Volkswagen Touareg 4.2 V8 FSI

Spare parts and drivetrain components for the Volkswagen Touareg 4.2 V8 FSI. Confirm fitment using your make, model and engine before ordering.

Products for Volkswagen Touareg 4.2 V8 FSI

27 products
1 - 24 of 27
Item no.:6161822
  • Position: Rear
  • Splines wheel side: 30
  • Total length: 724 mm
  • Joint diameter: 108 mm
  • Joint diameter, gearbox side: 116 mm
Item no.:0224045
  • Position: Front right
  • Bearing thickness: 68 mm
  • Height: 30 mm
Item no.:0506102
  • Position: Outer
  • Inner splines: 27
  • Seal diameter: 64 mm
  • Outer splines: 30
  • Thread size: M24X1,5
Item no.:0270867
  • Position: Rear
  • Total length: 1,246 mm
  • Number of joints: 2
  • Number of centre bearings: 1
Item no.:0231056
  • Position: Front
  • Total length: 632 mm
  • Number of joints: 2
  • Outer diameter 1: 99,5 mm
  • Bolt circle diameter 1: 86 mm
Item no.:3107082
  • Position: Front
  • Splines wheel side: 30
  • Total length: 525 mm
  • Joint diameter: 100 mm
  • Joint diameter, gearbox side: 112 mm
Item no.:6196130
  • Position: Rear
  • Splines wheel side: 30
  • Total length: 736 mm
  • Joint diameter: 98 mm
  • Joint diameter, gearbox side: 108 mm
Item no.:345685
  • Position: Inner
  • Inner splines: 28
  • Seal diameter: 112 mm
  • Total length: 34 mm
  • Joint diameter: 112 mm
Item no.:358458
  • Position: Outer
  • Inner splines: 28
  • Splines wheel side: 30
  • Seal diameter: 64 mm
  • Outer splines: 30
Item no.:610772
  • Position: Rear
  • Splines gearbox side: 37
  • Splines wheel side: 30
  • Total length: 865 mm
  • Joint diameter: 100 mm
Item no.:0678322
  • Position: Front
Item no.:323457
  • Position: Front
  • Total length: 670 mm
  • Number of joints: 2
  • Outer diameter 1: 29,15 mm
  • Outer diameter 2: 27 mm
Item no.:0594273
  • Position: Outer
  • Inner splines: 28
  • Splines wheel side: 30
  • Outer diameter: 94 mm
Item no.:6589852
  • Position: Outer
  • Inner splines: 30
  • Splines wheel side: 30
  • Outer diameter: 108 mm
Item no.:0400911
  • Position: Front, Inner
  • Inner splines: 28
  • Outer diameter: 112 mm
Item no.:326938
  • Position: Front
  • Total length: 655 mm
Item no.:649980
  • Position: Rear, Inner
  • Inner splines: 30
  • Total length: 30,5 mm
Item no.:646022
  • Position: Rear, Inner
  • Inner splines: 28
  • Splines gearbox side: 28
  • Outer diameter: 110 mm
Item no.:0690527
  • Total length: 102 mm
Item no.:0644827
  • Total length: 125 mm
Item no.:653450
  • Position: Rear, Outer
  • Inner splines: 29
  • Seal diameter: 64 mm
  • Outer splines: 30
  • Joint diameter: 98 mm
Showing 1–24 of 27 products

Drivetrain for Volkswagen Touareg 4.2 V8 FSI

The Volkswagen Touareg 4.2 V8 FSI is a car that combines luxury with raw strength. With a potent V8 engine under the bonnet, substantial torque is generated that must be channelled efficiently to all four wheels. The drivetrain in this model is engineered to cope with both motorway cruising and tougher off-road terrain, but these enormous forces also cause natural wear on components such as drive shafts and propeller shafts. Maintaining the drivetrain is vital to preserve the car's driving dynamics and safety. At CVJoint24, you will find the specific parts required to keep your Touareg delivering the power and comfort you expect.

We focus on high quality and precise fitment, which is especially important for a technically advanced vehicle like the Touareg 4.2 V8 FSI. By choosing the right components, you reduce the risk of secondary damage to the gearbox and differentials, saving both time and money in the long run. Our range is handpicked to meet the demands placed on a heavy SUV with high output, ensuring that every part performs reliably under pressure.

How the drivetrain is engineered on the Volkswagen Touareg 4.2 V8 FSI

The layout of the drivetrain on a Volkswagen Touareg 4.2 V8 FSI is complex and robust. The system relies on permanent four-wheel drive that distributes power between the front and rear axles via a centre differential. Power transmission from the gearbox runs via a propeller shaft along the underside of the car. Heavy-duty drive shafts are then used to transfer power onwards to the wheels. The front axle features two driveshafts equipped with inner and outer CV joints to accommodate both suspension movement and steering.

The outer CV joint is particularly heavily stressed, as it must handle large angles at full steering lock while dealing with the V8 engine's torque. The rear axle is likewise fitted with drive shafts that ensure power reaches the road without losses. The entire system is finely calibrated to provide optimum traction in all conditions, making the choice of replacement car parts critical so as not to upset the balance of the vehicle's advanced traction and stability control systems. Proper lubrication and intact CV boots are fundamental for these components to perform without issues over time.

