Volkswagen Sharan 2.0 TDI

Drivetrain components and spare parts for the Volkswagen Sharan 2.0 TDI. Select your exact make, model and engine before ordering.

Products for Volkswagen Sharan 2.0 TDI

51 products
25 - 48 of 51
Item no.:0155326
  • Splines gearbox side: 37
  • Splines wheel side: 40
  • Total length: 125 mm
  • Seal ring diameter: 60 mm
Item no.:317291
  • Position: Front
  • Splines wheel side: 36
  • Total length: 754 mm
  • Joint diameter: 98 mm
  • Joint diameter, gearbox side: 119 mm
Item no.:0681928
  • Total length: 102 mm
Item no.:346466
  • Position: Front right, Inner
  • Inner splines: 28
  • Seal diameter: 50 mm
  • Total length: 300 mm
  • Joint diameter: 102 mm
Item no.:314419
  • Position: Front right
  • Splines wheel side: 36
  • Total length: 798 mm
  • Joint diameter: 90 mm
  • Joint diameter, gearbox side: 100 mm
Item no.:356466
  • Position: Front, Outer
  • Inner splines: 27
  • Seal diameter: 59 mm
  • Outer splines: 36
  • Thread size: M16X1,5
Item no.:314095
  • Position: Front
  • Splines wheel side: 36
  • Total length: 480 mm
  • Joint diameter: 110 mm
  • ABS teeth: 28
Item no.:110509
  • Position: Front left
  • Splines gearbox side: 40
  • Splines wheel side: 36
  • Total length: 500 mm
  • Joint diameter: 98 mm
Item no.:0462380
  • Position: Inner
  • Inner splines: 34
  • Seal diameter: 123 mm
  • Total length: 84 mm
  • Joint diameter: 104 mm
Item no.:113123
  • Position: Front left
  • Splines wheel side: 36
  • Diameter 1: 98 mm
Item no.:2189336
  • Position: Front right
  • Splines wheel side: 36
  • Joint diameter: 98 mm
Item no.:310649
  • Position: Front
  • Splines wheel side: 38
  • Total length: 505 mm
  • Joint diameter: 102 mm
  • ABS teeth: 48
Item no.:315268
  • Position: Front
  • Splines gearbox side: 37
  • Splines wheel side: 26
  • Seal ring diameter: 60 mm
  • Thread size: M8x83
Item no.:2151978
  • Position: Front right
  • Total length: 365 mm
Item no.:0697702
  • Total length: 86 mm
Item no.:0965141
  • Inner diameter: 35 mm
  • Outer diameter: 62 mm
Item no.:341472
  • Position: Inner
  • Inner splines: 34
  • Seal diameter: 119 mm
  • Total length: 78 mm
  • Joint diameter: 119 mm
Item no.:0106724
  • Position: Front right
  • Splines gearbox side: 30
  • Splines wheel side: 0
  • Total length: 413 mm
Item no.:0660112
  • Total length: 147 mm
  • Thread size: M22x1,5
  • Inner diameter: 29 mm
Showing 25–48 of 51 products

Drivetrain for Volkswagen Sharan 2.0 TDI

The Volkswagen Sharan 2.0 TDI is a model that pairs generous cabin space with power, making it a popular choice for busy families and drivers needing extra load capacity. However, this heavy body combined with the robust torque output of the 2.0 TDI engine places considerable demands on the vehicle's drivetrain. Power transmission must function smoothly to propel the car safely and reliably in all driving conditions. At CVJoint24, you will find a carefully selected range of components engineered specifically to withstand the stresses encountered by this particular version.

Our focus is on supplying parts that not only fit physically, but also match or exceed the quality of original equipment. Because the Sharan is frequently used for long journeys and carrying heavy payloads, it is essential that components such as drive shafts and constant velocity joints are manufactured from robust materials to exacting tolerances. We have assembled dedicated parts for this model so you can find exactly what you need to preserve the car's dependability and driving comfort over time.

How the drivetrain is configured on the Volkswagen Sharan 2.0 TDI

The drivetrain on a Volkswagen Sharan 2.0 TDI is a sophisticated setup typically based on a transverse engine with front-wheel drive, although certain variants feature all-wheel drive. The system consists of several critical components that work in unison to transfer torque from the gearbox to the wheels. Central to this arrangement are the drive shafts, which on the Sharan are sized to handle the characteristic torque delivery of the diesel engine. The driveshafts feature two distinct joints: an inner joint at the gearbox and an outer joint at the wheel hub.

The inner joint is frequently a tripod design to accommodate the axial plunging movements generated as the suspension travels, whilst the outer joint is a Rzeppa joint that permits large steering angles without binding. On the Volkswagen Sharan 2.0 TDI, an ABS ring is also commonly fitted on the outer CV joint or drive shaft, supplying essential wheel speed signals to the car's active safety systems. Understanding this layout is invaluable when diagnosing faults, as distinct vibrations or noises can usually be traced back to specific components along this assembly.

