Volvo S60 T3

Spare parts and drivetrain components for Volvo S60 T3. Confirm fitment by selecting your make, model, and engine before ordering.

Products for Volvo S60 T3

47 products
1 - 24 of 47
Item no.:0326502
  • ABS teeth: 48
  • Inner diameter: 72 mm
  • Outer diameter: 81 mm
  • Width: 8,35 mm
Item no.:0530418
  • Position: Outer
  • Inner splines: 28
  • Seal diameter: 58 mm
  • Outer splines: 40
  • Thread size: M10x1,5
Item no.:0574894
  • Position: Outer
  • Inner splines: 26
  • Seal diameter: 57,5 mm
  • Outer splines: 40
  • Thread size: M10X1,5
Item no.:1152030
  • Position: Front left
  • Splines gearbox side: 26
  • Splines wheel side: 40
  • Total length: 604 mm
  • Joint diameter: 92 mm
Item no.:2123215
  • Position: Front right
  • Splines gearbox side: 26
  • Splines wheel side: 40
  • Total length: 955 mm
  • Joint diameter: 92 mm
Item no.:2165835
  • Position: Front right
  • Splines gearbox side: 26
  • Splines wheel side: 40
  • Total length: 953 mm
  • Joint diameter: 85 mm
Item no.:2193505
  • Position: Front right
  • Splines gearbox side: 28
  • Splines wheel side: 40
  • Total length: 952 mm
Item no.:1175049
  • Position: Front left
  • Splines gearbox side: 28
  • Splines wheel side: 40
  • Total length: 594 mm
  • Joint diameter: 91 mm
Item no.:147467
  • Position: Inner
  • Inner splines: 26
  • Seal diameter: 31 mm
  • Total length: 158,5 mm
  • Joint diameter: 85 mm
Item no.:645337
  • Position: Rear, Inner
  • Inner splines: 29
  • Splines gearbox side: 26
  • Seal diameter: 35 mm
  • Outer diameter: 71 mm
Item no.:148523
  • Position: Inner
  • Inner splines: 27
  • Seal diameter: 36 mm
  • Total length: 133 mm
  • Joint diameter: 94 mm
Item no.:146105
  • Position: Inner
  • Inner splines: 28
  • Splines gearbox side: 28
  • Total length: 175 mm
Item no.:242900
  • Position: Inner
  • Inner splines: 28
  • Splines gearbox side: 28
  • Total length: 540 mm
Item no.:147788
  • Position: Inner
  • Inner splines: 24
  • Splines gearbox side: 26
  • Seal diameter: 31 mm
  • Total length: 165 mm
Item no.:245118
  • Position: Inner
  • Inner splines: 24
  • Splines gearbox side: 26
  • Total length: 550 mm
Item no.:657693
  • Position: Rear, Outer
  • Inner splines: 29
  • Splines wheel side: 36
  • Seal diameter: 56 mm
  • ABS teeth: 88
Item no.:3516888
  • Position: Outer
  • Inner splines: 23
  • Splines wheel side: 36
  • Seal diameter: 56 mm
  • Outer diameter: 82 mm
Item no.:253197
  • Position: Outer
  • Inner splines: 24
  • Seal diameter: 56 mm
  • Outer splines: 36
  • Thread size: M10
Item no.:3599168
  • Position: Outer
  • Inner splines: 27
  • Seal diameter: 56 mm
  • Outer splines: 36
  • ABS teeth: 48
Item no.:3574739
  • Position: Outer
  • Inner splines: 33
  • Seal diameter: 56 mm
  • Outer splines: 36
  • ABS teeth: 48
Item no.:351852
  • Position: Outer
  • Inner splines: 27
  • Seal diameter: 56 mm
  • Outer splines: 36
  • ABS teeth: 48
Item no.:144359
  • Position: Inner
  • Inner splines: 29
  • Splines gearbox side: 35
  • Seal diameter: 35 mm
  • Outer diameter: 105 mm
Item no.:219366
  • Position: Front right
  • Splines gearbox side: 26
  • Splines wheel side: 36
  • Total length: 977 mm
  • ABS teeth: 48
Showing 1–24 of 47 products

Volvo S60 T3 drivetrain

The drivetrain in a Volvo S60 T3 is a sophisticated setup that requires precise components to maintain the car's performance and safety. The T3 variant, renowned for its balance of efficiency and power, places specific demands on the parts transmitting torque from the engine to the wheels. Because the Volvo S60 is engineered to deliver a stable, comfortable driving experience, every part of the drivetrain is sized to withstand the forces encountered in both city driving and at motorway speeds. Choosing the right spare parts is not merely a matter of function, but also of preserving the car's original handling characteristics. With us, you will find a range tailored specifically to this model version, ensuring every component works in perfect harmony with the rest of the vehicle. We understand the importance of keeping your Volvo S60 in top condition, which is why we only supply car parts that satisfy our rigorous quality standards.

