Volvo 940 2.0 Turbo
Spare parts and drivetrain components for Volvo 940 2.0 Turbo. Check fitment by selecting your make, model and engine before ordering.
Products for Volvo 940 2.0 Turbo
- Position: Front left
- Splines gearbox side: 24
- Splines wheel side: 36
- Total length: 535 mm
- Position: Front right
- Splines gearbox side: 26
- Splines wheel side: 36
- Total length: 1,005 mm
- ABS teeth: 48
- Position: Front right
- Splines gearbox side: 26
- Splines wheel side: 36
- Total length: 987 mm
- Thread size: M10x1.5
- Position: Front left, Inner
- Inner splines: 26
- Seal diameter: 31 mm
- Total length: 158,5 mm
- Joint diameter: 85 mm
- Position: Rear, Inner
- Inner splines: 29
- Splines gearbox side: 26
- Seal diameter: 35 mm
- Outer diameter: 71 mm
- Position: Inner
- Inner splines: 27
- Seal diameter: 36 mm
- Total length: 133 mm
- Joint diameter: 94 mm
- Position: Rear, Outer
- Inner splines: 29
- Splines wheel side: 36
- Seal diameter: 56 mm
- ABS teeth: 88
Drivetrain for Volvo 940 2.0 Turbo
The Volvo 940 2.0 Turbo is an iconic model that represents the peak of Volvo's rear-wheel-drive era. To maintain the performance and reliability that define this car, a properly functioning drivetrain is absolutely essential. The power transmission in a Turbo model is subjected to considerable strain, especially when on boost and torque reaches its peak. At CVJoint24, we understand the specific requirements of the Volvo 940 and provide components engineered to meet or exceed original equipment specifications. By investing in quality parts, you ensure your car remains a reliable companion on the road, whether for daily commuting or longer journeys. Our range is carefully selected to meet the exact demands of this engine variant, focusing on durability and precision.
How the drivetrain is built on the Volvo 940 2.0 Turbo
The drivetrain on a Volvo 940 2.0 Turbo is a mechanical symphony starting at the longitudinally mounted engine. Power flows through the gearbox to a two-piece propeller shaft, which in turn delivers torque to the rear axle and differential. This design is renowned for its robustness but requires every component to be in perfect balance. The centre bearing, mounted at the midpoint of the prop shaft, plays a vital role in minimising vibrations and keeping the shaft centred during operation. For the 2.0 Turbo model, it is especially important that these components are in top condition, as the extra output from the turbocharged engine can amplify even minor imbalances in the system. Understanding how these parts interact is key to pinpointing where a problem arises and how best to rectify it to restore the original driving feel.
Common faults and symptoms
Symptoms of a failing drivetrain on a Volvo 940 2.0 Turbo can vary, but the most distinct signs usually involve vibrations and abnormal noises. If you experience shaking through the vehicle body at speeds between 70 and 90 km/h, this is often a sign of an unbalanced propeller shaft or a worn centre bearing. Another common symptom is a metallic clunking sound when engaging gear or releasing the clutch, which can indicate worn universal joints. For Turbo owners, it is also crucial to watch for vibrations under hard acceleration, as this places maximum load on the driveline. Ignoring these warning signs can allow vibrations to damage adjacent components, such as the gearbox output shaft or the rear axle pinion bearing, resulting in far more complex and expensive repairs.
Common parts to replace on the Volvo 940 2.0 Turbo
When maintaining your Volvo 940 2.0 Turbo, certain components face greater wear and tear than others. The central part in our range for this model is a complete propeller shaft for Volvo 940 2.0 Turbo. Replacing the entire shaft is often the most effective solution for eliminating stubborn vibrations that persist after only swapping smaller parts. Alongside the prop shaft, it is essential to inspect the centre bearing and its rubber mounting regularly. Our range for this model includes:
- Propeller shaft for Volvo 940 2.0 Turbo
How to find the right part for your Volvo 940 2.0 Turbo
Proceed to the relevant section for your Volvo 940 2.0 Turbo:
On a vehicle with several possible drivetrain issues, it pays to start in the correct category right away. By checking the specific component sections for the Volvo 940 2.0 Turbo, it becomes easier to distinguish between drive shaft, CV joint or propeller shaft issues and continue to the page that best matches your symptoms and fitment.
Navigating the range of spare parts requires accuracy, particularly on a car produced in so many versions as the Volvo 940. To ensure you choose the right part straight away, select your car's exact make, model and engine variant on cvjoint24.com. Our system filters the catalogue to show the parts that are genuinely compatible with your Volvo 940 2.0 Turbo. This is especially vital for propeller shafts, where length and flange configurations differ between gearbox options such as the M46, M47 or automatic transmissions. We also recommend checking the technical specifications we provide to confirm the component matches the one fitted to your car. With our help, finding the right All car makes parts is simple, reliable and straightforward, saving you both time and money.
Why shop at CVJoint24
Choosing CVJoint24 as your spare parts supplier gives you direct access to Swedish driveline expertise. We are not just an online retailer; we are driveline specialists committed to keeping your Volvo 940 2.0 Turbo running smoothly. Backed by our fitment guarantee, you can shop with complete peace of mind, while our logistics ensure fast, dependable dispatch from our Swedish warehouse across the EU. We stock premium-quality parts engineered to handle tough driving conditions and demanding climates. By ordering from us, you always get the right part at the right price, supported by customer service that truly understands older performance models. We aim to be the natural choice for anyone looking for quality and expert advice on essential vehicle transmission components.
Frequently asked questions about the drivetrain for Volvo 940 2.0 Turbo
How do I know if the propeller shaft on my Volvo 940 2.0 Turbo is failing?
The most common signs are body vibrations at specific speeds, often between 70–90 km/h, as well as clunking noises when changing gear or accelerating.
Is there a difference between the propeller shaft for a Turbo and naturally aspirated models?
Yes, Turbo models often have heavier-duty dimensions or specific flanges to handle the higher torque, so it is vital to select the correct variant.
How do I find parts that fit my car?
Simply select your car's make, model and engine variant in our store to quickly filter out the parts that fit your exact Volvo 940 2.0 Turbo.
What is included with a complete propeller shaft from CVJoint24?
Our complete propeller shafts are supplied fully balanced and ready to fit, usually including universal joints and in many cases a pre-assembled centre bearing.
How does the turbo engine affect drivetrain wear?
The turbo engine's higher torque puts greater stress on the prop shaft joints and centre bearing, which can lead to faster wear compared to less powerful engine options.
How quickly can my parts be delivered?
We dispatch quickly from our Swedish central warehouse across the EU, helping you get your Volvo 940 back on the road without unnecessary delay.