Common faults and symptoms

There are several telltale signs that drivetrain components on your Volkswagen Sharan 2.0 TDI are beginning to fail. One of the most prevalent symptoms is a distinct clicking or knocking noise when turning on full lock at lower speeds, such as during parking manoeuvres. This almost invariably points to a worn outer CV joint requiring replacement. If you instead experience shaking or shuddering through the car floor under acceleration—particularly at motorway speeds or under heavy load—the inner CV joint is typically at fault.

Another common issue on the Sharan is the ABS warning light illuminating or the ABS triggering unexpectedly under gentle braking. This is often caused by a cracked or corroded ABS reluctor ring, which prevents the wheel sensor from reading rotational speed correctly. It is equally important to inspect the CV boots regularly; a torn boot allows grease to escape and road dirt to penetrate, quickly ruining even a brand-new joint. By staying alert to these symptoms, you can rectify driveline faults before they cause costlier secondary damage or leave you stranded.

Common parts to replace on the Volkswagen Sharan 2.0 TDI

To help you maintain your car efficiently, we have organised our range so you can quickly browse to the relevant product group. For the Volkswagen Sharan 2.0 TDI, our selection is structured as follows:

  • Drive shafts for Volkswagen Sharan 2.0 TDI (13 distinct versions for an accurate fit)
  • Outer CV joints for Volkswagen Sharan 2.0 TDI (2 high-quality options)
  • Inner CV joints for Volkswagen Sharan 2.0 TDI (multiple variants for different gearbox types)
  • ABS rings for Volkswagen Sharan 2.0 TDI (1 dedicated specification for correct sensor feedback)

Drive shafts form our most comprehensive category because specifications vary depending on whether the car uses a manual or automatic (DSG) gearbox, alongside differences between the left and right sides. Replacing a complete driveshaft can often prove far more time-efficient than overhauling a single joint, especially if multiple components along the shaft exhibit wear. Our inner joints are specifically selected to eliminate the annoying vibrations that can afflict hard-working TDI models under load.

How to find the right part for your Volkswagen Sharan 2.0 TDI

Navigate directly to the appropriate component category for your Volkswagen Sharan 2.0 TDI:

On a vehicle with several potential driveline issues, it makes sense to head straight to the right subcategory. By comparing the exact areas for the Volkswagen Sharan 2.0 TDI, it becomes easier to differentiate between drive shaft, CV joint, or prop shaft issues and to proceed to the page that best matches your symptoms and fitment.

Selecting the correct replacement part for a Volkswagen Sharan 2.0 TDI can sometimes appear complicated due to technical revisions introduced during the model's production run. You may find differences in the number of splines on the drive shaft or variations in joint diameter depending on the exact build date and trim level. To eliminate uncertainty, use our vehicle filter to select your make, model and engine, ensuring you view only the items compatible with your car.

If you are still unsure about component compatibility, we suggest checking the original part number stamped on your existing unit or counting the spline teeth on the old joint. Our customer service team consists of driveline specialists who are glad to assist in verifying dimensions before you finalise your order. With our support, you can be sure of receiving the correct part the first time, saving both workshop hours and repair costs.

Why shop with CVJoint24

When you purchase from CVJoint24, you are choosing an international shop powered by a Swedish driveline specialist with in-depth knowledge of vehicle power transmission. Rather than acting as a general motor factor stocking thousands of unrelated lines, we focus entirely on the drivetrain to provide exceptional technical expertise and a targeted range. For your Volkswagen Sharan 2.0 TDI, this ensures you receive components tested to meet the high demands of a heavy diesel vehicle, combining durability with competitive pricing.

We know that when your vehicle is off the road, you require replacement parts without delay. That is why we ship promptly from our central warehouse in Helsingborg, Sweden, to customers across Europe. Combined with dedicated technical support, an extensive specialist inventory and dependable fitment, we are the obvious source for your Volkswagen Sharan 2.0 TDI driveline spare parts.

Frequently asked questions about drivetrain parts for Volkswagen Sharan 2.0 TDI

How do I know whether the inner or outer CV joint is failing on my Sharan 2.0 TDI?

A worn outer CV joint typically produces a clicking or knocking noise when cornering at low speeds. A worn inner CV joint causes vibrations through the car under acceleration, whether driving straight ahead or turning.

Does the same drive shaft fit both manual and DSG gearboxes on the Sharan 2.0 TDI?

No, drive shafts usually differ depending on the gearbox type. It is therefore vital to select your car's make, model, year and engine or check your gearbox code before ordering.

Why has the ABS warning light come on in my Volkswagen Sharan?

On the Sharan 2.0 TDI, it is common for the ABS ring on the drive shaft to crack due to corrosion. This prevents the sensor from reading the wheel speed correctly, triggering the warning light.

Can I replace just the CV boot if it is split?

Yes, if you catch the damage early and the joint is still quiet and free from dirt inside, you can replace just the CV boot. However, if grit or moisture has already entered, replacing the complete joint is strongly recommended.

How many splines does a CV joint have on a Sharan 2.0 TDI?

The spline count varies between model years and engine variants. Select your car's exact model, year and engine details in our shop to see the precise specifications for your CV joints.

Is it difficult to replace a drive shaft on a Sharan yourself?

It requires appropriate tools and mechanical experience, but it is certainly doable for a capable DIY mechanic. Always remember to compare the new drive shaft with the old one to ensure they are identical before starting installation.