Volkswagen Polo 1.1

Welcome to CVJoint24, the international shop of a Swedish driveline specialist providing quality drivetrain parts for the Volkswagen Polo 1.1. Choosing the right power transmission...

Products for Volkswagen Polo 1.1

9 products
1 - 9 of 9
Item no.:0485510
  • Position: Inner
  • Inner splines: 33
  • Seal diameter: 94 mm
  • Total length: 32 mm
  • Joint diameter: 94 mm
Item no.:1179327
  • Position: Front left
  • Splines wheel side: 20
  • Total length: 480 mm
  • Joint diameter: 77 mm
  • Joint diameter, gearbox side: 92 mm
Item no.:2165541
  • Position: Front right
  • Splines wheel side: 20
  • Total length: 732 mm
  • Joint diameter: 77 mm
  • Joint diameter, gearbox side: 92 mm
Item no.:1131643
  • Position: Front left
  • Splines wheel side: 22
  • Total length: 515 mm
  • Joint diameter: 81 mm
  • Joint diameter, gearbox side: 92 mm
Item no.:1194657
  • Position: Front left
  • Splines gearbox side: 92
  • Splines wheel side: 20
  • Total length: 480 mm
  • Joint diameter: 77 mm
Item no.:2137051
  • Position: Front right
  • Splines wheel side: 20
  • Total length: 730 mm
  • Flange diameter: 92 mm
  • Tripod shaft diameter: 39 mm
Item no.:3504083
  • Position: Outer
  • Inner splines: 30
  • Seal diameter: 45 mm
  • Outer splines: 20
  • Thread size: M20X1,5
Item no.:1132199
  • Position: Front left
  • Splines wheel side: 20
  • Total length: 480 mm
  • Joint diameter: 81 mm
  • Joint diameter, gearbox side: 92 mm
Item no.:2177033
  • Position: Front right
  • Splines wheel side: 20
  • Total length: 732 mm
  • Joint diameter: 81 mm
  • Joint diameter, gearbox side: 92 mm

Drivetrain for Volkswagen Polo 1.1

The Volkswagen Polo 1.1 is a classic small car where every component in the drivetrain plays a crucial role in transferring the engine's power to the road efficiently. As specialists in drivetrains, we understand the specific demands placed on this particular model. Despite its modest engine capacity, the Polo 1.1 requires high-quality components to retain its characteristic driving pleasure and reliability. We have gathered the most critical parts for your car's power delivery in one place to make maintenance straightforward. Choosing the right parts not only extends the vehicle's lifespan, but also ensures a safe driving experience for you and your passengers.

Our product range is comprehensive and specialised, allowing us to supply solutions that match the original factory specifications for your specific Volkswagen. We focus on providing parts that withstand everyday wear and tear, whether tackling city driving or longer journeys. Maintaining the drivetrain is an investment in your car's future value and functionality, and with the right expertise by your side, the process is both simpler and safer.

How the drivetrain is configured on the Volkswagen Polo 1.1

The drivetrain layout on a Volkswagen Polo 1.1 is engineered to be compact and efficient, which is characteristic of front-wheel-drive cars in this class. Power is produced by the engine and routed via the gearbox to the front wheels through two drive shafts. Each Volkswagen Polo 1.1 drive shaft is equipped with both inner and outer CV joints, allowing the wheels to move up and down with the suspension and steer while constantly transmitting power. The inner CV joint mounts directly to the gearbox and accommodates the axial movement generated as the suspension travels.

For the Polo 1.1, keeping these components in top condition is essential to prevent unnecessary friction and energy loss. The entire system relies on intact CV boots and optimal lubrication to avoid premature wear on mechanical surfaces. A properly functioning drivetrain reduces vibrations and running noise, significantly improving comfort inside a compact car. We make sure that all the parts we deliver meet the rigorous demands needed to sustain this balance between performance and durability.

