Volkswagen Polo 64.1 9 D

Spare parts and drivetrain components for the Volkswagen Polo 64.1 9 D. Select your make, model and engine to verify fitment before ordering.

Products for Volkswagen Polo 64.1 9 D

9 products
1 - 9 of 9
Item no.:0400570
  • Position: Inner
  • Seal diameter: 78 mm
  • Inner splines: 33
  • Joint diameter: 92 mm
Item no.:0520237
  • Position: Outer
  • Seal diameter: 53 mm
  • Inner splines: 30
  • Outer splines: 22
  • Joint diameter: 81 mm
Item no.:1146163
  • Position: Front left
  • Flange diameter: 92 mm
  • Total length: 515 mm
  • Splines wheel side: 22
Item no.:2159899
  • Position: Front right
  • Flange diameter: 92 mm
  • Total length: 736 mm
  • Splines wheel side: 22
Item no.:0671607
  • Position: Front
  • Diameter: 82 mm
  • Inner diameter: 22 mm
Item no.:0440555
  • Position: Inner
  • Seal diameter: 94 mm
  • Inner splines: 33
  • Number of joints: 3
  • ABS teeth: 0
Item no.:0614593
  • Inner diameter: 21 mm
  • Total length: 100 mm
Item no.:0611062
  • Position: Front
  • Diameter: 82 mm
  • Outer diameter: 22 mm

Drivetrain for Volkswagen Polo 64.1.9 D

The Volkswagen Polo 64.1.9 D represents an era of dependable German engineering where the focus was firmly on durability and economy. As one of the most appreciated diesel-powered superminis, this model requires specific components to ensure its drivetrain performs optimally under varied European conditions. The drivetrain is an intricate assembly of interacting parts that must endure heavy stresses, from the torque of the 1.9-litre engine to the mechanical forces encountered during cornering and acceleration. At CVJoint24, we understand the specific needs of Volkswagen Polo owners and supply a range tailored precisely to the 64.1.9 D variant. By investing in premium spare parts, you ensure your car maintains its hallmark reliability while avoiding costly secondary damage to the gearbox or suspension. Our technical expertise covers every component, making us your dedicated partner for all power transmission needs.

How the drivetrain is designed on the Volkswagen Polo 64.1.9 D

The layout of the drivetrain on a Volkswagen Polo 64.1.9 D is engineered to be both efficient and compact. The setup relies on a transverse engine that delivers power through a manual or automatic gearbox to the front wheels. Central to this system are the two drive shafts. A Volkswagen Polo 64.1.9 D drive shaft consists of an axle tube fitted with two joints protected by rubber CV boots. The inner joint, frequently a tripod joint, mounts to the gearbox and allows the shaft to plunge in and out as the wheels move through suspension travel. The outer constant velocity joint is a Rzeppa joint that permits wide steering angles while maintaining uniform rotational speed at the wheel. Furthermore, the drivetrain links directly to the vehicle’s safety electronics via an ABS ring for the Volkswagen Polo 64.1.9 D, which is pressed onto the outer joint. This ring is monitored by a wheel-speed sensor to deliver critical data to the ABS and stability control systems, making its condition vital for reliable braking.

Common faults and symptoms

Detecting drivetrain issues early can save significant time and money. On the Volkswagen Polo 64.1.9 D, the classic sign of a worn outer CV joint is a rhythmic clicking or knocking noise, most noticeable when turning sharply at low speeds, such as during parking manoeuvres. If the noise subsides when driving in a straight line, it clearly points to worn internal balls or tracks inside the joint, often caused by a split boot letting in road dirt. In contrast, vibrations that appear under acceleration and vanish as soon as you ease off the throttle indicate a failing inner CV joint. These vibrations can travel throughout the entire bodyshell, causing noticeable discomfort. Another frequent fault occurs when the ABS pulses under light braking on dry tarmac, or when the ABS warning light illuminates. This is commonly caused by a cracked ABS reluctor ring due to corrosion swelling underneath, altering the sensor gap and corrupting the wheel-speed signal.

Common parts to replace on the Volkswagen Polo 64.1.9 D

When carrying out drivetrain repairs on your Volkswagen Polo 64.1.9 D, several options are available depending on the extent of the wear. We supply complete drive shafts, which often prove the most cost-effective solution in terms of workshop labour, as you replace the inner joint, outer joint and axle in a single operation. For targeted repairs, we provide premium outer and inner CV joints supplied complete with CV boots, grease and fitting hardware. An often overlooked yet critical component is the ABS ring. On Polo models, rust build-up frequently cracks the ring, and installing a replacement ring alone is an economical fix to clear an ABS fault lamp. Our catalogue also includes boot kits for preventive maintenance; replacing a perishing driveshaft boot early is the most reliable way to avoid replacing the entire CV joint later. By choosing parts from our specialist inventory, you are assured components that meet or exceed original specifications for your Polo.

Finding the right part for your Volkswagen Polo 64.1.9 D

Navigate directly to the relevant section for your Volkswagen Polo 64.1.9 D:

When diagnosing drivetrain faults, starting in the correct category saves valuable time. By comparing the dedicated subcategories for the Volkswagen Polo 64.1.9 D, it becomes straightforward to distinguish between drive shaft, CV joint or propeller shaft issues, allowing you to proceed to the page that matches your car's symptoms and fitment.

Select any of these categories to review detailed product specifications and secure the exact replacement parts for your car.

Why buy from CVJoint24

Choosing CVJoint24 means relying on deep technical know-how and a dedicated focus on automotive driveline systems. We are not just a generic car parts seller; we are the international shop of a Swedish driveline specialist, operating from our central warehouse in Helsingborg and shipping across the European Union. We understand the technical nuances of the Volkswagen Polo 64.1.9 D and aim to deliver the optimal balance of quality, value and availability. By selecting your exact make, model and engine variant, you ensure accurate fitment first time, preventing wasted effort during repairs. Our streamlined logistics allow us to process orders rapidly across the continent. When you source parts from us, you receive dependable components engineered to meet the demands of modern driving, backed by specialist advice you can trust.

Frequently Asked Questions about Drivetrain Parts for Volkswagen Polo 64.1.9 D

How do I know if the drive shaft on my Polo 1.9 D needs replacing?

The most common signs are vibrations under acceleration, clicking noises when turning, or visible damage to the CV boots where grease has leaked out.

Does the same CV joint fit both the left and right side on the Polo 64.1.9 D?

Often the outer CV joints are identical on both sides, but it is essential to check specific dimensions and splines by selecting your car's exact model details.

Why is the ABS warning light illuminated on my Volkswagen Polo?

A very common cause is a cracked or corroded ABS ring on the CV joint, which disrupts the signal sent to the wheel speed sensor.

Can I replace just the CV boot instead of the entire joint?

Yes, if you catch the damage to the boot early before dirt and moisture have had time to wear out the CV joint itself, replacing just the CV boot is sufficient.

What is the difference between an inner and an outer CV joint?

The outer CV joint sits by the wheel hub and allows steering movement, whilst the inner joint sits by the gearbox and accommodates length changes as the suspension moves.

How does the fitment guarantee work at CVJoint24?

When you select your vehicle's make, model and engine, we ensure that the displayed parts fit your specific car, giving you complete peace of mind with your purchase.