Volkswagen Passat 2.2

Welcome to CVJoint24, the international shop of a Swedish driveline specialist for your Volkswagen Passat 2.2. Maintaining your drivetrain is vital for the longevity and driving safety...

Products for Volkswagen Passat 2.2

11 products
1 - 11 of 11
Item no.:0671968
  • Total length: 122 mm
Item no.:0410315
  • Position: Inner
  • Inner splines: 33
  • Seal diameter: 100 mm
  • Total length: 34 mm
  • Joint diameter: 100 mm
Item no.:0484637
  • Position: Inner
  • Inner splines: 28
  • Seal diameter: 108 mm
  • Total length: 32 mm
  • Joint diameter: 108 mm
Item no.:350714
  • Position: Front, Outer
  • Inner splines: 30
  • Seal diameter: 51 mm
  • Outer splines: 22
  • Thread size: M16X1,5
Item no.:3544210
  • Position: Front, Outer
  • Inner splines: 30
  • Seal diameter: 51 mm
  • Outer splines: 22
  • Joint diameter: 82 mm
Item no.:349962
  • Position: Front, Inner
  • Inner splines: 33
  • Seal diameter: 94 mm
  • Total length: 32 mm
  • Joint diameter: 94 mm
Item no.:0650586
  • Total length: 111 mm
Item no.:0900918
  • Inner diameter: 24 mm
  • Outer diameter: 40 mm
Item no.:0637760
  • Total length: 111 mm
Item no.:0682862
  • Total length: 111 mm

Drivetrain for Volkswagen Passat 2.2

The drivetrain in a Volkswagen Passat 2.2 is an essential part of the car's mechanical health and overall performance. As one of the most reliable models of its era, the Passat demands replacement parts that meet the same exacting standards as the original components. The power transmission is a complex system that must cope with engine torque as well as the mechanical stresses caused by varied driving surfaces. Investing in the correct spare parts is not merely a matter of fixing a fault, but of preserving the car's driving characteristics and safety. At CVJoint24, we specialise in these precise components and understand the need for accurate engineering. By choosing us for drivetrain parts for your Volkswagen Passat, you ensure your vehicle continues to deliver the reassuring, stable ride you expect. Our range has been carefully selected to match the specific technical requirements of the 2.2 model, making us the natural choice for drivers who refuse to compromise on quality.

How the drivetrain is engineered on the Volkswagen Passat 2.2

The drivetrain layout on the Volkswagen Passat 2.2 reflects Volkswagen's proven engineering philosophy, pairing efficiency with long-term durability. The system relies primarily on drive shafts that transfer rotational power from the gearbox to the front wheels. Each drive shaft is fitted with two joints: an inner and an outer joint. The inner joint mounts to the gearbox side, and its primary role is to allow axial plunge as the suspension moves up and down. The outer joint, positioned at the wheel hub, is a constant velocity joint (CV joint) that accommodates steering angles whilst delivering smooth power. These joints are packed with specialised grease and protected by CV boots made from durable rubber or thermoplastic. On any Volkswagen, it is critical that these parts operate smoothly without excess friction or play. A well-maintained drivetrain reduces wear on adjacent components like tyres and wheel bearings, whilst also optimising fuel consumption by keeping mechanical driveline losses to a minimum.

Common faults and symptoms

Catching drivetrain issues early can save significant time and expense for any Volkswagen Passat 2.2 owner. The most frequent signs of wear can typically be heard or felt whilst out on the road. A sharp, rhythmic clicking noise that accelerates when cornering is the classic symptom of a worn outer CV joint. If you experience chassis vibrations under acceleration that subside as soon as you ease off the throttle, a worn inner joint is frequently the culprit. It is equally important to inspect the CV boots regularly; cracking, splits or grease sprayed over the wheel arch indicate the seal has failed. Once a boot tears, road dirt and moisture penetrate the joint cavity, rapidly scoring the precision-hardened contact surfaces. Ignoring these warning signs can result in complete mechanical failure, such as a broken drive shaft, leaving the car stranded and risking secondary damage to the gearbox or suspension—a far more costly repair than a preventative replacement.

Common parts to replace on the Volkswagen Passat 2.2

When carrying out maintenance on your Volkswagen Passat 2.2, certain components are replaced more regularly due to standard wear and tear. We have tailored our range to address the key maintenance requirements of this specific variant. On the Passat 2.2, CV joints and their protective boots require the most frequent attention. By replacing worn components with our quality parts, you restore your car's mechanical reliability and put an end to irritating noises or vibrations. We always recommend fitting a new CV boot whenever servicing a joint, or renewing both joints along an axle if the car has covered considerable mileage, ensuring a long-lasting fix. Our stock includes parts tested to handle the specific torque demands that the 2.2 engine places on the driveline. Selecting the correct part from the start is vital for a lasting repair that keeps your Passat driving smoothly for years to come.

Finding the right part for your Volkswagen Passat 2.2

Navigate directly to the relevant subcategory for the Volkswagen Passat 2.2:

When dealing with driveline issues, starting in the right section saves valuable time. By comparing the specific subcategories for the Volkswagen Passat 2.2, you can easily distinguish between problems with the drive shaft, CV joints or propeller shaft, and head straight to the parts that match your symptoms and vehicle specification.

Our database for All car makes is continuously updated to ensure accurate matching. Once you have located the options for your vehicle, we recommend checking the technical specifications in the product descriptions—such as spline count and fitting diameters—for complete peace of mind. Should you need any assistance choosing the right part for your Volkswagen Passat 2.2, our customer support team is always on hand with technical advice, helping you order with total confidence and avoid unnecessary returns.

Why shop with CVJoint24

CVJoint24 is the international shop of a Swedish driveline specialist with its warehouse in Helsingborg, Sweden, dedicated entirely to drivetrain engineering. When you order parts for your Volkswagen Passat 2.2 from us, you benefit from deep technical knowledge that general car parts retailers rarely provide. We offer a reliable fitment guarantee, giving you complete reassurance that the components you purchase will fit your car accurately. Our focus on getting it right the first time saves you both time and workshop expenses. We also know how important it is to get your vehicle back on the road quickly, which is why we dispatch stocked items promptly across the EU. By combining top-grade parts with expert technical support and dependable logistics, we are the trusted choice for reliable Volkswagen drivetrain parts. We are dedicated to keeping your vehicle's driveline running in peak condition.

Frequently asked questions about drivetrain parts for Volkswagen Passat 2.2

How do I know if a CV joint fits my Volkswagen Passat 2.2?

The most reliable way is to select your vehicle's make, model and engine in our search filter. We will then display the 5 products specifically matched to your Volkswagen Passat 2.2.

What are the most common signs of a failing outer CV joint?

A clicking or knocking noise when cornering, especially on full lock at low speeds, is the most typical symptom of a worn outer CV joint.

Can I replace just the CV boot if the joint is still intact?

Yes, if you catch a split or torn CV boot early before dirt and moisture penetrate the joint, you can save money by simply replacing the boot and repacking it with fresh grease.

Why is my Volkswagen Passat 2.2 vibrating during acceleration?

Vibrations under acceleration are often a sign of wear in the inner CV joint, which is located closest to the gearbox.

How many CV joints are fitted to a Volkswagen Passat 2.2?

The car typically has two front drive shafts, each with an inner and an outer CV joint, making a total of four constant velocity joints on the front axle.

What is included in a CV joint kit from CVJoint24?

Our kits are complete and usually include the CV joint, CV boot, specialised grease, clamps, and any necessary bolts or nuts required for installation.