Volkswagen Sharan 2.8 V6.24v 4MOTION

Spare parts and drivetrain components for the Volkswagen Sharan 2.8 V6.24v 4MOTION. Select your vehicle make, model and engine to verify fitment before ordering.

Products for Volkswagen Sharan 2.8 V6.24v 4MOTION

30 products
1 - 24 of 30
Item no.:0322159
  • ABS teeth: 48
  • Inner diameter: 79 mm
  • Outer diameter: 83 mm
  • Width: 12 mm
Item no.:0525508
  • Position: Outer
  • Inner splines: 36
  • Seal diameter: 60 mm
  • Outer splines: 38
  • ABS teeth: 48
Item no.:0176281
  • Position: Front right
  • Total length: 233 mm
  • Thread size: M8x83
Item no.:0436743
  • Position: Front right, Inner
  • Total length: 129 mm
  • Outer splines: 26
Item no.:2142384
  • Position: Front right
  • Splines gearbox side: 30
  • Splines wheel side: 38
  • Total length: 560 mm
  • ABS teeth: 48
Item no.:3136414
  • Position: Front
  • Splines wheel side: 38
  • Total length: 505 mm
  • Joint diameter: 102 mm
  • ABS teeth: 48
Item no.:3124125
  • Position: Front
  • Splines wheel side: 38
  • Total length: 485 mm
  • Joint diameter: 102 mm
  • ABS teeth: 48
Item no.:0640114
  • Total length: 113 mm
Item no.:340019
  • Position: Inner
  • Inner splines: 34
  • Splines gearbox side: 35
Item no.:343613
  • Position: Inner
  • Inner splines: 34
  • Total length: 33 mm
  • Joint diameter: 112 mm
  • Outer splines: 34
Item no.:0488569
  • Position: Inner
  • Inner splines: 28
  • Seal diameter: 42 mm
  • Outer splines: 35
Item no.:6548866
  • Position: Outer
  • Inner splines: 25
  • Splines wheel side: 38
  • Outer diameter: 94 mm
  • ABS teeth: 48
Item no.:0482164
  • Position: Inner
  • Inner splines: 34
  • Seal diameter: 123 mm
  • Total length: 84 mm
  • Joint diameter: 104 mm
Item no.:519560
  • Position: Rear right
  • Splines wheel side: 38
  • Total length: 477 mm
  • Diameter 1: 94 mm
  • ABS teeth: 48
Item no.:410242
  • Position: Rear left
  • Splines wheel side: 38
  • Total length: 628 mm
  • Joint diameter: 94 mm
  • ABS teeth: 48
Item no.:318934
  • Position: Front
  • Splines gearbox side: 37
  • Splines wheel side: 26
  • Seal ring diameter: 60 mm
  • Thread size: M8x83
Item no.:2126119
  • Position: Front right
  • Total length: 365 mm
Item no.:2190849
  • Position: Front right
  • Splines wheel side: 38
  • Total length: 560 mm
  • Joint diameter: 100 mm
  • ABS teeth: 48
Item no.:516151
  • Position: Rear right
  • Splines wheel side: 38
  • Total length: 477 mm
  • Joint diameter: 94,5 mm
  • ABS teeth: 48
Item no.:316168
  • Position: Front
  • Splines wheel side: 38
  • Total length: 486 mm
  • Joint diameter: 100 mm
  • ABS teeth: 48
Showing 1–24 of 30 products

Drivetrain for Volkswagen Sharan 2.8 V6.24v 4MOTION

The Volkswagen Sharan 2.8 V6.24v 4MOTION is a technically advanced vehicle where the drivetrain plays a crucial role in overall performance and safety. With its powerful V6 engine and intelligent 4MOTION all-wheel-drive system, extremely high demands are placed on every individual power transmission component. As a Swedish driveline specialist, we understand the importance of ensuring that every part, from the smallest ABS ring to the complete drive shaft, meets the highest quality standards. Maintaining the drivetrain on a four-wheel-drive Sharan demands specific expertise and the right spare parts, as mechanical loads are significantly higher than on front-wheel-drive models.

We provide a comprehensive range carefully selected to meet the exact technical specifications of this engine and driveline setup. By investing in quality parts from us, you ensure your car retains its original driving dynamics while minimising the risk of costly consequential damage. Our aim is to deliver the expertise and products required to keep your Volkswagen dependable for years to come, whatever the road conditions or payload.

How the drivetrain is configured on the Volkswagen Sharan 2.8 V6.24v 4MOTION

The drivetrain layout on the Volkswagen Sharan 2.8 V6.24v 4MOTION is a sophisticated design engineered to distribute power optimally between all four wheels. The system starts at the transversely mounted V6 engine, which delivers drive forward and aft via the gearbox and a transfer box. The central component for transferring power to the rear is a propeller shaft, running underneath the vehicle to the rear differential. At each wheel assembly, drive shafts are fitted with both inner and outer CV joints.