Common faults and symptoms

Symptoms of drivetrain faults on a Touareg 4.2 V8 FSI can vary, but they are often clear. One of the most common issues is vibration felt through the bodyshell or seat under acceleration or at specific road speeds. This often points to imbalance or wear in the prop shaft, particularly in its centre bearing or universal joints. Another classic warning sign is a clicking or knocking sound on full steering lock, which is almost exclusively caused by a worn outer constant velocity joint on the Volkswagen Touareg 4.2 V8 FSI.

If you experience vibrations that increase with road speed, it can also stem from an unbalanced or damaged drive shaft. It is important to act quickly when these symptoms appear; a torn CV boot leaking grease quickly allows dirt to penetrate the joint, resulting in complete failure. Identifying these signs early helps you prevent expensive garage repairs and ensures your Volkswagen remains safe on the road. Regular inspection of the drivetrain rubber gaiters is inexpensive insurance against future breakdowns.

Common parts to replace on the Volkswagen Touareg 4.2 V8 FSI

For the Volkswagen Touareg 4.2 V8 FSI, specific components require attention more frequently due to the vehicle's weight and power output. In our range, we have selected the most critical car parts for this engine variant. We currently offer a focused selection covering the most common maintenance and repair needs for the power transfer system.

  • Drive shafts: We stock several drive shaft variants to cover different positions and specifications on the vehicle.
  • Outer CV joints: We supply high-quality outer constant velocity joints engineered to withstand the loads generated by the V8 engine during hard acceleration and cornering.
  • Propeller shafts: With 2 available prop shaft options, we meet the needs for curing vibrations in the central section of the drivetrain.

These parts are chosen to meet or exceed original equipment specifications. Because the Touareg is a heavy vehicle with exceptional performance, choosing parts matched precisely to the 4.2 V8 FSI variant is essential to guarantee long-lasting durability and operation.

How to find the right part for the Volkswagen Touareg 4.2 V8 FSI

Navigate directly to the relevant subcategory for your Volkswagen Touareg 4.2 V8 FSI:

On a vehicle with several potential drivetrain issues, it pays to start in the correct category right away. Comparing the exact part categories for the Volkswagen Touareg 4.2 V8 FSI makes it easier to tell whether the fault lies with a drive shaft, CV joint or propeller shaft, taking you directly to the page that best matches your symptoms and fitment.

Check technical data such as the number of splines (teeth) on the CV joints and the overall shaft length if you are unsure. Our customer support team is also on hand to help verify fitment using your chassis number if there are multiple options for your model year. We aim to help you choose the right part straight away, avoiding awkward returns.

Why shop with CVJoint24

CVJoint24 is the international shop of a Swedish driveline specialist, with our central warehouse located in Helsingborg, Sweden. We understand that owners of a Volkswagen Touareg 4.2 V8 FSI demand high standards for both part quality and dispatch speed. That is why we provide an extensive range focusing on precise fitment and lasting durability. When you shop with us, you receive not only quality spare parts, but also access to our specialist know-how in drivetrain components.

You can reliably select the correct parts by choosing your car's exact make, model and engine, giving you a smooth and dependable purchasing experience. Shipping directly across the EU, we help ensure your car does not spend unnecessary time sitting in the garage. We are passionate specialists dedicated to keeping European cars running with the right parts at the right price. Choose CVJoint24 for a hassle-free order and components built to handle your Touareg V8.

Frequently Asked Questions about Drivetrain Parts for the Volkswagen Touareg 4.2 V8 FSI

How do I know if the propeller shaft on my Touareg V8 FSI is failing?

The most common signs are vibrations felt through the floor or through your seat, particularly under acceleration or at speeds between 60 and 90 km/h. This is often caused by a worn centre bearing or an imbalance in the prop shaft itself.

Does the same drive shaft fit all Volkswagen Touareg models?

No, drive shafts vary depending on the engine option and gearbox. The 4.2 V8 FSI has specific strength and dimension requirements. Always select your exact make, model and engine to find the right part.

What is included when I buy an outer CV joint for my Touareg?

Our CV joint kits come complete with the joint itself, a model-specific CV boot, high-quality grease, circlips and the necessary clamps for a complete installation.

Why is there a clicking noise on full steering lock?

This is a classic symptom of a worn outer CV joint. As the balls inside the joint wear, play develops, producing a clicking noise whenever the joint operates at an angle.

Can I replace just the CV boot if it is split?

Yes, if you catch the damage early before dirt and moisture have entered the joint, replacing the CV boot and applying fresh grease is often sufficient. If the constant velocity joint has already started making noise, the entire joint must be replaced.

Do you offer a guaranteed fit for Touareg V8 parts?

Yes, when you choose your vehicle's make, model and engine and pick a part recommended for your Volkswagen Touareg 4.2 V8 FSI, your purchase is backed by our fitment guarantee.