Volkswagen Polo 50.1 0

Spare parts and drivetrain components for the Volkswagen Polo 50.1 0. Verify fitment by selecting your make, model and engine before ordering.

Products for Volkswagen Polo 50.1 0

9 products
1 - 9 of 9
Item no.:0484453
  • Position: Inner
  • Inner splines: 33
  • Seal diameter: 78 mm
  • Total length: 32 mm
  • Joint diameter: 92 mm
Item no.:1164414
  • Position: Front left
  • Splines wheel side: 22
  • Total length: 515 mm
  • Joint diameter: 81 mm
  • Joint diameter, gearbox side: 92 mm
Item no.:0615121
  • Total length: 113 mm
Item no.:2164424
  • Position: Front right
  • Splines wheel side: 22
  • Total length: 736 mm
  • Joint diameter: 81 mm
  • Joint diameter, gearbox side: 92 mm
Item no.:7315275
  • Position: Front
  • Splines wheel side: 22
  • Total length: 750 mm
  • Joint diameter: 81 mm
  • Joint diameter, gearbox side: 94 mm
Item no.:0518714
  • Position: Front, Outer
  • Inner splines: 30
  • Seal diameter: 51 mm
  • Outer splines: 22
  • Thread size: M16X1,5
Item no.:1165081
  • Position: Front left
  • Splines wheel side: 22
  • Total length: 525 mm
  • Joint diameter: 81 mm
  • Joint diameter, gearbox side: 94 mm
Item no.:0480753
  • Position: Inner
  • Inner splines: 33
  • Seal diameter: 94 mm
  • Total length: 32 mm
  • Joint diameter: 94 mm
Item no.:0627382
  • Position: Front

Drivetrain for Volkswagen Polo 50.1 0

The Volkswagen Polo 50.1 0 is a compact and efficient car where the drivetrain plays a pivotal role in the driving experience. Power transmission in this specific variant is engineered to handle city commuting as well as longer journeys with precision. At CVJoint24, you will find a dedicated range for this exact model, covering everything from complete drive shafts to specific components such as ABS rings. With parts tailored to this configuration, we offer a high degree of specialisation. Selecting the right parts for your Polo is not merely a question of function, but also of safety and long-term economy. We understand the technical nuances of the Volkswagen Polo 50.1 0 and provide components that meet or exceed original equipment specifications to keep your car reliable on European roads. By focusing on quality, we ensure every part withstands the demands of challenging climates and tough driving conditions.

How the drivetrain is structured on the Volkswagen Polo 50.1 0

The drivetrain on a Volkswagen Polo 50.1 0 is built around a front-wheel-drive configuration where engine power is delivered through the gearbox to the front wheels. Central to this system are the drive shafts, which serve as the direct link for power transmission. Each drive shaft is equipped with two joints: an inner CV joint connecting to the gearbox and an outer CV joint located at the wheel. The outer joint is particularly critical as it allows the front wheel to steer while simultaneously transferring power, placing high demands on material quality and lubrication. Furthermore, the ABS ring is an integral part of the assembly at the wheel hub, providing vital wheel-speed data to the braking system. This entire mechanical chain must work in perfect harmony to eliminate vibrations and guarantee smooth running. Lubrication inside the CV boots is vital; if a boot splits, grease escapes and road dirt penetrates, quickly ruining the precision-ground surfaces of the constant velocity joint. Understanding this layout underlines the importance of replacing worn components promptly.

Common faults and symptoms

There are several telltale signs that the drivetrain in your Volkswagen Polo 50.1 0 is beginning to wear out. One of the most frequent symptoms is a clicking or knocking noise when taking sharp corners, which usually indicates that an outer CV joint has started to fail. This is frequently caused by a split CV boot, which exposes the joint to water and road grit. If you instead experience vibrations through the steering wheel or car chassis during acceleration, it may suggest that an inner CV joint is worn or out of balance. Another widespread problem is the ABS warning light illuminating on the dashboard, typically due to a cracked or corroded ABS ring that can no longer supply a clean signal to the sensor. Ignoring these symptoms can lead to secondary damage to the gearbox or leave your car stranded at the roadside. Early diagnosis and repair are always advisable to keep maintenance costs down and safety high.

