision, premium-quality components that fit properly the first time.

With swift dispatch and tracked delivery across the European Union, we keep your workshop downtime to a minimum. We are committed to supplying reliable spare parts at fair prices, backed by dedicated technical support that understands vehicle drivetrains inside out. Trust CVJoint24 to keep your Volkswagen running at its best with components engineered to withstand harsh driving conditions.

Frequently asked questions about drivetrain parts for Volkswagen Passat 2.0 TDI 4MOTION

How do I know if my Volkswagen Passat 2.0 TDI 4MOTION needs a new drive shaft?

Common signs include vibrations under acceleration or clicking noises when cornering. If you notice a torn CV boot and grease leaking out, there is a strong risk that the shaft or CV joint will need replacing shortly.

Do all Passat drive shafts fit my 4MOTION model?

No, 4MOTION models use specific drive shafts both at the front and rear that differ from the front-wheel-drive versions. Always select your vehicle's exact make, model and engine variant to find the correct part.

What causes propeller shaft vibrations on a Passat 2.0 TDI?

Vibrations are often caused by a worn centre bearing, failing universal joints or a prop shaft that has lost its balance weight. It is essential to resolve this quickly to prevent damage to the gearbox.

Can I replace just the CV joint instead of the complete drive shaft?

Yes, on the Volkswagen Passat 2.0 TDI 4MOTION you can often replace just the outer or inner CV joint, which is a cost-effective alternative if the shaft itself is undamaged.

Why is it important to check the tooth count on the ABS ring?

Different model years and equipment specifications can have different tooth counts on the ABS ring. If the tooth count does not match, the ABS warning light will trigger and the system will not function correctly.

Do you offer a fitment guarantee on parts for the Passat 4MOTION?

Yes, we provide a fitment guarantee. When you select your exact make, model and engine specification when ordering, we ensure you receive parts that are technically compatible with your specific car.