Volkswagen Passat 4.0 W8.4motion

Spare parts and drivetrain components for Volkswagen Passat 4.0 W8.4motion. Select your vehicle make, model and engine to confirm exact fitment before ordering.

Products for Volkswagen Passat 4.0 W8.4motion

17 products
1 - 17 of 17
Item no.:1137467
  • Position: Front left
  • Splines wheel side: 38
  • Total length: 625 mm
  • Joint diameter: 98 mm
  • ABS teeth: 45
Item no.:0439058
  • Position: Inner
  • Inner splines: 34
  • Seal diameter: 130 mm
  • Total length: 59,5 mm
  • Joint diameter: 90 mm
Item no.:0585926
  • Position: Outer
  • Inner splines: 27
  • Seal diameter: 59 mm
  • Outer splines: 38
  • ABS teeth: 45
Item no.:1193560
  • Position: Front left
  • Splines wheel side: 38
  • Total length: 611 mm
  • Joint diameter: 98 mm
  • ABS teeth: 45
Item no.:2134896
  • Position: Front right
  • Splines wheel side: 38
  • Total length: 500 mm
  • Joint diameter: 98 mm
  • ABS teeth: 45
Item no.:0364626
  • Position: Front
  • ABS teeth: 45
  • Inner diameter: 77 mm
  • Outer diameter: 81 mm
  • Width: 11 mm
Item no.:331002
  • ABS teeth: 45
  • Inner diameter: 77 mm
  • Outer diameter: 81 mm
  • Width: 11 mm
Item no.:0644507
  • Total length: 92 mm
Item no.:0650323
  • Total length: 88 mm
Item no.:1152668
  • Position: Front left
  • Splines wheel side: 38
  • Total length: 524 mm
  • Joint diameter: 114 mm
  • ABS teeth: 45
Item no.:649145
  • Position: Inner
  • Inner splines: 28
  • Seal diameter: 108 mm
  • Total length: 32 mm
  • Joint diameter: 108 mm
Item no.:7300654
  • Position: Inner
  • Inner splines: 33
  • Splines gearbox side: 33
  • Total length: 32 mm
Item no.:0916602
  • Inner diameter: 60 mm
  • Outer diameter: 80 mm
Item no.:0604416
  • Total length: 122 mm
Item no.:0996426
  • Inner diameter: 24 mm
  • Outer diameter: 40 mm
Item no.:0931123
  • Inner diameter: 73 mm
  • Outer diameter: 90 mm
Item no.:1124733
  • Splines wheel side: 38
  • Total length: 602 mm
  • Joint diameter, gearbox side: 130 mm

Drivetrain for Volkswagen Passat 4.0 W8.4motion

The Volkswagen Passat 4.0 W8.4motion is an engineering milestone in Volkswagen's history. With its unique eight-cylinder engine in a W configuration and permanent 4motion all-wheel drive, this car demands parts of the highest quality. The drivetrain is vital to how the car delivers power to the tarmac, and on a model boasting such high torque and power output, every link in the transmission chain is put under intense stress. At CVJoint24, we understand the specific requirements of this vehicle and supply parts that meet or exceed original equipment specifications.

Maintaining the drivetrain on a Passat W8 is not merely about changing parts when they fail; it is about proactively ensuring power transfer remains smooth and efficient. Because the W8 was manufactured in limited numbers, sourcing the right replacement parts from general car part retailers can often be difficult. We focus on stocking the most critical components, from complete drive shafts to specific inner and outer CV joints, ensuring you can keep your car in peak mechanical condition without unnecessary delays.

How the drivetrain is engineered on the Volkswagen Passat 4.0 W8.4motion

The drivetrain layout in a Volkswagen Passat 4.0 W8.4motion differs considerably from standard front-wheel-drive models. The system relies on a longitudinally mounted engine paired with a Torsen differential to provide permanent mechanical four-wheel drive. Power is distributed continuously between the front and rear axles depending on available traction. Handling this requires heavy-duty drive shafts at both the front and rear, alongside high-performance constant velocity joints designed to withstand severe angles and rotational stresses during hard acceleration and cornering.

Each wheel station features dedicated components, including an outer CV joint at the wheel hub and an inner CV joint mounted to the differential or gearbox. On the W8, these items are uprated to cope with the extra weight and substantial output of the engine. Furthermore, the ABS is integrated directly into the drivetrain via ABS rings fitted onto the CV joints. These rings supply crucial wheel-speed data to vital electronic safety systems, such as traction control and electronic stability programme (ESP)—essential on a high-performance all-wheel-drive saloon or estate.

Common faults and symptoms

Despite robust engineering, the drivetrain on a Passat W8 remains subject to wear over time. A common indicator of a failing outer CV joint on a Volkswagen Passat 4.0 W8.4motion is a distinct clicking or knocking noise when turning tightly at low speeds. This typically occurs after a CV boot splits, allowing road dirt to enter and grease to escape, which rapidly wears down the internal bearings and races. If you experience vibrations through the floorpan under acceleration, especially at motorway speeds, a worn inner CV joint is frequently the underlying cause.