Common parts to replace on the Volkswagen Polo 50.1 0

When it comes to servicing the Volkswagen Polo 50.1 0, certain components are subjected to more wear and tear than others. Our range focuses on the parts most frequently replaced to maintain reliable operation. Here are the key categories for your vehicle to inspect closely:

  • Drive shaft: A complete drive shaft is often the most cost-effective solution if both inner and outer joints show signs of wear, saving substantial workshop labour time during installation.
  • Outer CV joint: The most articulated component of the drivetrain, absorbing severe loads under steering and acceleration.
  • Inner CV joint: Responsible for accommodating vertical suspension travel, critical for vibration-free driving in the cabin.
  • ABS ring: A small yet essential component that ensures the braking safety systems function correctly without triggering fault codes.

Replacing these parts before total failure prevents secondary damage to other costly drivetrain components. We ensure you get parts with an accurate fit for your Polo 50.1 0, whether you need a single joint or a complete driveshaft assembly.

How to find the right part for your Volkswagen Polo 50.1 0

Go directly to the relevant category for your Volkswagen Polo 50.1 0:

On a vehicle with several possible drivetrain faults, starting in the right category saves time. By comparing the exact subcategories for the Volkswagen Polo 50.1 0, it becomes straightforward to distinguish between faults in the drive shaft, CV joint or related assemblies, guiding you to the page that best matches your symptoms and fitment.

Finding the correct replacement part for a specific model like the Volkswagen Polo 50.1 0 can seem daunting, but we have made the process straightforward and reliable. The most dependable method is to filter by your vehicle's make, model, year and engine variant. This isolates the exact components engineered for your chassis specifications. It remains vital to verify physical details such as the tooth count on an ABS reluctor ring or the overall length of a drive shaft, as variations can occur even within the same production year. If you are ever unsure which component matches your car, you can always explore our general category pages for the Volkswagen Polo to cross-reference specifications. Our catalogue is structured to eliminate guesswork, saving you both time and money. Our aim is for you to order with complete confidence and carry out the repair smoothly without frustrating surprises in the garage.

Why shop with CVJoint24

CVJoint24 is the international shop of a Swedish driveline specialist, operating with its central warehouse in Helsingborg, Sweden, and delivering across the EU. When ordering parts for your Volkswagen Polo 50.1 0 from us, you benefit from deep technical expertise and a product catalogue handpicked for durability and performance. We stand behind our accurate fitment guidance so that you can trust the car parts you order will fit properly. By helping you select the right part the first time, we minimise incorrect orders and unnecessary returns. We also appreciate how critical it is to get your vehicle back on the road quickly, maintaining swift dispatch across Europe on our stocked items. With CVJoint24, you receive reliable quality at competitive prices, backed by dedicated customer support that truly knows driveline systems inside out. Consider us your specialist partner for a smooth, dependable drive across every kilometre.

Frequently asked questions about drivetrain parts for Volkswagen Polo 50.1.0

How do I know if the drive shaft on my Polo 50.1.0 needs replacing?

The most common symptoms are vibrations during acceleration or unusual noises while driving. If you notice the car shaking excessively, it is time to check the drive shafts.

Can I replace just the outer CV joint on my Volkswagen Polo?

Yes, if the drive shaft itself is straight and undamaged, you can replace just the outer CV joint. This is often a cost-effective solution if the only issue is a clicking noise when cornering.

Why is the ABS warning light on in my Volkswagen Polo 50.1.0?

This is often caused by a cracked or corroded ABS ring at the wheel hub. A damaged ring transmits incorrect signals to the sensor, triggering the warning light.

Do all drive shafts fit every Polo model?

No, there are significant differences between various engine variants and model years. For the Polo 50.1.0, you need parts with the exact dimensions and spline count to match the gearbox.

What is included when I buy a CV joint kit from you?

Our kits are complete and contain the CV joint, CV boot, high-grade grease, circlips, and clamps for a professional installation.

How quickly will parts for my Volkswagen Polo be delivered?

We aim to dispatch all in-stock items promptly for fast delivery across Europe, ensuring you get your car back on the road as quickly as possible.