The outer CV joints are designed to cope with large operating angles during steering, whilst the inner joints absorb the axial movement generated as the suspension travels up and down. This entire setup is monitored by sensors reading wheel speed from ABS rings on each wheel hub. A damaged ABS ring can prevent the all-wheel-drive system from regulating power delivery correctly, impacting both traction and stability. Understanding this complex interaction is vital when selecting the correct spare parts for maintenance or repairs.

Common faults and symptoms

There are several typical warning signs of drivetrain wear that owners of a Volkswagen Sharan 2.8 V6.24v 4MOTION should look out for to avoid breakdowns. One of the most classic symptoms is a rhythmic clicking noise heard clearly when negotiating sharp turns at low speeds. This noise almost exclusively stems from a worn outer CV joint where the ball tracks have degraded due to dirt ingress or insufficient lubrication. If you experience severe body vibrations under acceleration instead, particularly at motorway speeds or under heavy load, an inner constant velocity joint is often the culprit.

On 4MOTION models, it is equally important to listen for noises coming from the centre of the car, which can point to worn universal joints or a failing propeller shaft centre bearing. Another common fault is an illuminated ABS warning lamp or erratic traction-control intervention, frequently caused by a cracked or corroded ABS reluctor ring. Identifying these symptoms early allows you to replace components before total failure leaves you stranded. Regular inspection of your CV boots is also essential to keep grit and water from ruining the joints.

Common parts to replace on the Volkswagen Sharan 2.8 V6.24v 4MOTION

When maintaining a Volkswagen Sharan 2.8 V6.24v 4MOTION, certain components require replacement more frequently due to the high engine torque and substantial kerb weight. Our range is tailored to meet these demands with absolute precision. Driveshafts are a core focus, and we supply multiple variants covering all positions on the vehicle. Here are the main parts our customers look for:

  • Complete drive shafts that replace inner joints, outer joints and the shaft itself in one go.
  • Outer CV joint kits including CV boot, grease and circlips for a comprehensive overhaul.
  • Inner CV joints, essential for eliminating driveline vibrations.
  • Propeller shafts and associated fittings to guarantee smooth, vibration-free drive to the rear axle.
  • ABS rings with the exact tooth count to maintain correct communication with the vehicle safety systems.

Every component in our catalogue is chosen for durability and precise fitment. We always advise checking the condition of the drive shaft boots regularly, as a split boot quickly leads to joint destruction caused by road dirt and moisture.

How to find the right part for your Volkswagen Sharan 2.8 V6.24v 4MOTION

Navigate to the specific component category for your Volkswagen Sharan 2.8 V6.24v 4MOTION:

On a vehicle with multiple potential driveline issues, it pays to start in the correct category straight away. By comparing the exact sections for the Volkswagen Sharan 2.8 V6.24v 4MOTION, it becomes easy to distinguish between drive shaft, CV joint or prop shaft problems and continue to the section that best matches your symptoms and fitment requirements.

Our database is updated continuously to ensure we always supply the exact part for your vehicle. If you are unsure about any specification, our team is on hand to guide you, ensuring your repair is done right first time.

Why shop with CVJoint24

Choosing CVJoint24 as your driveline parts supplier gives you access to specialist expertise and an extensive product range. We are not simply an online retailer; we are driveline specialists committed to power transmission and engineering accuracy. For owners of the Volkswagen Sharan 2.8 V6.24v 4MOTION, we offer high-grade parts matched with detailed model knowledge. We understand the specific demands of four-wheel-drive vehicles and stock our central Swedish warehouse accordingly.

Our fitment guarantee takes the guesswork out of ordering, which is especially reassuring when dealing with complex systems like 4MOTION. When you buy from us, you can trust that every part meets or exceeds OEM specifications, delivering long-term reliability and complete peace of mind. We are your driveline specialist, putting vehicle performance and customer satisfaction first across Europe.

Frequently asked questions about the drivetrain for Volkswagen Sharan 2.8 V6.24v 4MOTION

How do I know if the drive shaft fits my Sharan 4MOTION?

Select your make, model and engine variant in our search selector to ensure an exact fit for your Volkswagen Sharan 2.8 V6.24v 4MOTION.

What are the symptoms of a worn outer CV joint?

A clicking or knocking noise when taking sharp turns is the most common sign that the outer CV joint needs replacing.

Why does my car vibrate under acceleration?

Vibrations under load are often caused by wear in the inner CV joint or an imbalance in the propeller shaft on 4MOTION models.

Are fitting accessories included with the CV joint?

Yes, our CV joints are normally supplied as complete kits with a CV boot, grease and the necessary fitting hardware.

How does a damaged ABS ring affect the four-wheel drive?

A faulty ABS ring sends incorrect wheel speed signals, which can disrupt the 4MOTION system's ability to distribute power properly.

Can I replace just the propeller shaft centre bearing?

In some cases this is possible, but it is often recommended to inspect the entire prop shaft to ensure no imbalances remain.