Common faults and symptoms

Several clear signs indicate that your car's drivetrain is beginning to wear out. One of the most typical symptoms of a failing inner CV joint on a Volkswagen Polo 1.1 is vibration felt through the car body under acceleration. These vibrations frequently subside when you lift off the accelerator, which strongly points to an issue in power transmission rather than wheel balancing. If you notice a rhythmic clicking noise on full steering lock, a worn outer constant velocity joint is usually the cause—another familiar issue on front-wheel-drive vehicles.

Another warning sign is finding grease splattered on the inside of the wheel rim or under the car when parked, indicating a split CV boot. When a boot tears, dirt and road water penetrate the joint while lubricating grease is flung out, resulting in rapid joint failure if neglected. Ignoring these symptoms can lead to consequential damage to both the gearbox and suspension, making the final repair substantially more expensive.

Common parts to replace on the Volkswagen Polo 1.1

For Volkswagen Polo 1.1 owners, drive shafts and inner CV joints are the parts most frequently replaced during drivetrain repairs. In our catalogue you will find dedicated items designed specifically for the 1.1-litre engine's torque output and gearbox couplings. We currently stock multiple complete drive shaft options as well as various inner CV joints for this model. Fitting a complete driveshaft can often prove more cost-effective than replacing individual joints, as you immediately gain brand-new boots and fresh joints at both ends.

It is also sensible to inspect surrounding components such as wheel bearings and suspension bushes while working on the drivetrain of your Volkswagen Polo. Taking a proactive approach to replacement helps you prevent expensive secondary damage to the gearbox. Our car parts are selected to deliver service life matching or exceeding original equipment, giving you complete peace of mind for many kilometres to come. We always advise renewing parts in axle pairs if wear is evident on one side, as the opposite side has typically endured equivalent stress.

How to find the right part for your Volkswagen Polo 1.1

Select the correct subcategory for your Volkswagen Polo 1.1:

When troubleshooting a vehicle with several possible drivetrain faults, starting in the precise subcategory is essential. By comparing the exact component sections for the Volkswagen Polo 1.1, it becomes simple to distinguish between drive shaft, CV joint, or prop shaft issues and navigate straight to the items that best suit your symptoms and fitment.

Using these direct links ensures you reach the correct product page with guaranteed fitment straight away. Our database is updated continuously so you can always rely on our recommendations when searching by make, model and engine variant.

Why buy from CVJoint24?

When you choose CVJoint24, you rely on an international shop backed by Swedish driveline specialists, shipping high-quality parts across Europe from our warehouse in Helsingborg, Sweden. We understand how vital it is to obtain the exact part the first time, which is why we provide an accurate fitment guarantee across our entire range. Our aim is to help you select correctly from the outset, avoiding frustrating returns that cost valuable time and energy. With our prompt dispatch across the EU, we keep garage downtime to an absolute minimum.

We combine a specialised stockholding with knowledgeable technical support that can genuinely answer detailed questions about your vehicle's driveline. Being specialists means we do not merely supply car parts; we understand how they work and why they fail. We consistently provide the right replacement parts at competitive prices without cutting corners on quality. Partner with specialists who prioritise your car's reliability and have the expertise to guide you straight to the right component. Your Volkswagen Polo 1.1 is in safe hands with us.

Frequently asked questions about drivetrain parts for Volkswagen Polo 1.1

How do I know if the drive shaft on my Polo 1.1 needs replacing?

The most common signs are vibrations under acceleration, clicking noises when cornering, or visible damage to the CV boots leaking grease.

Do all drive shafts fit the Volkswagen Polo 1.1?

No, it is essential to choose parts specifically designed for the 1.1 engine. Select your car's make, model and engine to guarantee the correct fit.

What is the difference between an inner and an outer CV joint?

The inner joint sits next to the gearbox and typically causes vibrations when worn, whilst the outer joint is located at the wheel and creates clicking noises when turning.

Are the CV boot and grease included when I buy an inner CV joint?

Yes, our CV joint kits come complete with a CV boot, high-quality grease and all necessary fitting components.

Why does my car vibrate when accelerating?

On a Volkswagen Polo 1.1, this is often caused by wear in the inner CV joint, leading to an imbalance in the drivetrain.

How quickly will I receive my spare parts?

We offer fast delivery across Europe to get your car back on the road as quickly as possible after your order.