How the drivetrain is configured on the Volvo S60 T3

The layout of the power transmission on the Volvo S60 T3 follows Volvo's classic front-wheel-drive design with a transversely mounted engine. Power flows from the engine through the gearbox and out to the driven wheels via two drive shafts. Each drive shaft is fitted with an inner and an outer CV joint. The inner joint sits closest to the gearbox, and its primary task is to accommodate the axial plunging movements that occur as the suspension travels up and down. The outer joint, positioned at the wheel hub, allows the wheel to steer while power continues to be transmitted smoothly. Alongside these key components, ABS rings are fitted to allow the car's safety systems to read wheel speeds accurately. The entire assembly relies on intact CV boots and optimal lubrication. Defect in a part as small as a rubber boot can quickly cause the entire constant velocity joint to fail due to ingress of dirt and moisture.

Common faults and symptoms

Identifying drivetrain issues early can save substantial repair bills and prevent you from being stranded at the roadside. One of the most typical signs of a worn outer CV joint is a rhythmic clicking noise that becomes clearly audible on full steering lock under acceleration. If you instead experience vibrations through the steering wheel or the car's chassis under acceleration, this can point to a worn inner CV joint or an unbalanced driveshaft. Another frequent symptom on the Volvo S60 T3 is an illuminated ABS warning light or erratic stability control intervention. This is often caused by a cracked or corroded ABS reluctor ring disrupting the sensor signal. It is also wise to check for grease splatters on the inside of the wheel rim or inside the wheel arch, which indicates a split CV boot. Caught early enough, replacing the boot in good time can prevent damage to the joint itself.

Common parts to replace on the Volvo S60 T3

When it comes to maintaining your Volvo S60 T3, certain components are naturally subjected to more wear and tear than others. In our range, we have selected the most critical parts so you can quickly find exactly what you require. We stock dedicated components for this model across our primary subcategories. Drive shafts are complete assemblies often replaced when both the inner and outer joints are worn, or if the shaft has suffered mechanical damage. For more targeted repairs, we supply individual CV joints—both inner and outer—which offer a cost-effective alternative if the bare shaft remains in good condition. The ABS ring is another frequent replacement part that is relatively straightforward to renew yet vital for the car's active safety systems. By choosing the correct part from the start, you ensure your Volvo continues to run smoothly, safely, and quietly on the road.

Finding the right part for your Volvo S60 T3

Browse directly to the relevant category for your Volvo S60 T3:

When dealing with potential drivetrain issues, starting in the right category saves valuable time. By comparing the exact component sections for the Volvo S60 T3, it is straightforward to distinguish between faults in the drive shaft, CV joint, or prop shaft and proceed directly to the parts that match your symptoms and vehicle specification.

Once you have selected the right category, you can easily compare technical specifications and photos to feel completely confident in your choice before placing your order.

Why buy from cvjoint24.com?

As a Swedish driveline specialist shipping across the EU, we offer a unique combination of in-depth product knowledge and high service standards. We focus exclusively on power transmission, giving us specialist expertise that general car parts retailers rarely match. When you order from us at cvjoint24.com, you can rely on our fitment accuracy when selecting your Volvo S60 T3 by make, model, and engine variant. We understand how essential your car is to daily life, which is why we dispatch promptly from our warehouse in Helsingborg, Sweden, to keep garage downtime to a minimum. Our goal is to make purchasing the right replacement components straightforward, reliable, and cost-effective. With our focus on quality and engineering precision, we ensure your Volvo receives the parts it deserves, backed by the dedicated guidance only a true specialist provides.

Frequently Asked Questions about Drivetrain Parts for Volvo S60 T3

How do I know whether to replace the entire drive shaft or just a CV joint on my Volvo S60 T3?

If only one joint is worn or damaged and the shaft itself is straight and free from corrosion, replacing just the CV joint may be sufficient. However, if both joints are worn or the shaft causes vibrations, replacing the complete drive shaft is often more cost-effective and reliable.

What are the most common signs of a failing outer CV joint?

The most common symptom is a clicking or knocking noise when turning sharply, particularly under acceleration. The noise usually disappears when driving in a straight line.

Do all drive shafts fit every Volvo S60 T3 model?

No, there are variations depending on whether the car has a manual or automatic gearbox, as well as the model year. Always select your car's make, model and engine variant in our selector to ensure you get the correct part.

Why has the ABS warning light come on in my Volvo S60 T3?

A very common cause is that the ABS ring on the drive shaft has cracked or become clogged with dirt, preventing the wheel speed sensor from reading the wheel's rotation accurately.

What happens if I continue driving with a split CV boot?

If the boot is torn, lubricating grease leaks out while road dirt and moisture penetrate inside. This causes the CV joint to wear out very rapidly, which can result in complete failure and leave you stranded without drive.

Do you offer a fitment guarantee on parts for the Volvo S60 T3?

Yes, we always provide a fitment guarantee when you choose your specific make, model and engine variant on our site. This ensures that the component you order is technically compatible with your vehicle.