Volkswagen Passat 3.6 R36.4motion

Spare parts and drivetrain components for Volkswagen Passat 3.6 R36.4motion. Check fitment by selecting your make, model and engine before ordering.

Products for Volkswagen Passat 3.6 R36.4motion

30 products
1 - 24 of 30
Item no.:0413815
  • Position: Inner
  • Inner splines: 33
  • Seal diameter: 100 mm
  • Total length: 34 mm
  • Joint diameter: 100 mm
Item no.:0417311
  • Position: Front right, Inner
  • Inner splines: 34
  • Seal diameter: 46 mm
  • Total length: 128,5 mm
  • Joint diameter: 85 mm
Item no.:0535554
  • Position: Outer
  • Inner splines: 30
  • Splines wheel side: 36
  • Seal diameter: 60 mm
  • Outer diameter: 90 mm
Item no.:4144680
  • Position: Rear left
  • Splines wheel side: 36
  • Total length: 594 mm
  • Diameter 2: 100 mm
  • Flange diameter: 100 mm
Item no.:5152360
  • Position: Rear right
  • Splines wheel side: 36
  • Total length: 631 mm
  • Diameter 2: 100 mm
  • Flange diameter: 100 mm
Item no.:0514661
  • Position: Outer
  • Inner splines: 27
  • Seal diameter: 59 mm
  • Outer splines: 36
  • Thread size: M16X1,5
Item no.:145146
  • Position: Inner
  • Inner splines: 34
  • Seal diameter: 31 mm
  • Total length: 156 mm
  • Joint diameter: 85 mm
Item no.:645532
  • Position: Rear, Inner
  • Splines gearbox side: 33
  • Outer splines: 33
  • Diameter: 86 mm
  • Width: 34 mm
Item no.:656659
  • Position: Rear, Outer
  • Inner splines: 33
  • Seal diameter: 59 mm
  • Outer splines: 36
  • Joint diameter: 82 mm
Item no.:656049
  • Position: Rear, Outer
  • Inner splines: 33
  • Seal diameter: 59,5 mm
  • Total length: 80 mm
  • Splines gearbox side: 36
Item no.:215103
  • Position: Front
  • Splines wheel side: 36
  • Total length: 600 mm
  • Joint diameter: 98 mm
  • Joint diameter, gearbox side: 108 mm
Item no.:318603
  • Position: Front
  • Splines wheel side: 36
  • Total length: 480 mm
  • Joint diameter: 110 mm
  • ABS teeth: 28
Item no.:348132
  • Position: Front, Inner
  • Inner splines: 28
  • Seal diameter: 108 mm
  • Total length: 32 mm
  • Joint diameter: 107 mm
Item no.:0430138
  • Position: Inner
  • Inner splines: 33
  • Splines gearbox side: 36
  • Seal diameter: 59,5 mm
  • Total length: 79 mm
Item no.:0938324
  • Inner diameter: 67 mm
  • Outer diameter: 83 mm
Item no.:0615336
  • Position: Rear
  • Total length: 59 mm
Item no.:0630782
  • Total length: 102 mm
Item no.:0920521
  • Inner diameter: 65 mm
  • Outer diameter: 88 mm
Item no.:0636818
  • Total length: 125 mm
Item no.:0913154
  • Inner diameter: 42 mm
  • Outer diameter: 83 mm
Item no.:0658873
  • Total length: 111 mm
Item no.:0930246
  • Inner diameter: 38 mm
  • Outer diameter: 63 mm
Showing 1–24 of 30 products

Drivetrain for Volkswagen Passat 3.6 R36.4motion

The Volkswagen Passat 3.6 R36.4motion is a unique model in the Passat lineup, renowned for its potent VR6 engine and sophisticated 4motion system. Handling the substantial output and torque generated by the 3.6-litre engine demands drivetrain components of the highest standard. The drivetrain is central to the car's performance, distributing power seamlessly to all four wheels to ensure the reassuring stability characteristic of the R36. At CVJoint24, you will find a dedicated range tailored specifically to this performance model. We focus on supplying parts that not only fit precisely, but are engineered to withstand the demanding mechanical loads of spirited driving. Proper drivetrain maintenance on an R36 is crucial for preserving its handling and safety, especially when deploying its full capability on European roads.

How the drivetrain is engineered on the Volkswagen Passat 3.6 R36.4motion

The drivetrain architecture on a Volkswagen Passat 3.6 R36.4motion is notably complex compared to standard models. It features a transverse engine transmitting power through a DSG gearbox to the front axle and, via an electronically regulated Haldex coupling, onwards to the rear axle when required. Crucial to this layout is a robust propeller shaft running beneath the chassis to transfer drive rearwards. At the front, the drive shafts must handle steering angles and torque delivery simultaneously, placing high demands on the outer CV joints. Drive to the rear axle is supplied via the prop shaft, where the inner joints play an essential role in accommodating angular variations and dampening vibrations during travel. The entire driveline integrates closely with the vehicle's electronic stability and traction control systems to deliver optimum grip across all driving conditions, from dry summer tarmac to winter ice.