Another frequent issue stems from the ABS reluctor rings. If the ABS warning light illuminates or the anti-lock system intervenes unexpectedly during ordinary braking, a cracked or corroded ABS ring is usually responsible. Exposed to harsh European road grit and weather, even a hairline fracture in the ring can distort sensor readings. It is also wise to inspect differentials and driveshaft seals for oil leaks, as a lack of lubrication can quickly cause catastrophic damage to the complex 4motion setup.

Common parts to replace on the Volkswagen Passat 4.0 W8.4motion

To preserve both the driving dynamics and safety of your Passat W8, certain driveline parts will inevitably require replacement. In our catalogue for this performance model, you will find three distinct drive shaft variants covering the various axle positions. Replacing an entire drive shaft assembly is often more practical and cost-effective than overhauling a single joint, providing fresh CV joint boots and renewed joints at both ends. We also stock two specific inner CV joints matched to your car's exact transmission layout.

Alongside the mechanical joints, the ABS ring is a critical component to keep in order. We stock two different ABS ring variants to ensure a precise match for your model year and wheel position. Here is an overview of the key categories for the Volkswagen Passat 4.0 W8.4motion:

  • Drive shafts for Volkswagen Passat 4.0 W8.4motion
  • Outer CV joints for Volkswagen Passat 4.0 W8.4motion
  • Inner CV joints for Volkswagen Passat 4.0 W8.4motion
  • ABS rings for Volkswagen Passat 4.0 W8.4motion

Finding the right part for your Volkswagen Passat 4.0 W8.4motion

Navigate directly to the required component section for your Volkswagen Passat 4.0 W8.4motion:

On a vehicle where multiple driveline issues can present similar symptoms, starting in the correct category saves valuable time. By comparing the exact sections for the Volkswagen Passat 4.0 W8.4motion, diagnosing whether a fault lies with a drive shaft, CV joint or propeller shaft becomes much simpler, leading you straight to the correct replacement part.

Selecting replacement car parts for a model as specialised as the Passat W8 requires exact precision. Because its drivetrain is heavily modified compared to everyday Passats, parts from a 1.8T or V6 will rarely fit. The most dependable method to identify the correct part on cvjoint24.com is to select your vehicle by make, model and engine variant. Filtering by these technical criteria ensures you see parts verified specifically for your Volkswagen Passat 4.0 W8.4motion, avoiding incorrect purchases and unnecessary workshop downtime.

Once you have located the relevant category—such as inner CV joints for the Volkswagen Passat 4.0 W8.4motion—we also recommend verifying key technical details such as spline counts and dimensions where listed. This is vital on rare performance derivatives where minor factory revisions occurred across production runs and gearbox types. If you need assistance, our knowledgeable customer support team is always on hand to help you navigate our specialist driveline range.

Why buy from CVJoint24?

CVJoint24 is an international shop powered by a Swedish driveline specialist, dispatching parts directly from our Helsingborg warehouse across the EU. For an owner of a Volkswagen Passat 4.0 W8.4motion, this means dealing with experts who genuinely understand the complexity of high-performance all-wheel-drive systems. We combine detailed technical knowledge with premium spare parts ready for swift dispatch, backed by an accurate fitment guarantee so you can order with absolute confidence.

We are dedicated to providing the finest driveline solutions on the market, whether you need a complete replacement driveshaft or an essential ABS ring for your Volkswagen Passat 4.0 W8.4motion. By ordering through us, you gain access to specialist expertise that helps you select the correct part the first time. With an emphasis on build quality, rapid European delivery and dedicated service, CVJoint24 is the trusted choice to keep your Passat W8 delivering its unique power for thousands of kilometres ahead.

Frequently asked questions about drivetrain parts for Volkswagen Passat 4.0 W8.4motion

Do drive shafts from a standard Passat V6 fit a W8.4motion?

No, the Volkswagen Passat 4.0 W8.4motion features a unique drivetrain tailored to the larger engine and the specific 4motion system. The components are often built to heavier-duty dimensions, so it is vital to select parts specifically listed for the W8 model.

What are the most common signs of a failing outer CV joint on my Passat W8?

The most common symptom is a rhythmic clicking noise when turning, especially under acceleration. If the noise disappears when driving straight ahead, this is a clear sign that the outer CV joint is worn and requires replacement.

Why does my car vibrate under acceleration?

Vibrations during acceleration, particularly when felt through the car's chassis rather than the steering wheel, often indicate a worn inner CV joint. On a W8.4motion, this can be especially noticeable due to the high engine torque.

How does a cracked ABS ring affect my Volkswagen Passat W8?

A damaged or cracked ABS ring sends false signals to the car's control unit. This can trigger the ABS warning light, cause traction control systems (ASR/ESP) to intervene unnecessarily, or prevent the four-wheel drive system from functioning correctly.

Can I replace just the CV boot if the CV joint still seems fine?

Yes, if you catch a split CV boot early before dirt and moisture have contaminated the joint, replacing just the boot and repacking it with fresh grease is often sufficient. However, if the joint has already started making noise, replacing the complete CV joint is the safest approach.

How do I know which inner CV joint to choose?

As there are two different variants for the W8 model, we recommend selecting your exact make, model and engine variant in our shop. Be sure to also check the dimensions and spline count against your original part to confirm the perfect fit.