Common faults and symptoms

Despite this robust engineering, drivetrain components on an R36 will naturally wear over time, given the performance nature of the vehicle. A rhythmic clicking sound on full steering lock at lower speeds is a classic sign that an outer CV joint is failing. Vibrations through the vehicle body under hard acceleration typically point to a worn inner CV joint, where play inside the housing causes balance issues. Vibrations felt through the centre of the car often indicate wear in the propeller shaft or its centre bearing. Inspecting the CV boots regularly is equally vital; torn boots quickly lead to grease loss and road grit ingress, causing rapid wear and potential joint failure. Addressing these symptoms promptly prevents far more costly secondary damage to the gearbox and differentials.

Common parts to replace on the Volkswagen Passat 3.6 R36.4motion

Owners of a Passat R36 will find that certain driveline parts naturally need replacement over time to maintain refined operation and performance. Our range for this model includes complete drive shafts for front and rear, high-load outer CV joints built to handle the VR6 torque, and inner constant velocity joints designed to eliminate driveline vibration. We provide components tailored to this specific specification, covering the critical wear points. Replacing a complete driveshaft can often prove more cost-effective than replacing individual joints, especially if the original shaft shows signs of corrosion or metal fatigue. Sourcing the right parts ensures the 4motion system continues to perform just as the engineers in Wolfsburg originally intended.

Find the right parts for your Volkswagen Passat 3.6 R36.4motion

Select the relevant category for your Volkswagen Passat 3.6 R36.4motion:

When troubleshooting driveline issues, selecting the right category directly makes diagnosis and sourcing far simpler. Comparing the specific subcategories for the Volkswagen Passat 3.6 R36.4motion helps you differentiate between drive shaft, CV joint, or prop shaft faults and quickly navigate to the matching replacement.

Navigating drivetrain components can be challenging, particularly for high-performance variants like the R36 with unique mechanical requirements. To make finding parts straightforward, we have structured our range so you can locate exactly what you need for your Volkswagen Passat. The most reliable way to ensure correct fitment is to select your car's make, model, and engine variant, filtering the catalogue down to verified components for your vehicle. Key categories for this model include:

  • Drive shafts for Volkswagen Passat 3.6 R36.4motion
  • Outer CV joints for Volkswagen Passat 3.6 R36.4motion
  • Inner CV joints for Volkswagen Passat 3.6 R36.4motion
  • Propeller shafts for Volkswagen Passat 3.6 R36.4motion
Following these links takes you directly to the verified parts for your Volkswagen Passat 3.6 R36.4motion. We recommend double-checking technical specifications if your car has undergone modifications or if multiple options exist for your model year.

Why choose CVJoint24

As Swedish driveline specialists, we bring technical depth and expertise to every component we supply across the EU. We understand the specific engineering behind the Volkswagen Passat 3.6 R36.4motion and provide parts that meet rigorous standards to manage the car's performance reliably. When you order from CVJoint24, you receive high-grade spare parts backed by our fitment guarantee. Our focus is ensuring you get the correct part first time, saving both time and workshop costs. With extensive stock dispatched quickly from our central warehouse, we are the trusted choice for drivers who demand quality without compromise. Trust the specialists for your car's critical driveline components – choose CVJoint24 for your next order.

Frequently asked questions about drivetrain parts for the Volkswagen Passat 3.6 R36 4motion

How do I know if my Volkswagen Passat 3.6 R36 4motion needs a new drive shaft?

Common signs include vibrations under acceleration, clicking noises when cornering, or visible damage to the shaft. Select your car's make, model, and engine to find the correct replacement shaft.

Do all Passat CV joints fit an R36?

No, the R36 model often features heavy-duty components and specific splines to cope with the higher power output from the 3.6-litre engine.

What is the difference between an inner and outer CV joint on my R36?

The outer joint sits at the wheel hub and accommodates steering angles, whilst the inner joint sits at the gearbox and accommodates axial movement in the drivetrain.

How often should you inspect the CV boots on a 4motion car?

We recommend checking them at every service or wheel change. A split CV boot quickly allows dirt in, which destroys the constant velocity joint.

Can I replace only the prop shaft centre bearing on a Passat R36?

That depends on the design of the propeller shaft, but it is often safer and more durable to inspect and balance the entire shaft if vibrations occur.

Does the fitment guarantee apply when selecting my vehicle details?

Yes, we guarantee that the part fits the specific car matched when selecting your correct make, model, and engine variant in our store.